• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.121-126
• /
• 2011

An accumulator placed on the refrigerant cycle pipe lines is a part to relax fluctuations of pressure within the pipe lines and stabilize refrigerants flowed into pipe. The accumulator has been mainly manufactured by the process of tube spinning using CNC(Computer Numerical Control) lathe. However, this process has the defects which are low productivity per hour and high cost. For that reason, tube end-forming using roll die is actively being developed, recently. The purpose of this study is to develope the tube end-forming process using roll die in order to manufacture the accumulator for the refrigeration pipe lines. First, the process design of tube end-forming was performed based on specification of product, and then was verified with FE analysis. Also, the effects of friction coefficient and revolution speed of roll die on forming load were investigated. The analytical results were applied in the final process design of tube end-forming. Finally, tube end-forming test was carried out to verify the validity of the FE analysis and the process design.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.457-469
• /
• 2007

Process Capability Indexes(PCI) are used as the measure for evaluation of process capability analysis and is the statistical method for efficient process control. The fourth generation $PCI(C_{psk})$ is constructed from $C_{pmk}$ by introducing the factor $\mid\mu-T\mid$ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T And Process Incapability Indexes(PII) are presented by inversing PCI and include the information of PCI. This paper introduces the PII $C_{ss}^*$ provide manager with various information of process and include Gage R&R. PII $C_{ss}^*$ is presented by inversing PCI $C_{psk}$ and include the information of PCI $C_{psk}$.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.3
• /
• pp.129-135
• /
• 2012

A number of surface mount technology (SMT) process variables including land design are considered for minimizing tombstone defect in flexible printed circuit assembly in high volume manufacturing. As SMT chip components have been reduced over the past years with their weights in milligrams, the torque that once helped self-centering of chips, gears to tombstone defects. In this paper, we have investigated the correlation of the assembly process variables with respect to the tombstone defect by employing statistically designed experiment. After the statistical analysis is performed, we have setup hypotheses for the root causes of tombstone defect and derived main effects and interactions of the process parameters affecting the hypothesis. Based on the designed experiments, statistical analysis was performed to investigate significant process variable for the purpose of process control in flexible printed circuit manufacturing area. Finally, we provide beneficial suggestions for find-pitch PCB design, screen printing process, chip-mounting process, and reflow process to minimize the tombstone defects.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.215-221
• /
• 2016

We conducted a phased electromagnetic forming process analysis (EFPA) over time through a coupling of electromagnetic analysis and structural analysis. The analysis is conducted through a direct linkage between electromagnetic analysis and structural analysis. The analysis process is repeated until the electric current is completely discharged by a formed coil. We calculate the forming force that affects the workpiece using MAXWELL, a commercial electromagnetic finite element analysis program. Then, we simulate plastic behavior by using the calculated forming force data as the forming force input to ANSYS, a commercial structure finite element analysis program. We calculate the forming force data by using the model shape in MAXWELL, a commercial electromagnetic finite element analysis program. We repeat the process until the current is fully discharged by the formed coil. Our results can be used to reduce the error in data transformation with a reduced number of data transformations, because the proposed approach directly links the electromagnetic analysis and the structural analysis after removing the step of the numerical analysis of a graph describing the forming force, unlike the existing electromagnetic forming process. Second, it is possible to simulate a more realistic forming force by keeping a certain distance between nodes using the re-mesh function during the repeated analysis until the current is completely discharged by the formed coil, based on the MAXWELL results. We compare and review the results of the EFPA using the peak value of the forming force that acts on the workpiece (which is the existing analysis method), and the proposed phased EFPA over time approach.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.487-494
• /
• 2013

Purpose: In this study, we propose the precision guided munitions verification methodology using the statistical analysis method has been proposed. and it can be applied to the precision guided munitions quality assurance work. Methods: This modeling is based on Failure Mode and Effects Analysis, Statistical Process Control, Defense Quality Managerment System, Production Readiness Review, Manufacturing Readiness Assesment and so on. Results: The Process Control Modeling that has the following procedures ; searching the critical to quality, statistical analysis by process, verify process. Moreover, the effectiveness of the methodology is verified by applying to the precision guided munitions. Conclusion: To achieve a analysis methods of statistical process control and verify process for precision guided munitions.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.34-45
• /
• 2001

This study uses MATLAB as a programming tool and applies the bootstrap method to process capability analysis. The advantage of using MATLAB in bootstrap method is to make the bootstrap method much easier to implement and apply particularly in process capability analysis. An example is provided to further illustrate the easy use of MATLAB in bootstrap method.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.53-59
• /
• 2001

To decrease of deviations from target specifications and excessive variability around targe, we exclusively designed statistical process control system involving general manager and expert tool for cigarette manufacturing process. This system is a unique programming environment for the development of total process control software including various control charts according to data type and process capability analysis. Also this system includes the statistical analysis module to analyze defective causes immediately when inferior products are made and the module to offer regular reports. This system is customized considering the manufacture environment based on the opinions of workers.

• Journal of Korean Academy of Nursing Administration
• /
• v.10 no.1
• /
• pp.141-159
• /
• 2004

Purpose: The purpose of this study was to investigate the degree of information technology application, and to identify the effect of information technology application en knowledge management process in clinical nurses. Method: Participants were 629 regular clinical nurses who had worked for over 1 year in general units of 9 tertiary medical hospitals including 2 national university hospitals, 5 university hospitals, and 2 hospitals founded by business enterprises. Data were collected from March to May 2003 through questionnaires. Thee structured instruments were used to collect the data: Information Technology Application scale, Knowledge Management Process Scale(Jeong, Lee, Lee, & Kim, 2003), and one for general characteristics. The data were analyzed using reliability analysis, descriptive analysis, one-way ANOVA, $Scheff{\acute{e}$ test, correlation analysis, partial correlation analysis, and multiple regression analysis with the SPSS for Windows 10,0 program. Result: 1) The HIS application degree, IT application ability, and IT application frequency were significantly correlated with the degree of knowledge management process activation and 4 elements of knowledge management process, Knowledge Creation, Knowledge Storage, Knowledge Sharing, and Knowledge Utilization(p=.000). 2) The 3 variables, HIS application degree, IT application ability, and IT application frequency explained 47.2% of the total variance of the degree of knowledge management process activation, and 352% of me total variance of Knowledge Storage. And 2 variables, HIS application degree and IT application frequency explained 17.6% of the total variance of Knowledge Creation, 39.9% of the total variance of Knowledge sharing, and 33.8% of the total variance of Knowledge utilization(p=.000). 3) As a result of multiple regression analysis, the key determinant of the degree of knowledge management process activation for nurses was HIS application degree The HIS application degree, IT application frequency, position, IT application ability, and continuous total numbers of years working at the present hospital explained 51.1% of the total variance of the degree of knowledge management process activation(p=.000). Conclusions: These results suggest that the information technology application positively affects the nurses' knowledge management process. From the above findings, information technology application is empirically verified as a useful and effective method to activate knowledge management process, and knowledge management.

• Journal of the Korean Society of Systems Engineering
• /
• v.3 no.2
• /
• pp.33-38
• /
• 2007

This paper describes a basic process of reliability analysis in shipped guided weapons. The OMS/MP provides originating data for RAM analysis. However, The process of reliability analysis is often done with an insufficient understanding of OMS/MP. This work proposed the improved reliability analysis process with Relax. It is shown that the process is applicable to shipped guided weapons.