• Journal of Technology Innovation
• /
• v.13 no.1
• /
• pp.25-54
• /
• 2005

In this study, priority setting model of new promising IT industries which will be the growth engines for the Korean IT industry, was established. Based on the AHP model, priority setting of IT new promising IT industries was conducted. Firstly, the selection cases of the new promising IT industries and major priority setting methodologies including the AHP methodology, were analyzed. The AHP model was selected as the most feasible methodology for priority setting of the new IT industries, among the various priority setting methodologies. Secondly, in setting up the AHP model for prioritization of the new promising If industries, a 'goal' was established to be priority setting of the new promising IT industries, and an 'alternatives' to be 18 new promising IT industries. Then a logical and a systematic assessment criteria including 5 main criteria('Technological Innovation', 'Market Ability', 'SPin-off Effect', 'Public Benefit', 'Strategic Importance') and 14 sub-criteria, were developed for priority setting of the 18 new promising industries. Finally, with the AHP model, the substantial analysis was made to set up priority of the 18 new promising IT industries. The substantial analysis showed the following priority setting results and implications for the 18 new promising IT industries.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.3
• /
• pp.243-261
• /
• 2006

Priority setting in national health insurances in major advanced countries and the nation was investigated to draw the criteria for priority setting and suggest the most rational criteria for dental insurance so as to help secure the efficiency of medicare financing and individual's health right and also elevate medical consumers' satisfaction with health insurance. 1. Priorities in national health insurance are different from country to country, depending on the medical security systems, priority introducing conditions, and social environment, but have many common factors. 2. The priority setting criteria for national health insurance in those countries include the following in common: the efficiency, equity, and cost effect of treatment, emergency of treatment, consumption of expense, efficacy of treatment, patient's receptiveness, patient's demand, severity of disease, and patient's responsibility for the disease. 3. In oral diseases, severe diseases including oral cavity cancer are low in rate, and in-hospital treatments are few. From the above findings, it is suggested that dental insurance should establish discriminative criteria for priority setting by reflecting the aspects of dental diseases and system difference between dental and other health insurances and taking account of efficiency of treatment through prevention, cost effect, prevalence and incidence of generalized diseases, and individual's financing burden.

• Health Policy and Management
• /
• v.16 no.1
• /
• pp.73-94
• /
• 2006

This study was carried out to show how the Analytic Hierarchy Process technique could be used in setting the priority among selected diseases to increase the range of health insurance benefit. Thirty experts, including doctors (group1), experts for preventive medicine or public health(group2), and representatives of the insured(group 3), participated in the study panel that is conducted for priority setting. They were asked to evaluate the priorities among 6 selected criteria and then 42 selected diseases. The results were as follows; First, representatives of the insured think that the magnitude of out-of-pocket payment should have high priority while doctors think that effectiveness of treatment should have high priority. Second, all experts think that catastrophic diseases such as malignant neoplasm, major heart disease, and cerebral vascular disease should have high priority in health insurance coverage even though there is little difference among groups. These results can be useful to establish a systematic strategy for expanding health insurance benefit package.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.119-120
• /
• 2006

Prioritizing the design specifications among many alternatives is necessary at the stage of concept design. Design specifications have trade-offs between cost and performance, and the relationships among them, in the standpoint of various functional requirements, are complex. AHP(Analytic Hierarchy Process) method is one of the most popular ways of solving the priority setting problem. However, it is impossible to monitor the interim findings in the middle of the process, it is hard to predict the difference when changing pairwise comparison conditions, and the operation done by one person makes it hard to share the process simultaneously. This paper shows a new method of priority setting in this kind of decision making problem. This method is designed to support the realtime priority setting among many design specifications with regards to many functional requirements. A new algorithm and visualization methods are introduced, and the usability is verified in an exemplary concept design stage.

• IE interfaces
• /
• v.15 no.4
• /
• pp.460-473
• /
• 2002

The objective of this paper is to design a Goal Alternatives Disposition System having three main subsystems for setting, evaluating and selecting goal alternatives. For setting of goal alternatives, System Alternatives Tree(SAT) structure will be developed, which has a computation algorithm for setting decision alternatives by the concept of System Priority Number(SPN). For evaluating and selecting of goal alternatives; First, Normative and Exploratory Priority Indices which consider technical performance to the goal, cost and feasibility are developed respectively. Second, Integrated Priority Index is built up to determine the total priority of the Goal Alternatives Disposition(GAD) system. For the design and verification of the GAD system, technological forecasting structure theory, systems engineering methodology will be used.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.816-826
• /
• 2012

Self-healing Ethernet rings show promise for realizing the SONET/SDH-grade resilience in Carrier Ethernet infrastructures. However, when a ring is faulty, high-priority protection messages are processed in less time than low-priority data frames are processed. In this situation, any delayed data frames either being queued or traveling through long ring spans will cause the ring nodes to generate incorrect forwarding information. As a result, the data frames spread in the wrong direction, causing the ring to become unstable. To solve this problem, we propose four schemes, that is, dual flush, flush delay timer setting, purge triggering, and priority setting, and evaluate their protection performance under various traffic conditions on a ring based on the Ethernet ring protection (ERP) method. In addition, we develop an absorbing Markov chain model of the ERP protocol to observe how traffic congestion can impact the protection performance of the proposed priority setting scheme. Based on our observations, we propose a more reliable priority setting scheme, which guarantees faultless protection, even in a congested ring.

• Journal of Biosystems Engineering
• /
• v.29 no.2
• /
• pp.187-194
• /
• 2004

The study focused on setting priority among the future core technologies that were derived by Delphi in agricultural management ＆ information using analytic hierarchy process(AHP). Items for setting priority were decided as ‘technology’, ‘market’, and ‘public concerns’by council. The future core technologies were divided into four parts by importance and R＆D level. Technologies which consisted of upper two parts having higher importance were considered in the study. Questionnaires were given to 9 specialists in biosystems engineering. As the results, ‘market’ was decided as a most important item. The most important technologies were ‘Developing technology and system of post harvest processing for higher quality rice’ in group I, and ‘Developing sensor technology to evaluate quality and safety for agricultural products’ in group II.

• Proceedings of the Technology Innovation Conference
• /
• 2002.02a
• /
• pp.183-203
• /
• 2002

The governments investment in R&D has rapidly increased so that a comprehensive and coherent approach to resource allocation has necessitated. Therefore the need for priorities in science and technology has been increased according to growing resources to science and technology. This study presents the methodology, process and results of priority-setting of national strategic technologies(IT, BT, NT, ST, ET, CT) through which 77 national key technologies are selected based on the criteria. Specifically it is intended to identify strategically necessary areas of focus for R&D, help leverage limited resources most effectively, and help coordinate government R&D activities by supplying ministries with a common set of priorities.

• Journal of Environmental Impact Assessment
• /
• v.21 no.5
• /
• pp.813-821
• /
• 2012

Environmental and public health concern for the emission of air pollutants from burn-up process in waste incineration plants located in the vicinity of living environment was increased during the past decade. The purpose of this study was to suggest of the simple and rapid method of priority setting model for the decision of full-scale public health assessment. This method was consists of total 5-step. Step 1 was "secure the satellite map" and we can use the satellite map which serves from the website such as NAVER Co. Step 2 was "drawing mesh on the map" for catch the point of occupation of environmental sensitivity facilities, and step 3 was "identification and sorting of the facilities", Step 4 was "setting of weight" using the "weighted linear combination (WLC) method". Finally, all facility was sorted by score. As a result, we can set a priority of 145 facilities based on 177 facilities which managed in local government. Facilities in Seoul metropolitan area was high rank in priority list. On the other side, Facilities located at the country or rural area was low rank because of low occupation of the house and the environmental sensitivity facilities such as kindergarten, elementary school, and hospital. In this study, we suggested simple and rapid method that using for screening procedure of public health assessment.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2002

The objective of this paper is to develop a new priority setting algorithm that considers the cross-impact of the future technology alternatives and that satisfies the final goal of the technology management through multi-hierarchy evaluation criteria. By combining the Analytic Hierarchy Process (AHP) model, which is a well-known priority setting model, and Cross Impact Analysis (CIA) model, which is a technological forecasting method that considers cross-impact among R&D Items, we developed an Integrated Cross-Impact Hierarchical (CIH) model, which sets the priority by considering technological forecasting and technology dependency simultaneously. A step-by-step numerical example of the model developed here is presented as backup of its practicality.