• 펄프종이기술
• /
• 제45권6호
• /
• pp.36-43
• /
• 2013

Effects of blending of PCC manufactured with emission gas occurred at mill on the characteristics of coating color, optical and printing properties of coated paper were investigated in order to evaluate the possibility of its use as a raw material for producing environmentally friendly coated paper. Low shear viscosity and water retention value of ground PCC 1(d50 = $6.303{\mu}m$) were higher than those of ground PCC 2(d50 = $3.149{\mu}m$). Ink set properties of ground PCC 1 and ground PCC 2 were inferior to that of PCC 3. Thus, the reducing of particle size was required in order to overcome the inferior ink set properties. Ground PCC 1 had a similar properties to clay, and it showed the possibility that ground PCC 1 could be used to produce matte grade coated papers. However, it was required to improve the stability(particle shape, particle size, and compatibility with chemicals used in coating color formulation) in the case of blending with GCC in order to keep the qualities of coated paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.84-84
• /
• 2010

In this study, we report on the novel lithographic patterning method to fabricate organic-semiconductor devices based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries (MIMIC) and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce the atomic layer deposition of $Al_2O_3$ film on pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated sub-micron sized pentacene FETs and measured their electrical characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.947-950
• /
• 2004

[ $ZnCr_2O_4$ ]에 $Li_2CO_3$를 $5{\sim}30wt%$ 범위에서 정량적으로 첨가한 감습재료에서 screen printing법으로 알루미나 기판 위에 후막으로 인쇄하고 $650\sim750^{\circ}C$에서 소결하여 후막 습도센서를 제작하였으며, $30\sim90%RH$ 범위에서 상대습도에 따른 저항 및 정전용량 특성을 조사하였다. $ZnCr_2O_4$에 $Li_2CO_3$가 5wt%가 첨가된 조성의 센서는 70%RH이상에서, 25wt%이상 첨가된 조성의 센서는 40%RH이하에서 저항 및 정전용량이 급격히 변화하는 switching 현상을 나타내었다. 반면, $ZnCr_2O_4$에 $Li_2CO_3$가 15wt%가 첨가된 조성의 센서는 선형적으로 저항은 감소하였고, 정전용량은 증가하였다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.73-78
• /
• 2010

This research is about the drying and curing characteristic of conductivity metallic ink on-line curing device in order to improve the curing time for productivity in RFID Gravure printing. The curing process is carried out to increase the electric conductivity after the metallic ink is printed on the substrate. The metal ink is composed of nano-sized silver or copper particles. In this research, the combined IR and Hot air curing system is used and its results is compared with those of oven, IR and Hot Air type respectively. Generally the curing time in the past is about 3 minutes. But the combined system (IR+Hot Air) in this research shows that curing time is less than 30 seconds. These results is much faster than those of other system. This study can be help to make Roll-to-Roll drying and curing process for mass and continuous production on-line.

• 한국전자거래학회지
• /
• 제23권3호
• /
• pp.173-187
• /
• 2018

2008년 사토시 나카모토(Satoshi Nakamoto)가 중앙 금융기관 없이 개인과 개인 간의 온라인 지불을 가능하게 하기 위하여 P2P(peer to peer) 네트워크를 이용한 이중지불 문제의 해결을 포함한 '비트코인(Bitcoin)'이라는 개인 간 전자화폐 시스템을 제안한 이후 블록체인은 4차 산업혁명에서 산업혁명 사이클 전주기에 영향을 미치는 범용기술로서 자리를 잡아가고 있다. 본 연구에서는 블록체인이 이러한 범용기술로서의 급격한 확산과 활용이 혁신이론 관점에서 어떠한 혁신성을 가지고 있는지를 분석하였다. 분석결과 블록체인은 '물리적 기술'의 특성뿐만 아니라 인간의 사회적 상호작용을 위한 '사회적 기술'로서의 특성을 가지고 있어 기술혁신과 사회혁신을 동시에 수반하는 혁신성을 가지고 있었다. 블록체인의 다양한 혁신성에 대한 본 연구의 접근은 블록체인의 이해를 높이고 향후 정책적 의사결정에 유용성을 제공할 것으로 기대된다.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.15-20
• /
• 2019

Most high-efficiency n-type silicon solar cells are based on the high quality surface passivation and ohmic contact between the emitter and the metal. Currently, various metalization methods such as screen printing using metal paste and physical vapor deposition are being used in forming electrodes of n-type silicon solar cell. In this paper, we analyzed the degradation factors induced by the front electrode formation process using e-beam evaporation of double passivation structure of p-type emitter and $Al_2O_3/SiN_x$ for high efficiency solar cell using n-type bulk silicon. In order to confirm the cause of the degradation, the passivation characteristics of each electrode region were determined through a quasi-steady-state photo-conductance (QSSPC).

• 한국임상약학회지
• /
• 제30권4호
• /
• pp.217-225
• /
• 2020

The fourth industrial revolution, with its characteristics of "hyper-connectivity", "hyper-intelligence" and "automation", is a hot topic worldwide. It will fundamentally change industry, economy, and business models through technological innovations, such as big data, cloud computing, Internet of Things (IoT), artificial intelligence (AI), and 3D printing. In particular, the development of highly advanced information technology (IT) and AI is expected to replace human roles, thereby changing employment and occupation prospects in the future. Based on this, some predict that the profession of the pharmacist will soon disappear. To counter this, pharmacists' attention and efforts are required to seek innovative transformations in their functions by responding sensitively and promptly to changes of the fourth industrial revolution. It is also necessary to recognize the new roles of pharmacists and to develop the competencies to perform them. The fourth industrial revolution is an inevitable change of the times. At this time, we should take comprehensive and open perspectives on how the future society will change economically, culturally, and socially, and use it as an opportunity to shape the new future of pharmacists.

• Tribology and Lubricants
• /
• 제37권1호
• /
• pp.1-6
• /
• 2021

This paper presents the experimental results of hydrophobic surfaces developed using a stereolithography-based additive-manufacturing technique. The additive manufacturing technique can be used to manufacture objects with complex geometries from computer-aided design data. Several additive manufacturing methods, such as selective laser sintering, fused deposition modeling, stereolithography apparatus (SLA), and inkjet-based system, have been developed. The SLA is a form of three-dimensional printing technology used to create prototypes, patterns, and production parts in successive layers through photochemical processes. Light causes chemical monomers and oligomers to cross-link together to form objects composed of polymers. Moreover, this method is economical for fabricating surfaces with high output resolution and quality. Here, we fabricate various surfaces using different shapes using an SLA. The surfaces with micro-patterns are fabricated for 10 cases, including the biomimetic surface. The fabricated surfaces with various micro-patterns are evaluated for hydrophobicity performance based on the static contact angle. The contact angle is measured three times for each case, and the averaged value is used. The results indicate that the arrangements in a staggered structure have a larger contact angle than those in a line when the same micro-pattern is applied. Moreover, the mimetic surfaces exhibit more hydrophobic characteristics than those of artificial micro-patterns.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.123-127
• /
• 2021

This study was on electrode design for the realization of a solar cell that combines electrode formation and module integration process to overcome printing limitations. We used the passivated emitter rear contact (PERC) solar cell. Wafer size was 156.75 mm ×156.75 mm. The fabricated cell results showed that the open-circuit voltage of 649 mV, short-circuit current density of 36.15 mA/cm², fill factor of 68.5%, and efficiency of 16.06% with electrode conditions the 24BBs with the width 190 ㎛ and 90FBs with the width 45 ㎛. For improving efficiency, the characteristics of the solar cell were checked according to the change in the number of BBs and FBs and the change in line fine width. It is confirmed that the efficiency of the solar cell will be improved by increasing the number of FBs from 90 to 120, and increasing the line width of the FBs by about 10 ㎛ compared to the manufacturing solar cells.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권3호
• /
• pp.205-211
• /
• 2022

This study aimed to provide basic data for 3D printing in the medical health field by developing upper wear fixation device (UWFD), an auxiliary device for shortening chest AP examination time on emergency room beds and non-contact with patients. The standard of hooks was modeled according to the bed frame using the Autodesk Fusion 360. It was printed with Form2 (Formlabs, Somerville, MA, USA), as SLA (stereo lithography apparatus) method, and was washed and hardened using Form Wash and Form Cure. The completed UWFD conducted an online survey on 4 items of stability, convenience, availability, preference and general characteristics. The total stability average was 3.93±0.80, the total convenience average was 3.93±0.68, the total availability average was 4.01±0.89, and the total preference average was 3.80±1.08. This study was significant in suggesting improvements in the general X-ray examination process in the emergency room by designing and making aids to easily fixing the patient's top to the frame of the emergency bed while meeting promptness and non-contact with the patient.