• Journal of Biomedical Engineering Research
• /
• v.27 no.5
• /
• pp.229-236
• /
• 2006

The acoustic field analysis method is the superior calibration method for rectifying the ultrasonic probe sensitivity. This method also can be applied to evaluate the probe performance in clinical fields without numerical analysis and precise measurements. In this paper, we propose the method of acoustic field pattern analysis with probe channel division for the evaluation of diagnostic ultrasound probe characterization. In order to verify our purpose, we performed a set of experiments. We measured the acoustic-field pattern of the three inferiority probes by channel division to evaluate an acoustic field distribution and impulse response characteristics. By comparing the results of acoustic field measurement method with that of conventional method such as impulse response and live image test for linear array probes, it is demonstrated that the ultrasound field measurement method is more effective then conventional method in detection of defective elements.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.347-352
• /
• 2006

This study was carried out to establish the optimum condition for cell disruption with a sonificator in the detection of the gram positive bacteria, Bacillus globigii and Streptococcus epidermidis for the purpose of developing automatic fluorometer. The efficiency of sonificator on the Bacillus globigii and Streptococcus epidermidis disruption differed greatly according to the diameter of sonificator probe tip. The larger sonificator probe diameter showed greater disruption. Bacillus globigii was more disruptive than Streptococcus epidermidis. Sonificator probe of the 13 mm diameter was the most efficient one when sample was sonificated for 20 seconds. The detection limits of Bacillus globigii and Streptococcus epidermidis were $10^5CFU/m{\ell}\;and\;5{\times}10^5CFU/m{\ell}$ respectively when samples were sonificated for 20 seconds with a sonificator probe of 13 mm diameter.

• Transactions of Materials Processing
• /
• v.15 no.1 s.82
• /
• pp.21-26
• /
• 2006

A optical head unit for nano optical probe array was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.133-133
• /
• 2011

최근 연구중인 소자들의 크기가 점차 나노 크기를 가짐에 따라서 나노 영역에 대한 물성 분석 연구의 필요성이 대두되고 있다. 특히 나노 크기를 가지는 소자에 대한 기계적 특성은 기존의 마이크로 이상의 소자와는 다른 특성을 보이는 것으로 보고되고 있다. 그러나 이러한 나노 크기에 대한 연구에서 대부분을 차지하는 분광학적, 전기적 방법은 측정 영역 한계와 일정 깊이에 대한 평균적인 정보를 제공하게 된다. 본 연구에서는 나노트라이볼로지 분석의 대표적인 Nano-indenter와 Scanning Probe Microscopy(SPM) 분석을 통하여 박막의 수 혹은 수십 나노 미만의 영역과 깊이에 대한 기계적 물성을 연구하였고, 이를 기반으로 수십 나노 이하 두께를 가지는 W-N 확산박지막에 대한 연구를 실시하였다. 연구 결과에 의하면, 박막의 표면 hardness는 박막의 두께가 감소함에 따라서 4.19 GPa에서 3.51 GPa로 감소하였고, Weibull modulus를 통한 박막의 균일도는 2.75에서 7.91로 급격히 증가하는 현상을 나타내었다. 또한 SPM의 Kelvin probe force microscopy (KPFM), Force modulation microscopy (FMM) mode를 활용하여 표면에서의 Nitrogen 흡착에 의한 영상, 전기적 및 표면 탄성에 대한 연구를 실시하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.67-67
• /
• 1990

Three non-ionic and two anioinic spin probes, differing in size and substituent, were synthesized. Their mobility in dried nylon 6 film was investicated by the spin probe technique using electron spin resonance spectrometer. When the size of a spin probe was large and the interaction between the probe molecules and polymer chains existed, the mobility of spin probes decreased. From Arrhenius plots of rotational correlation time, one discontinuity point ($T_d$) was determined. The activation energies for rotation below and above $T_d$ were discussed in terms of the mode of probe rotation. Three spin probes could be viewed as azo dyes having a built-in nitroxide radical. Photolysis of them in dimethylformamide and in nylon 6 film was performed by exposure to 254 nm UV light in the presence of air. It was found that dyes having a built-in nitroxide radical showed better photostability than dyes derived from ${\bata}-naphthol$..

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.29-34
• /
• 2005

A optical head unit for nano optical probe away was developed. The optical probe array is generated by Talbot effect. The shape and thickness of microlens array(MLA) were designed to minimize the spot size at the foci of MLA. To increase the optical efficiency of the system and obtain the large tolerance for fabrication, aperture size was theoretically optimized. Then microlens illuminated aperture array(MLIAA) as an optical head unit was fabricated using a ultra violet(UV) molding process on aluminum aperture array. In this process, Al aperture array was fabricated separately using the photolithography and reactive ion etching(RIE) process. Optical properties of the generated optical probes were measured and compared at Talbot distance from the aperture array having a diameter of $1{\mu}m$ and MLIAA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.158.2-158.2
• /
• 2013

저온 플라즈마는 물리적인 연구로부터 사용되는 DC glow 방전에서 반도체 공정장비에 이르기까지 많은 분야에 사용되고 있다. 이러한 플라즈마 연구 및 응용은 기본적인 플라즈마 진단에 바탕을 두고 있다. 특히 플라즈마의 전자밀도, 전자온도, 플라즈마 Potential 등은 공정에 중요한 변수이다. 이러한 플라즈마 변수들을 측정하기 위해서 일반적으로 Langmuir probe를 많이 사용하고 있다. 최근에는 Cutoff probe에 대한 연구도 많이 진행되고 있다. 본 연구에서는 두 가지 탐침측정방법을 통해 플라즈마변수를 진단한다. 그리고 각각의 진단방법에 대한 장단점을 실증적으로 비교하고 검증하며, 그 결과에 따라 탐침의 구조를 개선한다. 또한, 전자에너지 분포함수(EEDF)도 S/W, H/W적으로 분석을 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.867-868
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.97-98
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.665-666
• /
• 2007