• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.239-246
• /
• 2017

RC(Reinforced Concrete) structures can keep their performance during intended service life through initial service life and extension of the life through repairs. In the deterministic repairing method, cost and the related $CO_2$ emission increase with step-shaped escalation, however continuous results can be obtained through probabilistic repairing technique, and this is capable of reducing $CO_2$ emission through $CO_2$ absorption. In the work, repairing timing and $CO_2$ emission/absorption are evaluated based on the different methods like deterministic and probabilistic manner. The probabilistic technique considering $CO_2$ absorption with carbonation progress is evaluated to be very effective to reduction of $CO_2$ emission through extension of initial and additional service life due to repairs. When the variations of the service life from initial construction and repair material can be determined, the proposed technique can contribute to reduction of cost and $CO_2$ with decreasing repairing number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1188-1197
• /
• 2010

A most important thing in a connected dominating set(CDS)-based routing in a wireless ad-hoc network is to select a minimum number of dominating nodes and then build a backbone network which is made of them. Node failure in a CDS is an event of non-negligible probability. For applications where fault tolerance is critical, a traditional dominating-set based routing may not be a desirable form of clustering. It is necessary to minimize the frequency of reconstruction of a CDS to reduce message overhead due to message flooding. The idea is that by finding alternative nodes within a restricted range and locally reconstructing a CDS to include them, instead of totally reconstructing a new CDS. With the proposed algorithm, the resulting number of dominating nodes after partial reconstruction of CDS is not changed and also its execution time is faster than well-known algorithm of construction of CDS by 20~40%. In the case of high mobility situation, the proposed algorithm gives better results for the performance metrics, packet receive ratio and energy consumption.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.74-80
• /
• 2019

In domestic construction industry, CM companies perform overall project management tasks such as planning, designing, construction management, evaluation, maintenance for construction projects. However, even with these tasks, as competition becomes more fierce and probability dependence is high, lots of CM companies are experiencing difficulties of securing and preparing indicators for order competence reinforcement. This study examines domestic business condition and task analysis. Also Competence factors are derived through institutional and legal investigation, and review of existing literature. The derived competence factors are focused on practical factors by interviewing with experts. competence factors for each type were classified into BSC's four perspectives(Finance / Customers / Internal processes / Learning and Growth) and surveyed. Based on the results of the survey, the priorities of competence factors that companies should focus on were derived. The purpose of this study is to contribute on making an indicator that can be utilized on business activities through priority analysis of competence factors for order competitiveness reinforcement of CM companies.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.84-95
• /
• 2019

This paper reports the process of seismic fragility analysis for the rahman-type continuous bridge system. The target structure was the five span highway bridge with maximum pier hight of 72m. OpenSees software was used for the nonlinear time history analysis. In this study, 50 ground motions are considered for nonlinear time history analysis. For each ground motion, PGA was scaled from 0.1g to 2.0g with intervals of 0.1g in order to consider a wide range of the seismic intensity measure. In addition, yield displacement and ultimate displacement of each pier were calculated through section analysis. Based on the result of non linear time history analysis and section analysis, damage condition of target bridge was classified according to the definition of damage condition proposed by Barbat et al. As a result, it was predicted that Extensive Damage occurred at P1 when 0.731 g earthquake occurred in the longitudinal direction. Based on the seismic fragility analysis results, it is found that the probability of occurrence of Extensive Damage in the 4,800 - year period earthquake was about 4.2%. Therefore the target bridge has enough safety for earthquake.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.99-110
• /
• 2017

Improving tracking performance by estimating the status of multiple targets using radar is important. In a clutter environment, a joint event occurs between the track and measurement in multiple target tracking using a tracking filter. As the number increases, the joint event increases exponentially. The problem to be considered when multiple target tracking filter design in such environments is that first, the tracking filter minimizes the rate of false track alarmsby eliminating the false track and quickly confirming the target track. The purpose is to increase the FTD performance. The second consideration is to improve the track maintenance performance by allocating each measurement to a track efficiently when an event occurs. Through two considerations, a single target tracking data association technique is extended to a multiple target tracking filter, and representative algorithms are JIPDAF and LM-IPDAF. In this study, a probabilistic evaluation of many hypotheses in the assignment of measurements was not performed, so that the computation amount does not increase nonlinearly according to the number of measurements and tracks, and the track existence probability based on the track density The LM-IPDAF algorithm was introduced. This paper also proposes a method to reduce the computational complexity by improving the clutter density estimation method for calculating the track existence probability of LM-IPDAF. The performance was verified by a comparison with the existing algorithm through simulation. As a result, it was possible to reduce the simulation processing time by approximately 20% while achieving equivalent performance on the position RMSE and Confirmed True Track.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.2
• /
• pp.77-89
• /
• 2006

Objectives: Recent studies have shown that tailoring to women's individual beliefs and stage of cancer screening adoption increase the probability that cancer screening will ensue. To identify variables associated with cancer screening behavior, many studies for cancer screening have used the Transtheoretical Model(TTM). This study was carried out to identity the cognitive and behavioral factors associated with breast cancer screening by stages of change among women, forties aged. Methods: Building on the TTM constructs, we collected the data to test the association with cognitive and behavioral factors for breast cancer screening by stage of change among women, forties aged (N=232), using the self-reported questionnaire. The stages of change were grouped according to screening participation and intention for breast cancer as precontemplation, contemplation, preparation, action, and maintenance. We found out the association between breast cancer screening and cognitive and behavioral factors, and testified the difference between stages of change by chi-square test, one-way ANOVA, and multiple comparison analysis(Duncan test). Results: Analyses of 232 women showed that participation on mammography was 68.1% within lifetime and 46.1% within last 2 years, and we found out the association with breast cancer screening participation, intention and cognitive-behavioral factors. The stages of change based on participation and intention were different from the decisional balance, the screening attitude, and the self-efficacy(p<0.01). The decisional balance was differ from stages of change because the difference on opinions about pros(positives) and cons(negative) were likely to significant by stages of change(p<0.05, p<0.01). Conclusion: To increase the screening rate for breast cancer, it should be developed the tailored message and recommend guideline. And the tailored message should be designed to increase the pros of breast cancer screening(mammography) and to decrease the cons, and considered the woman's stage of adoption.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.42-48
• /
• 2006

The strategies of maintenance and operation are usually established based on the number of flaws and their size distribution obtained from nondestructive inspection in order to preserve safety of the plant. But non destructive inspection results are different from the physical flaws which really exist in the equipments. In case of a single inspection, it is easy to estimate the number of physical flaws using the POD curve. However, we may be faced with some difficulties in obtaining the number of physical flaws from the periodic in-service non destructive inspection data. In this study a simple method for estimating the number of physical flaws from periodic in-service nondestructive inspection data was proposed. In order to obtain the flaw growth history, the flaw growth was simulated using the Monte Carlo method and the flaw size and the corresponding POD value were obtained for each flaw at each periodic inspection time. The flaw growth rate used in the simulation was statistically calculated from the in-service inspection data. By repeating the simulation numerous flaw growth data could be generated and the effective POD curve was obtained as a function of flaw size. From the effective POD curve the number of physical flaws was obtained. The usefulness and convenience of the proposed method was evaluated from several applications and satisfactory results were obtained.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.315-324
• /
• 2003

Stream flow data was analyzed for determining the lowflow which is the standard for river maintenance flow. Lowflow quantiles were estimated based on the parametric and nonparametric methods and two methods were compared by Monte Carlo simulation study. As the results of the parametric method, three probability distributions such as gamma-2, lognormal-2 and Weibull-2, are selected as appropriate models for stream flow data of 13 stations in Han River Basins. According to simulation results, relative bias (RBIAS) and relative root mean square error (RRMSE) of the lowflow quantiles are the smallest when the applied and population models are the same. The fame statistical properties from the nonparametric models are good within the interpolation range. Among 7 bandwidth selectors used in this study, the RRMSEs of the Park and Marron method (PM) are the smallest while those of the Shoaler and Jones method (SJ) are the largest.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.997-1004
• /
• 2017

The life of elevator wire ropes is one of the most important characteristics of an elevator, which is closely related to the safety of users and its maintenance policy. It is not cost effective to measure the lifetime of elevator wire ropes during their use. In this study, the life estimation of elevator wire ropes (8x19W-IWRC) is considered using accelerated degradation test data. A bending fatigue tester is used to perform the accelerated degradation tests, incorporating the acceleration factor of tensile force. Assuming that the life of wire ropes is log-normally distributed, two life estimation methods are suggested and their results are compared. The first method estimates the life of wire ropes utilizing the accelerated life model with pseudo lives obtained from a linear regression model. The second method estimates the life using a logistic model based on failure probability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2019

A frequency hopping(FH) signal can change its carrier frequency during transmission and has spread-spectrum characteristics in these frequency bands. Therefore, FH signals are widely used in applications that require low-probability-of-intercept(LPI) and anti-jamming (AJ) abilities in wireless communication environments. In this study, the authors propose a method for generating hopping information (HI), which includes start time, dwell time, and hopping frequency for unknown FH signals. The proposed blind HI generation method produces signal detection information based on the spectrum data and then extracts HI using operational procedures for estimating the target FH signal's status, such as appearance, maintenance, and termination. Further, simulation results demonstrate that the proposed method provides accurate HI without detection omissions for various FH signals.