• 대한전자공학회논문지TC
• /
• 제41권1호
• /
• pp.35-44
• /
• 2004

Circulant Matrix Factorization (CMF)는 covariance 행렬의 spectral factorization된 결과를 얻을 수 있다. 우리는 얻어진 결과를 가지고 일반적으로 잘 알려진 방법인 Schur algorithm을 이용하여 finite impulse response (FIR)차 infinite impulse response (IIR) lattice 필터를 설계하는 방법을 제안하였다. CMF는 기존에 많이 사용되는 root finding을 사용하지 않고 covariance Polynomial로부터 minimum phase 특성을 가지는 polynomial을 얻는데 유용한 방법이다. 그리고 Schur algorithm은 toeplitz matrix를 빠르게 Cholesky factorization하기 위한 방법으로 이 방법을 이용하면 FIR/IIR lattice 필터의 계수를 쉽게 찾아낼 수 있다. 본 논문에서는 이러한 방법들을 이용하여 FIR과 IIR lattice 필터의 설계의 계산적인 예제를 제시했으며, 제안된 방법과 다른 기존에 제시되었던 방법 (polynomial root finding과 cepstral deconvolution)들과 성능을 비교 평가하였다.

• 가족자원경영과 정책
• /
• 제9권1호
• /
• pp.131-146
• /
• 2005

The farming type in Korea is predominantly a small farm managed by family members. This study mainly examines the current usage of the website of family farms as a management tool for small farm business and discusses the strategies for effective utilization of the website. A county that currently employs governmental project of information system was purposely selected. Among all the websites operated by small farm businesses in that county, websites of which purpose is introduction of the business, advertisement, or e-business were included for analysis; it yielded total seven websites, The study was conducted with two phases; on-line website analysis and interview with business owners. The websites were analyzed based on four categories; content, interface, design, and site management. With regard to the content of the websites, the lack of connection between domain names and product names was found. Moreover, the problem relevant to site management was shown as low utilization of bulletin boards and delayed upload of new information. However, design and interface were comparatively well presented. Business owners reported that the motivation to initiate the websites was mostly supports from the governmental project for the agricultural information system. The barriers to effective management of websites were found i) business owner's misinterpretation of business website with e-business ii) very limited opportunity for website management education in small farm business, and iii) lack of regional infrastructure for information system. Based on the findings, this study suggests as followed; i) construction of infrastructure should be preceded to make effective management for websites; ii) education for website management should include small business management strategies as well as computer skills, iii) the education should be provided in diverse ways considering subject's characteristics iv) small farm business owners should be informed that their websites could play a role only to provide information about the products and hand over the practical load for e-business to retailing web sites such as portal shopping mall; and v) wives' participation should be encouraged.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1033-1042
• /
• 1994

2차원 경계요소-유한요소 연계법을 사용하여 구형 수조구조물의 동적거동 특성을 파악하였다. 비점성, 비압축성 이상유체의 운동은 경계요소법으로 모델링하였으며 구조물의 운동은 유한요소법으로 모델링하였다. 경계요소법의 적용시 Singularity를 소거한 경계적분식을 사용하였다. 유체와 구조물의 경계면에서 적합조건과 평형조건을 만족시킴으로써 경계요소와 유한요소를 연계하였다. 유체-구조물 상호작용의 영향은 유체의 부가질량행렬과 유체 유동에 의한 강성행렬로 연계된 유체-구조물계에 반영된다. 연계된 유체-구조물계의 고유치 문제로부터 수조구조물의 고유진동수외 고유모드를 구하였으며 수평 및 수직 자바운동에 의하여 수조구조물에 발생하는 유체동압력과 자유수면의 유동도 산출하였다.

• Composites Research
• /
• 제15권6호
• /
• pp.1-7
• /
• 2002

VARTM공정에서는 수지유동을 빠르게 하기 위해 투과촉진층이 사용되는데 투과촉진층과 섬유층 사이의 수지 속도차가 크다. VARTM제품은 길이에 비해서 두께가 얇으나 두 가지 다른 유통 매질 사이에 발생하는 lead-lag 유통을 관찰하기 위해서는 두께 방향을 고려한 3차원해석이 요구된다. 그런데 3차원 해석에 있어서 계산 시간이 문제가 된다. 일반 PC로 절점수가 많은 3차원 문제를 해석하려면 오랜 시간이 소요되므로 비실용적이다. 그래서 본 연구에서는 dual-scale 기법을 도입하여 전체 영역은 2.5차원으로 해석하고 주요한 관심 영역만을 3차원으로 해석하였다. 2.5차원 시뮬레이션만으로 예측하기 어려운 lead-lag 유동과 같은 특이한 유동 경향을 국부적인 3차인 해석을 통해서 발견학 수 있었다. 본 연구에서 개발된 global-local 해석기술은 일반 PC에서 적당한 계산 시간 내에 균일하지 않은 유동 매질 사이를 지나는 유동흐름의 특성 분석에 효과적으로 사용될 수 있다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.237-240
• /
• 2002

Knowing the dose distribution in a tissue is as important as being able to measure exposure or absorbed dose in radiotherapy. Since the Dry Imager spread, the wet type automatic processor is no longer used. Furthermore, the waste fluid after film development process brings about a serious problem for prevention of pollution. Therefore, we have developed a measurement method for the dose distribution (CR dosimetry) in the phantom based on the imaging plate (IP) of the computed radiography (CR). The IP was applied for the dose measurement as a dosimeter instead of the film used for film dosimetry. The data from the irradiated IP were processed by a personal computer with 10 bits and were depicted as absorbed dose distributions in the phantom. The image of the dose distribution was obtained from the CR system using the DICOM form. The CR dosimetry is an application of CR system currently employed in medical examinations to dosimetry in radiotherapy. A dose distribution can be easily shown by the Dose Distribution Depiction System we developed this time. Moreover, the measurement method is simpler and a result is obtained more quickly compared with film dosimetry.

• 한국산업정보학회논문지
• /
• 제17권2호
• /
• pp.19-27
• /
• 2012

In railway tunnel environment, the reliability of a high-data-rate and real-time train-to-wayside communication should be maintained especially when high-speed train moves along the track. In China and Europe, the communication frequency around 900 MHz is widely used for railway applications. At this carrier frequency band, both of the solutions based on continuously laid leaky coaxial cable (LCX) and discretely installed base-station antennas (BSAs), are applied in tunnel radio coverage. Many available works have concentrated on the radio-wave propagation in tunnels by different kinds of prediction models. Most of them solve this problem as natural propagation in a relatively large hollow waveguide, by neglecting the transmitting/receiving (Tx/Rx) components. However, within such confined areas like railway tunnels especially loaded with train, the complex communication environment becomes an important factor that would affect the quality of the signal transmission. This paper will apply a full-wave numerical method to this case, for considering the BSA or LCX, train antennas and their interacted environments, such as the locomotive body, overhead line for power supply, locomotive pantograph, steel rails, ballastless track, tunnel walls, etc.. Involving finite-difference time-domain (FDTD) method and uni-axial anisotropic perfectly matched layer (UPML) technique, the entire wireless RF downlinks of BSA and LCX to tunnel space to train antenna are precisely modeled (so-called integrative modeling technique, IMT). When exciting the BSA and LCX separately, the field distributions of some cross-sections in a rectangular tunnel are presented. It can be found that the influence of the locomotive body and other tunnel environments is very significant. The field coverage on the locomotive roof plane where the train antennas mounted, seems more homogenous when the side-laying position of the BSA or LCX is much higher. Also, much smoother field coverage solution is achieved by choosing LCX for its characteristic of more homogenous electromagnetic wave radiation.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.77-92
• /
• 2020

The present paper outlined a procedure for geometrically nonlinear dynamic analysis of functionally graded graphene platelets-reinforced (GPLR-FG) nanocomposite cylinder subjected to mechanical shock loading. The governing equation of motion for large deformation problems is derived using meshless local Petrov-Galerkin (MLPG) method based on total lagrangian approach. In the MLPG method, the radial point interpolation technique is employed to construct the shape functions. A micromechanical model based on the Halpin-Tsai model and rule of mixture is used for formulation the nonlinear functionally graded distribution of GPLs in polymer matrix of composites. Energy dissipation in analyses of the structure responding to dynamic loads is considered using the Rayleigh damping. The Newmark-Newton/Raphson method which is an incremental-iterative approach is implemented to solve the nonlinear dynamic equations. The results of the proposed method for homogenous material are compared with the finite element ones. A very good agreement is achieved between the MLPG and FEM with very fine meshing. In addition, the results have demonstrated that the MLPG method is more effective method compared with the FEM for very large deformation problems due to avoiding mesh distortion issues. Finally, the effect of GPLs distribution on strength, stiffness and dynamic characteristics of the cylinder are discussed in details. The obtained results show that the distribution of GPLs changed the mechanical properties, so a classification of different types and volume fraction exponent is established. Indeed by comparing the obtained results, the best compromise of nanocomposite cylinder is determined in terms of mechanical and dynamic properties for different load patterns. All these applications have shown that the present MLPG method is very effective for geometrically nonlinear analyses of GPLR-FG nanocomposite cylinder because of vanishing mesh distortion issue in large deformation problems. In addition, since in proposed method the distributed nodes are used for discretization the problem domain (rather than the meshing), modeling the functionally graded media yields to more accurate results.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.173-179
• /
• 2013

기존의 키 교환 프로토콜은 암호학적 방법들을 사용하여 비밀 키를 전달해왔지만, 공격자들로 하여금 다양한 공격을 받아왔었다. 이를 해결하기 위해 본 논문에서는 스테가노그라피 기법을 이용한 키 교환 프로토콜을 제안하였다. 스테가노그라피 기법은 이미지, 문서, 동영상, MP3 파일 등에 비밀 정보를 숨겨 공격자가 비밀 정보가 전달되고 있다는 것을 모르게 하는 방법으로 비밀 키를 공격자의 의심을 받지 않고 효율적으로 전달할 수 있다. 또한, 최근에 많이 사용되고 있는 2차원 바코드인 QR코드를 비밀 키가 삽입되는 이미지로 사용하여 공격자가 QR 코드를 스캔하여도 QR코드 생성 시 사용되었던 URL로 접속하게 되며 QR 코드에 비밀 키가 삽입된 것을 인식하지 못하게 한다. 실험을 통해서 기존의 스테가노그라피에서 사용되었던 이미지와 QR코드의 이미지의 변형 정도를 측정하여 QR 코드 이미지를 사용했을 때 효율성을 검증해본다.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.33-39
• /
• 2017

차량 네트워크, 분산 로봇과 사이버 물리 시스템 등 mission-critical 환경에서 동작하는 서비스들은 기존 서비스에 비해 latency에 대한 요구사항이 훨씬 엄격하다. 그 중 자율주행 차량 간 통신은 급격히 부상하고 있는 애플리케이션 영역으로 수 ms 수준의 엄격한 latency 요구사항을 가진다. 802.11p나 LTE-direct standards를 이용하는 현재 시스템은 이러한 수준의 ultra-low latency를 만족하지 못한다. 현재, 전체 latency의 상당부분을 medium access가 차지하기 때문에, 이 부분의 해결을 위해서는 Layer2를 수정할 필요가 있다. 따라서 본 논문에서는 MAC layer에 초점을 맞추어 coordinator에 의한 scheduling 없이 join/leave가 자유로운 Autonomous TDMA(ATDMA)를 고안하여 scalable하면서 latency가 보장되는 MAC을 구현하였다. 또한 WAVE 프로토콜과의 비교를 통해 알고리즘의 성능을 평가하였다.

• 농업과학연구
• /
• 제47권1호
• /
• pp.119-130
• /
• 2020

With the current rapid growth and increase in the world's population, the demand for nutritious food and fibers and fuel will increase. Therefore, there is a serious need for the use of breeding programs with the full potential to produce high-yielding crops. However, existing breeding techniques are unable to meet the demand criteria even though genotyping techniques have significantly progressed with the discovery of molecular markers and next-generation sequencing tools, and conventional phenotyping techniques lag behind. Well-organized high-throughput plant phenotyping platforms have been established recently and developed in different parts of the world to address this problem. These platforms use several imaging techniques and technologies to acquire data for quantitative studies related to plant growth, yield, and adaptation to various types of abiotic or biotic stresses (drought, nutrient, disease, salinity, etc.). Phenotyping has become an impediment in genomics studies of plant breeding. In recent years, phenomics, an emerging domain that entails characterizing the full set of phenotypes in a given species, has appeared as a novel approach to enhance genomics data in breeding programs. Imaging techniques are of substantial importance in phenomics. In this study, the importance of current imaging technologies and their applications in plant phenotyping are reviewed, and their advantages and limitations in phenomics are highlighted.