• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.210-221
• /
• 2000

Plastic mold designers and frequently faced with optimizing multi-quality issues in injection molded parts. These issues are usually in conflict with each other and thus tradeoff needs to be made to reach a final compromised solution. in this study an automated injection molding design methodology has been developed to optimize multi-quality characteristics of injection molded parts. The features of the proposed methodology are as follows : first utility theory is applied to transform the original multi-objective problem into single-objective problem. Second is an implementation of a direct search-based injection molding optimization procedure with automated consideration of robustness against process variation. The modified complex method is used as a general optimization tool in this study. The developed methodology was applied to an actual mold design and the results showed that the methodology was useful through the CAE simulation using a commercial injection molding software package. Applied to production this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

• Journal of Arbitration Studies
• /
• v.15 no.3
• /
• pp.27-54
• /
• 2005

In the era of globalization firms must operate all useable resources into marketing activities to survive on the unlimited competition. However, firms face many kinds of disputes with counterparts because of aggressive marketing activities. There are two ways of solving these disputes : litigation and arbitration. As compared to litigation, arbitration is more popular because of such merits as the enforcement of arbitral award in foreign countries, the single trial system, the settlement by specialists, and the confidential proceedings. This paper examines trade firms' perception on the arbitration system and the effects of the advantages of arbitration and quality of arbitrators on the outcome of arbitration. The results show that the advantages of arbitration and quality of arbitrators influenced positively on the outcome of arbitration, but influenced negatively on the closed-door of arbitration procedures and a fair procedure of arbitrator. Though this paper has several limitations, this paper may contribute to figure out the relationship between arbitration merits and quality of arbitrator and outcomes as a first empirical paper and to suggest future research method and direction.

• Asian Oncology Nursing
• /
• v.3 no.1
• /
• pp.45-55
• /
• 2003

Self-help group program is an elective procedure intended to improve the quality of life of women undergoing mastectomy. The purpose of this study is explore effects of the self-help group program for QOL after mastectomy. 40 Women who had undergone mastectomies between stagel to 3 were recruited. Subjects of experimental group attended the self-help group for 4 weeks. Data were collected by self-reporting questionnaire. QOL was assessed using the Quality of Life Scale(QLS) translated by Kwon(1990). As a results, no significant differences were found between experimental and control group in changes of QOL. But, experimental group increased QOL score. In conclusions, when the self-help group program is provided to the patients with breast cancer, it can be helpful for promoting QOL and emotional support, even no statistical difference. For the further study, repeated researched with appropriate duration of intervention is suggested. Significant anxiety about their disease and fear of recurrence will be persisted despite intervention.

• Asian Journal of Business Environment
• /
• v.7 no.1
• /
• pp.31-36
• /
• 2017

Purpose - The purpose of the study was to develop a reliable measurement tool for the evaluation of TQM application in Greek education settings and to examine the factors that determine quality of education. Research design, data, and methodology - A questionnaire commencing from the questions included in the Application Guide of Common Assessment Framework was used for research purposes. Each item was scored on a 5point Likert scale - to a sample of 112 educators (55 men, 57 women), all teachers working in public primary education schools. Factor analysis resulted in a questionnaire of 43 items consisting of five factors, teacher satisfaction, school management and operation, motivation, effectiveness of public school leadership and finance management. Results - Results revealed a positive correlation among all factors. Reliability results using Cronbach's α was high (a=.961) for all factors of the questionnaire ranging from α=.930 (for motivation) to α=.797 (for financial management). Additionally, ICC procedure revealed high values for the above mentioned factors. Conclusions - The study resulted in the construction of a reliable questionnaire focused exclusively on TQM that can be used in future studies using larger samples in different areas so as to draw useful conclusions regarding TQM application in Greek education settings and further identify the factors determining quality in education.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.459-476
• /
• 2013

Receptor models have been rapidly developed to manage the ambient air quality and to establish effective emission reduction strategies. The models are used to identify various emission sources and apportion quantitatively the ambient pollutant mass based on various measured physico-chemical properties of the air pollutants at the receptor site. Many types of receptor models have been applied to estimate source contributions since those provide fundamental information when establishing reasonable environmental policies in Korea and Foreign countries. In this paper, we will introduce the basic concept and principal of the receptor model, various types of existing models with discussing strong and weak points for each model, and performance procedure of PMF model as the most popular model in the world. Further the trends of receptor modeling studies in Korea and other countries were provided. Finally, the improvement directions of the modeling works for the national and local air quality management were suggested in this paper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.18
• /
• pp.71-80
• /
• 1988

Process capability implies the qualitative capability of a process, and it is necessary to specify the process capability by quantification and to evaluate the level with the specified standardizaion. But the process capability index is currently used to evaluate the performance of quality control activity. without considering the characteristics of process structure or the economy of management. Here the researcher would like to redefine process capability and emphasize its index may be used as the measure of managerial assessment and the objective of process quality control in full consideration of the economic aspects of process characteristics. Too little or too much process capability causes a loss of or excess. The proper economic level of process capability varies to each process. The procedure of taking the optimum process capability index is derived from the expected profit function, whereas each method is studied in cases of normal process with one-sided specification and two-sided specification. In addition, the process capability index is presented as a method of quality assurance. And an example is exhibited on wrapping process of 'A' company. The results of this study are summarized at follows. First, though the norminalization of the process capability index is possible by the existing methods, the optimum process capability index can vary to the situation of each process. So, the optimum process capability index which is suggested in this dissertation should be used as the standard to assess process capability. Second, the process capability index can take its effect not just in indicating quality control or managerial records but also in the management of high qualify assurance.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.533-543
• /
• 2022

Purpose: The purpose of this study is to identify and resolve the causes of defects in the unmanned aerial vehicle launch system(propulsion wire fracture, rear rail deformation) and to prevent recurrence. Methods: The causes of the two defects were derived through fault tree analysis for each of the two defects and fault reproduction tests. In the case of propulsion wire, the installation of a high speed camera to check the behavior of wire was the driving force behind the defect resolution. Results: The results of this study are as follows; It was determined that the thickness of the washer was less than the maximum tolerance of the pulley was the cause of the propulsion wire fracture defect. Failure to comply with the launch procedure and insufficient safety margin were judged as the cause of the rear rail deformation defect. Accordingly, the configuration was changed to remove each defect. Conclusion: The case of this study was conducted to eliminate defects in the launch system for UAV. The causes of defects were estimated through fault tree analysis. After the configuration change, Structural analysis and launch tests were performed to demonstrate the safety and effectiveness of the modified configuration. As a result, the effect of the modified configuration was verified.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.8.1-8.7
• /
• 2021

Objectives: The reliability and educational quality of videos on YouTube for patients seeking information regarding instrument separation in root canal treatment were evaluated. Materials and Methods: YouTube was searched for videos on instrument separation in root canal treatment. Video content was scored based on reliability in terms of 3 categories (etiology, procedure, and prognosis) and based on video flow, quality, and educational usefulness using the Global Quality Score (GQS). Descriptive statistics were obtained and the data were analyzed using analysis of variance and the Kruskal-Wallis test. Results: The highest mean completeness scores were obtained for videos published by dentists or specialists (1.48 ± 1.06). There was no statistically significant difference among sources of upload in terms of content completeness. The highest mean GQS was found for videos published by dentists or specialists (1.82 ± 0.96), although there was no statistically significant correlation between GQS and the source of upload. Conclusions: Videos on YouTube have incomplete and low-quality content for patients who are concerned about instrument separation during endodontic treatment, or who experience this complication during endodontic treatment.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.13-22
• /
• 2020

Reinforcement steel fixing is a skilled and manually intensive construction trade. Current practice for the quality assessment of reinforcement steel fixing is normally performed by fabricators and has high potential in having errors due to the tedious nature of the work. In order to overcome the current inspection limitation, this study presents an approach that provides visual assistance and inspection enhancement for inspectors to assess the dimensional layout of reinforcement steel fixing. To this end, this study aims to establish an end-to-end framework for rebar layout quality inspection using laser scanning and Augmented Reality (AR). The proposed framework is composed of three parts: (1) the laser-scanned rebar data processing; (2) the rebar inspection procedure integrating with AR; and (3) the checking and fixing the rebar layout through AR visualization. In order to investigate the feasibility of the proposed framework, a case study assessing the rebar layout of a lab-scaled formwork containing two rebar layers is conducted. The results of the case studies demonstrate that the proposed approach using laser scanning and AR has the potential to produce an intuitive and accurate quality assessment for the rebar layout.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.735-749
• /
• 2023

Purpose: The purpose of this study is to derive solutions and prevent similar cases from occurring by analyzing the causes of cracks found in temperature cycling tests of rocket motor. Methods: By combining the results of the current state confirmation test, non-destructive test, domestic and foreign rocket motor comparison test, cutting test, and adhesion test according to the number of times to apply mold release agent, a Cause and Effect Diagram analysis was performed to derive the cause of cracks. Results: Through this study, 26 factors that could cause cracking in rocket motors during temperature cycling tests were identified. Through various additional test results, a total of five causes were identified, including chemical and structural design of the joint between the propellant and stress relief insert, omission of procedure in the manufacturing procedures, natural aging due to temperature, and load accumulation due to temperature changes. The fundamental cause was confirmed to be insufficient consideration of the release properties of the propellant and stress relief insert. Conclusion: During the design process, it was confirmed that this could be solved by structurally or chemically designing the insert so that it does not combine with the propellant, or by applying a mold release agent during the manufacturing process.