DOI QR코드

DOI QR Code

Estimation of Probability Density Functions of Damage Parameter for Valve Leakage Detection in Reciprocating Pump Used in Nuclear Power Plants

  • Lee, Jong Kyeom (Division of Mechanical Engineering, Ajou University) ;
  • Kim, Tae Yun (Division of Mechanical Engineering, Ajou University) ;
  • Kim, Hyun Su (Division of Mechanical Engineering, Ajou University) ;
  • Chai, Jang-Bom (Division of Mechanical Engineering, Ajou University) ;
  • Lee, Jin Woo (Division of Mechanical Engineering, Ajou University)
  • Received : 2015.12.30
  • Accepted : 2016.04.16
  • Published : 2016.10.25

Abstract

This paper presents an advanced estimation method for obtaining the probability density functions of a damage parameter for valve leakage detection in a reciprocating pump. The estimation method is based on a comparison of model data which are simulated by using a mathematical model, and experimental data which are measured on the inside and outside of the reciprocating pump in operation. The mathematical model, which is simplified and extended on the basis of previous models, describes not only the normal state of the pump, but also its abnormal state caused by valve leakage. The pressure in the cylinder is expressed as a function of the crankshaft angle, and an additional volume flow rate due to the valve leakage is quantified by a damage parameter in the mathematical model. The change in the cylinder pressure profiles due to the suction valve leakage is noticeable in the compression and expansion modes of the pump. The damage parameter value over 300 cycles is calculated in two ways, considering advance or delay in the opening and closing angles of the discharge valves. The probability density functions of the damage parameter are compared for diagnosis and prognosis on the basis of the probabilistic features of valve leakage.

Keywords

References

  1. Y.J. An, B.R. Shin, Numerical investigation of suction vortices behavior in centrifugal pump, J. Mech. Sci. Technol. 25 (2011) 767-772. https://doi.org/10.1007/s12206-011-0108-6
  2. W. Wan, W. Huang, Investigation on complete characteristics and hydraulic transient of centrifugal pump, J. Mech. Sci. Technol. 25 (2011) 2583-2590. https://doi.org/10.1007/s12206-011-0729-9
  3. S.Y. Lee, Acoustic diagnosis of a pump by using neural network, J. Mech. Sci. Technol. 20 (2006) 2079-2086. https://doi.org/10.1007/BF02916324
  4. J.K. Lee, J.K. Jung, J. Chai, J.W. Lee, Mathematical modeling of reciprocating pump, J. Mech. Sci. Technol. 29 (2015) 3141-3151. https://doi.org/10.1007/s12206-015-0713-x
  5. J.J. Shu, C.R. Burrow, K.A. Edge, Pressure pulsations in reciprocating pump piping systems-Part 1: modeling, Proc. Inst. Mech. Eng. I J. Syst. Control Eng. 211 (1997) 229-235.
  6. D.N. Johnston, Numerical modelling of reciprocating pumps with self-acting valves, Proceedings of the Institution of Mechanical Engineers, Part I, J. Syst. Control Eng. 205 (1991) 87-96.
  7. P.J. Singh, N.K. Madavan, Complete analysis and simulation of reciprocating pumps including system piping, Proceedings of the Fourth International Pump Symposium, Texas, USA, 1987, pp. 55-73.
  8. S.D. Able, Reciprocating pump acceleration head, Proceedings of ASME FEDSM01-2001 ASME Fluids Engineering Division Summer Meeting, New Orleans, USA, 2001, pp. 1-7.
  9. J.J. Rudolf, T.R. Heidrick, B.A. Fleck, V.S.V. Rajan, Optimum design parameters for reciprocating pumps used in natural gas wells, J. Energy Resour. Technol. 127 (2005) 285-292. https://doi.org/10.1115/1.2000274
  10. T. Henshaw, Power pump valve dynamics-a study of the velocity and pressure distribution in outward-flow bevelface and flat-face power pump valves, Proceedings of 25th International Conference Pump Users Symposium, Texas, USA, 2009, pp. 23-32.
  11. D. Jarell, D. Sisk, L. Bond, Prognostics and Condition based maintenance (CBM)-A scientific Crystal ball, Pacific Northwest and National Laboratory, Richland, WA, International Congress on Advanced Nuclear Power Plants, Proc. Pac. Int. Congr. Adv. Nucl. Power Plants 194 (2002), 194-201-207.
  12. F.M. White, Fluid Mechanics, third ed., McGraw-Hill, New York, USA, 1994.
  13. A.G. Erdman, G.N. Sandor, Mechanism Design: Analysis and Synthesis/Diskette, second ed., Prentice Hall, New Jersey, USA, 1990.
  14. Y. Cengel, J. Cimbala, Fluid Mechanics: Fundamentals and Applications, third ed., McGraw-Hill, New York, USA, 2013.

Cited by

  1. Fault Diagnosis Method of Check Valve Based on Multikernel Cost-Sensitive Extreme Learning Machine vol.2017, pp.None, 2016, https://doi.org/10.1155/2017/8395252
  2. Numerical simulation of suction and discharge valves’ motion in reciprocating waterflooding pump vol.240, pp.None, 2016, https://doi.org/10.1088/1755-1315/240/3/032008
  3. Nonlinear dynamic modeling and fluid-mechanism interaction analysis of reciprocating pump-pipeline system vol.235, pp.6, 2021, https://doi.org/10.1177/0959651820965108
  4. Motion mechanism study on the valve disc of an ultra-high pressure reciprocating pump vol.160, pp.None, 2016, https://doi.org/10.1016/j.ymssp.2021.107942