• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권1호
• /
• pp.1-3
• /
• 2009

Recently, Carlsson, Full\acute{e}$r and Majlender [1] presented the concept of possibilitic correlation representing an average degree of interaction between marginal distribution of a joint possibility distribution as compared to their respective dispersions. They also formulated the weak and strong forms of the possibilistic Cauchy-Schwarz inequality. In this paper, we define a new probability measure. Then the weak and strong forms of the Cauchy-Schwarz inequality are immediate consequence of probabilistic Cauchy-Schwarz inequality with respect to the new probability measure.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 경북지부 결성 및 추계학술발표회 논문집
• /
• pp.58-62
• /
• 1996

To check the variability of the effective diffusion coefficient in the unsaturated porous soil media. a Monte Carlo simulation was done for the equation suggested by Millington and Quirk(1961). The results shows that the probability density function of D$_{c}$/D$_{o}$ is positively skewed. It means the chance of having less effective diffusion coefficient values in the soil media than mean value is high. Also, the distribution types of D$_{c}$/D$_{o}$ are about same regardless of assumed distribution types of input parameters.ers.ers.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1280-1290
• /
• 2016

This paper presents an advanced estimation method for obtaining the probability density functions of a damage parameter for valve leakage detection in a reciprocating pump. The estimation method is based on a comparison of model data which are simulated by using a mathematical model, and experimental data which are measured on the inside and outside of the reciprocating pump in operation. The mathematical model, which is simplified and extended on the basis of previous models, describes not only the normal state of the pump, but also its abnormal state caused by valve leakage. The pressure in the cylinder is expressed as a function of the crankshaft angle, and an additional volume flow rate due to the valve leakage is quantified by a damage parameter in the mathematical model. The change in the cylinder pressure profiles due to the suction valve leakage is noticeable in the compression and expansion modes of the pump. The damage parameter value over 300 cycles is calculated in two ways, considering advance or delay in the opening and closing angles of the discharge valves. The probability density functions of the damage parameter are compared for diagnosis and prognosis on the basis of the probabilistic features of valve leakage.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.572-579
• /
• 1988

In this paper, a system of automatic placement and routing for gate array layout design is proposed. In the placement stage, the circuit is partitioned and using the concept of min-cut slicing, and each partitioned module is placed, so that the routing density over the entire chip be uniformized and the total wiring length be minimized. In the global routing stage, the concept of the probabilistic routing density is introduced to unify the wiring congestions in each channel. In the detailed routing stage, the multi-terminal nets are partitioned into the two-terminal nets. The ordered channel graph is proposed which implies the vertical and the horizontal constranint graphs simultaneously. And using the ordered channel graph, the proposed routing algorithm assigns the signal nets to the tracks. Also the proposed placement and routing algorithms are implimented on IBM/PC-AT to construct PC-level gate array layout system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.859-864
• /
• 2001

An effective live load model for analyzing probable maximum live load effects such as moment and shear in transverse direction was developed. The main procedure of this live load model is composed of four parts, i.e., firstly, determination of the appropriate influence lines in longitudinal direction, secondly, application of the characteristics of vehicles and traffic patterns in longitudinal direction, thirdly, determination of the appropriate influence lines in transverse direction, and fourthly, application of the characteristics of vehicles and traffic patterns in transverse direction. Through this procedure, the probabilistic distributions of maximum probable load effects are deduced in the form of probability density function (PDF) and/or cumulative density function(CDF). This live load model is able to consider local or global deterioration of bridges in the structural analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.865-870
• /
• 2001

An effective live load model for analyzing probable maximum live load effects in longitudinal direction such as moment and shear was developed. The main procedure of this live load model is composed of two parts. Firstly, determination of the appropriate influence lines, and secondly, application of the characteristics of vehicles and traffic patterns. Through this procedure, probabilistic distributions of maximum probable load effects are deduced in the form of probability density function (PDF) or cumulative density function (CDF). The proposed live load model is not limited by bridge types(number of spans or girders) and can consider local or global deterioration of bridges in the analysis. Besides, load effects can be determined at any section without restrictions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.427-432
• /
• 2005

This paper is concerned with a simultaneous design of TSK (Takagi-Sugeno-Kang)-linguistic fuzzy models with uncertain model output and the computationally efficient representation. For this purpose, we use the fundamental idea of linguistic models introduced by Pedrycz and develop their comprehensive design framework. The design process consists of several main phases such as (a) the automatic generation of the linguistic contexts by probabilistic distribution using CDF (conditional density function) and PDF (probability density function) (b) performing context-based fuzzy clustering preserving homogeneity based on the concept of fuzzy granulation (c) augment of bias term to compensate bias error (d) combination of TSK and linguistic context in the consequent part. Finally, we contrast the performance of the enhanced models with other fuzzy models for automobile MPG predication data and coagulant dosing process in a water purification plant.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.69-72
• /
• 2002

본 논문에서 화자공간모델 evolution에 기반한 continuous density hidden Markov model (CDHMM)의 online 적응에 대한 새로운 기법을 제안한다. 학습화자의 a priori knowledge을 나타내는 화자공간모델은 factor analysis (FA) 또는 probabilistic principal component analysis (PPCA)와 같은 은닉변수모델(latent variable model)에 의해 효과적으로 나타내어진다. 은닉 변수모델은 화자공간모델뿐아니라 CDHMM 파라메터의 ajoint prior분포를 표시함으로, maximum a posteriori(MAP)적응기법에 직접 적용되어진다. 화자공간모델의 hyperparameters와 CDHMM파라메터를 동시에 순차적으로 적응하기 위해 quasi-Bayes (QB)추정 기술에 기반한 online 적응기법을 제안한다. 연속숫자음 인식과 관련된 화자적응 실험을 통해 제안된 기법은 적은 적응데이터에서 좋은 성능을 나타내며, 데이터가 증가함에 따라 성능이 지속적으로 증가함을 보여준다.

• 대한전기학회논문지
• /
• 제33권10호
• /
• pp.381-386
• /
• 1984

This paper deals with the microcomputer realization of EMG pattern recognition system which provides identification of motion commands from the EMG signals for the on-line control of a prosthetic arm. A probabilistic model of pattern is formulated in the feature space of integral absolute value(IAV) to describe the relation between a motion command and the location of corresponding pattern. This model enables the derivation of sample density function of a command in the feature space of IAV. Classification is caried out through the multiclass sequential decision process, where the decision rule and the stopping rule of the process are designed by using the simple mathematical formulas defined as the likelihood probability and the decision measure, respectively. Some floating point algorithms such as addition, multiplication, division, square root and exponential function are developed for calculating the probability density functions and the decision measure. Only six primitive motions and one no motion are incorporated in this paper.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.631-641
• /
• 2020

In the present work, an approach for the multiple time probabilistic characterization of the response of linear structural systems subjected to random non-Gaussian processes is presented. Its fundamental property is working directly on the multiple time probability density functions of the actions and of the response. This avoids of passing through the evaluation of the response statistical moments at multiple time or correlations, reducing the computational effort in a consistent measure. This approach is the extension to the multiple time case of a previously published dynamic Probability Transformation Method (PTM) working on a single evolution of the response statistics. The application to some simple examples has revealed the efficiency of the method, both in terms of computational effort and in terms of accuracy.