• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1252-1261
• /
• 2007

The purpose of this study was to grasp the utilization of traditional Korean Patterns used for fashion cultural products. To achieve this purpose, this study examined the range of fashion cultural products through literature review, previous researches, and market surveys and analyzed the situation of fashion cultural products and the kinds, expression methods, expression techniques, and repeat styles of utilized patterns. The analysis results are as follows. First, in the use of traditional pattern, the most frequently-used fashion cultural products were small and inexpensive accessories, followed by fashion apparel, miscellaneous goods, and living cultural goods. Second, the most frequently-used traditional patterns were plant patterns, especially flower patterns. The next frequently-used ones were mixed patterns, especially in the mixture of flower and letter patterns, and $cloisonn\'{e}$ and flower patterns. The next frequently-used traditional patterns were animal patterns(especially butterfly patterns), followed by geometric patterns, lucky omen patterns, and letter patterns. In the expression methods of used patterns, most products except handicrafts preferred simplified patterns to real patterns. Finally, in the expression techniques of traditional patterns, the most frequently used technique was traditional embroidery, followed by the use of weaving fabrics such as fine gauze and brocade which are used for Hanbok. Also, transfer dyeing which is one of printing techniques, DTP(digital textiles printing), a mixed technique which adds embroidery to weaving fabrics, hand-painting, and a gilt technique were used. The results of this study suggest that most fashion cultural products except few designers' works attached weight to some specified patterns and expression techniques regardless of the characteristics of products since there is little understanding of a variety of patterns and are few researches and development on expression techniques.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.288-295
• /
• 2019

Passive fit of prosthesis is an essential property of implant supported prosthesis for long term success and minimization of complications. And the property is determined mostly by fabrication procedure. There were limitations of extensive implant prosthesis because conventional casting method generate contraction error of long span prosthesis. However, Computer-aided design/Computer-aided manufacturing (CAD/CAM) technology of 3D printing and milling metal framework can overcome those limitations. This case is a full mouth rehabilitation using extensive implant fixed prosthesis. Removable interim prosthesis was made for esthetic, functional evaluation and a guide for implant insertion. After the insertion, implant fixed interim prosthesis was delivered. After additional evaluation and adjustment, final prosthesis was designed with CAD, the fabricated with CAM. Milling technique was used for anterior screw type implant superstructure and 3D printing technique was used for the anterior and posterior implant copings. Fit of the final restoration was favorable. The practitioner and patient were both esthetically and functionally satisfied with the final result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.105-111
• /
• 2024

The SLA (Stereolithography Apparatus) method is a type of 3D printing technique predicated on the transformation of liquid photocurable resin into a solid form through UV laser exposure, and its application is increasing in various fields. In this study, we conducted research to enhance the hydrophobicity and transparency of SLA 3D printing surfaces for microfluidic system production. The enhancement of surface hydrophobicity in SLA outputs was attainable through the application of hydrophobic coating methods, but the coating durability under different conditions varied depending on the type of hydrophobic coating. Additionally, to simultaneously achieve the required transparency and hydrophobic properties for the fabrication of microfluidic systems, we applied hydrophobic coatings to the proposed transparency enhancement method from prior research and compared the changes in contact angles. Teflon coating was proposed as a suitable hydrophobic coating method for the fabrication of microfluidic systems, given its excellent transparency and high coating durability in various environmental conditions, in comparison to titanium dioxide coating. Finally, we produced an Electrophoresis of Charged Droplet (ECD) chip, one of the digital microfluidics systems, using SLA 3D printing with the proposed Teflon coating method (Fluoropel 800). Droplet manipulation was successfully demonstrated with the fabricated chip, confirming the potential application of SLA 3D printing technology in the production of microfluidic systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1961-1965
• /
• 1991

This paper deals with an automatic and precision alignment technique for proximity printing in x-ray lithography, using two pairs of moire gratings, with moire signals from each pair being 180.deg. out of phase with each other. We constructed an automatic and precision alignment experimental system which could measure both transmitted moire signals and reflected moire signals at the same time. The automatic alignment was achieved using transmitted moire signals and also reflected moire signals as a control signal for a stage driver. The alignment position of the system was monitored not only by a control signal but also by a non-control signal. The effect of transmitted and reflected moire signals upon alignment accuracy was discussed. We concluded that the technique using diffracted moire signals is a viable automatic and precision alignment technique.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.16-22
• /
• 1983

Liquid crystal matrix display is fabricated. ITO transparent electrode and silver paste metal electrode are coated on glad substrate using silk screen printing technique, and SiO is coated on the transparent electrode by evaporation. Liquid crystal molecules are aligled by rubbing technique and displays of Alphanumeric and Hangul are tried using the dynamic scattering effect and the 3: 1 selection method.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Marbling dyeing technique shows beautiful flowing pattern because the pattern is transferred to the medium by the pigments floating onto the viscous solution base. However, this marbling pattern does not have any reproducibility and the result of accidental pattern formation. Marbling process contains many complicated procedures such as making marbling base, mordanting the medium, and bubble removal with size limitation. Computer changed the many aspects in textile design and digital technique is used in many design production. However, it is impossible to produce marbling pattern with digital drawing. In this research, the digital textile design starting from marbling pattern was developed for digital textile printing. Marbling was done to produce the initial motifs and scanned. Several marbling media such as silk, polyester, and paper were used. Photoshop was used to process and develop textile design based on these marbling motifs. One repeat was developed and various colorways were tried. The developed textile design were printed using DTP.

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.149-162
• /
• 1998

This study is thed Embroidery, Cross-stitchery, Weaving, Wax-Printing of technique and design appeared in textile of Miaos dwells in south-west among the minority people of china. The study is as follows. First, the technique of textile1) satin stitch, couching stitch, french-knot stitch, etc. using anther silk thread or cotton thread color 2) cross-stitchery 3) hand-weaving technique which is shaped other warp or weft using simple loom 4) the technique of dyeing of pattern using effect with wax. These methods are singly used mixing together, therefore doubled beauty. Second, these technuque of ornament have other independence, specially ornament apron, sling, sleeve borders, slack borderss, edge of upper garment, take off and put on easily, heighten effect of various ornament, can preserve many years. Third, Maker, female born in this country fashion by need of herself, used liberal method shown in unique creativity of life. This texture make standards capable female proud of intelligent and skill of herself. Fourth, Design appeared in textile like as pattern flying bird in the sky, strolling beast in the field, lion rolling gem, laughing dragon winding snake at gem, birks, flowers, fish, butterfly is used as the wish of long life, a lucky sign. They expressed creativity and unique conception using formation : the technique transform other shape using by omitting or adding or overestimating. Geometric pattern of tartan, revealing, Fifth, composition structure having balance and symmetry or contradiction towards center and circumstance of the center harmonized repeatedly method, expressed unique artful attraction by full composition.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1709-1714
• /
• 2007

It is demonstrated in this study that the nanoliter reactor arrays with an inkjet printing, can be used for high throughput screen of antibiotic function. As a model antibiotic, gramicidin was used in this study. The gramicidin embedded lipid vesicles were immobilized on the surface in the nanoliter reactor structure with control of the volume in the nanoliter reactor. By dispensing acidic drops into the reactor, the gramicidin function was monitored. The technique developed in this research also has a great potential to be used for discovery of drugs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.94-94
• /
• 2001