• Journal of Educational Research in Mathematics
• /
• v.22 no.2
• /
• pp.203-227
• /
• 2012

This was to investigate how the slow learners who specially belonged to low-SES, or North Korean defectors showed their errors in mathematical learning. To conduct the study, two groups for each minority group participated in the study volunteerly during the Winter vacation, in 2011. Based on the preliminary interviews, a total of 15 units were given, focusing on building mathematical basic concepts. As results, they had some errors in common. They both were in lack of understanding of the terminologies and not able to apply the meanings of definitions and theorems to a problem. Because of uncertainty of basic knowledge of mathematics, they easily lost their focus and were apt to make a mistake. Also, they showed clear differences. North Korean defectors were not accustomed to using or understanding the meanings of Chines or English in Korean words in expressing, writing mathematical terminologies and reading data on the context. Technical errors, and misinterpreted errors were found. However, students from the low SES showed that they were familiar with mathematical words and terminologies, but their errors mostly belonged to carelessness because of the lack of mastering mathematical concepts.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.219-224
• /
• 2014

This study was conduct to the reduction and elimination of Limnoperna fortunei that problem in the facilities and water supply pipeline is done to review proposals for the controls. In order to effectively removal the larva and the adult of that, chlorination and being used to an existing method is to be commended. The water temperature of Limnoperna fortunei spawning season was ranged 16 to $17^{\circ}C$ during May to early November. A chlorination of this period is appropriate in order to control a larva. However, existing in the attached young and old shell at the same time consistently been deemed to apply, because it must be taken into account. The range of concentration of chlorination to control the biomass for Limnoperna fortunei was from 0.5 to 1.0 ppm. Proliferation attached to the mitigation or appropriate technology to solve the domestic situation the priorities of the choice of a more urgent. Also, the monitoring of water temperature and larva will constantly to be done. And development of larva monitoring method as well as after chlorine treatment is effective analysis needed. Finally, we are expecting to good use in validating the results presented in this study.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.57-71
• /
• 2016

The development of ocean industries is an existing and important problem for South Korea, which is mostly surrounded by sea and has a long coastline along three seas. It is necessary for researchers to make efforts to enhance its cost and time competitiveness, because many ocean-based activities have been carried out in harsh physical conditions when compared with land-based ones. One of these efforts to improve efficiency is to operate an Offshore Supply Base (OSB), which is a basic infrastructure required to develop ocean industries effectively. For this reason, the construction and operation of OSBs have become an issue in Korea. The relevant research is limited. Nevertheless, there are a few reports published by Korean research institution. They focus on promoting ocean industries and only mention the necessity of OSB as a promotion tool for the industries. This study on the other hand, addresses various issues on the construction of OSBs in Korea and suggests implications for them. To examine the conditions on the construction of OSBs in Korea, we conduct case studies of Houston and Singapore, the representative regions where a massive OSB has been constructed and operated. In addition, we use Analytic Hierarchy Process (AHP) to evaluate the relative priorities of the services provided by OSBs if constructed in Korea.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.279-285
• /
• 2016

With the development of nanotechnology, the amount of nanomaterials increases and the problems of environment and the toxic property associated with it have become a social problem. But regulations and laws of nanomaterials have not yet been established. The purpose of this study is to utilize as the database of safety guidelines for research activities' workers associated with nanomaterials to conduct a behavior evaluation of aluminium oxide, which is most widely used in thirteen kinds of WPMN manufactured nanomaterials in the country. The experiment proceeds in the chamber reduced to 1/6 size of the actual laboratory, the test method was performed in NIOSH 0500. As the results of the study, the mass concentration was in inverse proportion to the particle size of the nanomaterials. And the mass concentration during the operation of ventilation equipment was reduced to about 1/8 times. In the future, it can be utilized as the database of safety guidelines for research activities' workers associated with nanomaterials. However, in order to increase the reliability of the study, the experiment of the mass concentration by particle size and Condensation Particle Counters will be needed additionally.

• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.307-316
• /
• 2016

A user usually gets the same suggesting results as everyone else in most of the multimedia social services, nowadays. To address the challenging problem of personalization in the social network, we propose a method which exploits user's activities, user's moods, and user's friend relationships from the social network to build a decision-making system. Depending on a current state of the user's mood, this system infers the most appropriated video for the user. In the system, the user evaluates a set of the given recommendation methods which extract from the user's database social network and assigns a vague value to each method by a weight. Then, we find the fuzzy collection solution for the system and classify the set of methods into subsets, and order the subsets based on its local dominance to choose the best appropriate method. Finally, we conduct an experiment using the YouTube API with a lot of video types. The experiment result shows that the channel recommendation system appropriately affords the user's character, it is more satisfying than the current YouTube based on an evaluation of several users.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.136-142
• /
• 2016

As the rapid industrialization and modernization progress of the world it is becoming a fast-paced environment pollution. And, dust or environment pollution to solve reckless diggings of natural aggregate cause a serious problem. This study was used a Blast Furnace Slag and Combined Heat and Power Plant of Fly Ash as a cement substitute to reduce $CO_2$ emissions during cement production, this study intend to suggest it's result as basic data 'Properties of Artificial Stone interior or exterior materials type utilizing industrial by-product and waste resource' utilizing Waste Porcelain and Waste Glass. As a result, it was high strength that matrix added the Combined Heat and Power Plant of Fly Ash of addition ratio 40%. Also, pre-experiment was conduct as mixing ratio of waste glass, waste porcelain on the basis of the preceding experiment, proper mixing ratio was judged that proper of waste glass, waste porcelain was mixing ratio 60, 70 (%) of appeared surface aggregate ratio more than 45%.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.427-437
• /
• 1994

Optimal static load balancing in star network configurations is considered. Three kinds of load balancing direction strategies are considered. First, a job arriving at the peripheral nodes may be processed either where it arrived(origin node) or transferred directly to central node Second, a job arriving at the central node may be processed there, or transferred to lightly loaded peripheral nodes. A nonlinear optimization problem is formulated. Using the optimal solution, an optimal load balancing algorithm is derived for the second load balancing strategy. Third a job arriving at the central node or a peripheral node may be processed either at origin node or transferred to another lightly loaded node (central or peripheral). A load balancing algorithm is derived for the third load balancing strategy. The effects of these three load balancing strategies are compared by numerical experiments. During the conduct of these in numerical experiments, several interesting phenomena were observed. The third load balancing strategy improved performance more than the first two other strategies. The second load balancing strategy, as a whole, resulted in only slightly improved performance. Finally, of the central node has larger processing power than the peripheral nodes, the first and third load balancing strategies produce equal performance improvement.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.201-209
• /
• 2020

In this paper, we perform a case study of children's emotional care program that analyzes the emotional status through the drawings of children based on web system. In order to overcome spatial and temporal environment constraints, we have developed based on web system that performs to support the whole process from the request of analysis of children 's drawings to the feedback of the final result step by step. The online platform is designed to conduct observations for the purpose of primary screening using a smartphone, and then proceed to the offline secondary care linkage process based on the results. Then according to the results of the analysis, children and parents who need deep examination are figured out and professional institutions are linked to them for help. Parental stress had been analyzed to improve the accuracy of the test and to figure out the cause of the problem. The study was conducted on 2,532 children and their parents between the ages of 3 and 5 years attending a day care center. As a result, 564 children and 223 parents were figured out to be in need of secondary institutional care, and 311 parents were educated and counseled from the professional institutions.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.67-79
• /
• 2018

This paper provides theoretical deformation of lean concept and its application for usage of building information modeling (BIM) process. Recently, much research is focused on application of lean concept for more efficient usage of BIM. The lean theory and its basic function and feature is based on manufacturing industry. The manufacturing process can be improved by process re-engineering steps of lean concept which consist of the steps of value, value stream, flow, pull, perfection. However manufacturing process and construction process has different characteristics. Due to the differences, five steps of the traditional lean's process re-engineering can't be directly applied to the BIM based engineering process. In order to solve this problem, we conduct analysis on the characteristics of the manufacturing process and BIM based engineering. We propose modified and expanded concept of lean for process re-engineering and the modified theory was applied to the mechanical, electrical and plumbing (MEP) coordination process. Through the proposed 8 steps of methodology, 2D based process was changed to integrated and using BIM based MEP coordination process. In addition, the results showed the potentiality of cost reduction and process improvement. The results of this study can be a foundation for the theoretical combination of lean and a variety part of construction engineering process.