In this study, the possibility of use as a cartridge for 3D printing was confirmed by adding calcium to the alginic acid-added surimi mixture. The Alaska pollack Gadus chalcogrammus surimi added with alginic acid was immersed in a calcium solution (1 M calcium carbonate, 1 M calcium chloride, 1 M calcium sulfate, and 0.1 M calcium lactate) to evaluate the physical properties, color differences, and sensory properties of Alaska pollack surimi according to calcium types. As the results, in the case of surimi paste to which 1 M calcium carbonate was added, physical properties were weaker than that of 1 M calcium chloride, but gelation was appropriate and sensory properties was excellent. Addition of 1 M calcium chloride has the best physical properties, but it has a problem of bitter taste. With the addition of 1 M calcium sulfate, it has low solubility and poor physical properties as well as poor elasticity and bad taste. Addition of 0.1 M calcium lactate has weak physical properties but good sensory properties. From these results, 1 M calcium chloride has the best physical properties, but there is a decisive problem in sensory properties, so 1 M calcium carbonate is most suitable for commercial use.
목적: 다양한 3D 프린팅 의치상 레진과 여러 가지 의치 첨상 재료 간의 전단결합강도를 평가하여 기존의 열중합 의치상 레진과의 전단결합강도를 비교 평가하고자 하였다. 연구 재료 및 방법: 열중합레진(Vertex RS)과 3D프린팅 의치상 레진 두종(DENTCA Denture base II, NextDentTM Base)을 사용하였다. 의치 첨상 재료로는 성분이 다른 총 4종(Tokuyama Rebase II fast, Kooliner, Denture Liner, Denture Liner, Lang Jet Denture Repair Kit)을 사용하여 12개의 군으로 분류하였다. ISO/TS 11405규격에 따라 접착을 시행하였다. 전단결합강도를 측정하였고, 이후 입체현미경과 주사전자현미경을 이용하여 접착 계면을 관찰하고 파절편의 분석을 통하여 파절 양상을 조사하였다. 결과: 3D 프린팅 의치상 레진 군에서 의치 첨상 재료와의 전단결합강도가 열중합레진 군에 비해 유의하게 낮은 전단결합강도 결과를 나타내었다(P < 0.05). Polymethyl methacrylate계열의 첨상재료의 경우, 의치상종류와 관계없이 높은 전단결합강도를 보였다. 파절 양상은 대부분의 군에서 접착성 파절이 나타났고 일부 군에서 응집성 파절과 혼합성 파절 양상이 나타났다. 결론: Polymethyl methacrylate를 주성분으로 하는 의치 첨상 재료가 실험에 사용된 모든 의치상 레진에서 다른 의치 첨상 재료와 비교하여 높은 전단 결합강도 값을 나타내었지만, 직접법으로 의치 첨상을 시행할 경우 단량체로 Isobutyl methacrylate 성분의 의치 첨상재료를 사용하는 것이 전단결합강도면에서 유리할 것으로 사료된다.
콘크리트는 강알칼리성으로 인해 철근의 부식을 방지하는 장점이 있으나, 해중에 침지되면 해수의 평균 pH 8~9 보다 높은 pH 12~13의 강알칼리 성분을 용출하여 주변의 미생물 및 해양생물의 생태환경 및 성장에 악영향을 미치게 된다. 따라서 본 연구에서는 3D 프린터로 제작되는 인공어초용 저알칼리 모르타르 배합을 도출하기 위하여 저알칼리 모르타르의 역학적 특성 및 내구성능을 평가하였다. 강도 특성 평가결과 결합재로 실리카퓸, 플라이애시, 알파형반수석고 모두 혼입한 α-35배합에서 Plain 을 제외하고 가장 우수한 특성을 나타내었으며, 인공어초 품질기준인 27MPa를 확보할 수 있는 것으로 나타났다. pH는 알파형반수석고 혼입시 수산화칼슘 생성 억제와 황산칼슘 생성으로 인해 pH저감 효과가 우수한 것으로 나타났다. 염소이온침투저항성 실험결과, 실리카퓸 및 플라이애시 혼입시 일부 내염성이 개선되었으며, 알파형반수석고 와 혼합사용한 α-35 배합에서 3844C의 가장 우수한 염소이온침투저항성을 확인하였다. 길이변화율 측정결과, 알파형반수석고 35%대체시 OPC배합조건보다 33.5% 개선된 수축저항성을 나타내었다.
이 연구에서는 ME 방식 3D 프린터로 출력한 시멘트 복합체의 내구성을 개선하기 위해 PDMS, 규산나트륨, 표면강화재를 침지 후 도포하는 방식으로 후처리 하였으며 각각의 내구성 개선 정도를 평가하였다. 그 결과, 모든 평가에서 후처리 한 시험체의 내구성능이 그렇지 않은 시험체에 비해 내구성이 개선되는 경향을 나타냈다. 내흡수성과 염소이온 침투 저항성, 탄산화 저항성의 경우 PDMS로 후처리 했을 때 후처리 하지 않은 시험체에 비해 각각 평균 36.3 %, 77.1 %, 50.4 % 개선되어 가장 우수한 것으로 나타났으며 내동해성의 경우 규산나트륨으로 후처리 했을 때 평균 47.5 % 개선되어 가장 우수한 것으로 나타났다. 3D 프린팅용 시멘트 복합체의 후처리 용액 중 대체로 PDMS가 우수한 것으로 나타났으나 이 연구에서 제안한 바와 같이 침지 후 도포하는 후처리 방식은 3D 프린터로 출력한 시멘트 복합체 구조물에 실질적으로 적용하기 어려울 수 있으므로 시공성을 고려한 성능개선재료에 대한 후속 연구가 필요할 것으로 판단된다.
Alfouzan, Afnan Fouzan;Alotiabi, Hadeel Minife;Labban, Nawaf;Al-Otaibi, Hanan Nejer;Taweel, Sara Mohammad Al;AlShehri, Huda Ahmed
The Journal of Advanced Prosthodontics
/
제13권3호
/
pp.160-171
/
2021
Purpose. This in-vitro study evaluated and compared the color stability of 3D-printed and conventional heat-polymerized acrylic resins following aging, mechanical brushing, and immersion in staining medium. Materials and methods. Forty disc-shaped specimens (10 mm in diameter and 3 mm thick) were prepared from two 3D-printed [DentaBASE (DB) and Denture 3D+ (D3D)] and one conventional polymethylmethacrylate (PMMA) denture materials. The specimens were thermo-cycled, subjected to mechanical brushing, and were immersed in either coffee, lemon juice, coke, or artificial saliva (AS) to simulate one and two years of oral use. Color measurements of the specimens were recorded by a spectrophotometer at baseline (T0), and after one (T1) and two years (T2) of simulation. The color changes (ΔE) were determined and also quantified according to the National Bureau of Standards (NBS) units. Descriptive statistics, followed by factorial ANOVA and Bonferroni post-hoc test (α=.05), were applied for data analysis. Results. The independent factors, namely material, staining medium, and immersion time, and interaction among these factors significantly influenced ΔE (P<.009). Irrespective of the materials, treatments, and time, the highest and the lowest mean ΔEs were observed for PMMA in lemon juice (4.58 ± 1.30) and DB in AS (0.41 ± 0.18), respectively. Regarding the material type, PMMA demonstrated the highest mean ΔE (2.31 ± 1.37), followed by D3D (1.67 ± 0.66), and DB (0.85 ± 0.52), and the difference in ΔE between the materials were statistically significant (P<.001). All the specimens demonstrated a decreased color changes at T2 compared to T1, and this difference in mean ΔE was statistically significant (P<.001). Conclusion. The color changes of 3D-printed denture resins were low compared to conventional heat polymerized PMMA. All the tested materials, irrespective of the staining medium used, demonstrated a significant decrease in ΔE values over time.
International Journal of Computer Science & Network Security
/
제22권8호
/
pp.15-24
/
2022
The article clarifies the conditions for information, digital and educational accessibility for higher education seekers with disabilities in terms of distance learning caused by quarantine restrictions. It is established that such conditions are regulated by international and Ukrainian legal documents (The Standard Rules on the Equalization of Opportunities for Persons with Disabilities, Convention on the Rights of Persons with Disabilities, Sustainable Development Goals, Law of Ukraine "On Education", Law of Ukraine "On Higher Education", Strategy for the Development of Higher Education in Ukraine 2021-2031, Development Strategy areas of innovation for the period up to 2030, Development strategy of the sphere of innovation activity for the period up to 2030). As a part of information barrierlessness, Higher Education Institutions (HEI) should provide access to information in various formats and using technologies, in particular Braille script, large-type printing, audio description (audio descriptive commenting), sign language interpretation, subtitling, a format suitable for reading by screen access programs, formats of simple speech, easy-to-read formats, means of alternative communication. The experience of Pavlo Tychyna Uman State Pedagogical University is described. In particular, special attention is paid to the study of sign language: in view of this, the initiative group implemented the project "Learning to hear and overcome social isolation together" with the financial support of the British Council in Ukraine. Within the framework of digital accessibility, the official website of the Faculty of Social and Psychological Education has been adapted for the visually impaired in accordance with WCAG 2.0 World Standards. In 2021, Pavlo Tychyna Uman State Pedagogical University implemented the project "Cultural, Recreational and Tourist Cherkasy Region: Inclusive Social 3D Map" funded by the Ukrainian Cultural Foundation; a site with available content for online travel in the region to provide barrier-free access to the historical and cultural heritage of Cherkasy region was created. Educational accessibility is achieved by increasing the number of people with special educational needs, receiving education in inclusive groups; activities of the Center for Social and Educational Integration and Inclusive Rehabilitation Social Tourism "Bez barieriv" ("Without barriers"); implementation of a research topic for financing the Ministry of Education and Science of Ukraine: "Social and psychological rehabilitation of children and youth with special educational needs by means of inclusive tourism"; implementation of the project "Social inclusion of distance educational process"; development of information campaigns to popularize the ideas of accessibility, the need for its implementation, ongoing training programs and competitions, etc.
초기 지방자치센터는 민원인으로부터 민원을 접수하여 수기로 직접 해당 문건을 작성하여 민원을 발급하였으며, 컴퓨터, 프린터, 팩스가 등장한 이후에는 복사를 통해 민원 업무를 처리하였다. 2010년 이후에는 전자 정부가 출범하면서 컴퓨터에 민원 요청 내용을 입력하고 본인 확인 후에 직접 출력하는 방식이 자리를 잡게 되었다. 또한, 무인 행정 서비스가 도입되어 다양한 장소에서 민원 서비스를 제공하면서 민원인의 만족도가 점차 높아지고 있다. 그중 하나의 서비스가 무인민원발급기이며 주민등록등본을 포함한 20여 가지의 민원 서류들을 민원인이 직접 발급받을 수 있도록 하고 있다. 물론, 직접 민원 창구에서 요구하던 방식을 벗어나 직접 기기를 다루다 보니 최신 기술에 익숙하지 않았을 때 도움이 추가로 필요한 경우가 생기기도 한다. 그렇지만, 무인민원발급기는 업무 종료 후에도 주민자치센터나 시청을 방문하여 민원 처리를 할 수 있다는 점에서 시간의 제약을 덜 받는, 만족도가 높은 방안이다. 현재 주요한 문제는 발급 종류에 따라 주민등록번호뿐만 아니라 지문 인식도 요구하는 경우가 있어, 민원 처리의 불편이 가중되고 외면받는 것이다. 이러한 문제를 해결하고자, 본 연구는 개인 신분 확대를 통해 무인민원발급기의 지문 인식 방법을 개선하는 방법을 연구하고자 한다.
본 연구는 디지털 패션디자인 영역이 확장되고 있는 현시점에서 자수 특유의 시각적 표현효과를 보다 쉽고 다양하게 의복 디자인에 접목할 수 있는 기초자료를 제공하고자 자수 디자인의 디지털화에 의한 시각적 표현 효과가 실제 의상과 가상의상에서도 동일한 효과를 나타내는지 비교하였다. 컴퓨터 자수기를 이용한 실제 자수 모티브와 디지털화에 의한 DTP 자수 모티브, 디지털 모티브를 생성하였으며 의복에서의 시각적 표현효과를 비교하고자 각각의 자수 모티브가 들어간 패치포켓 형태의 T-셔츠를 제작하였다. 자수기로 제작한 자수가 삽입된 의복과 디지털화된 자수 모티브를 디지털텍스타일프린팅하여 제작된 의복의 시각적 효과를 비교한 결과, 색상(3.5), 질감(4.0), 광택(3.8), 두께(3.5)에서 자수원사의 컬러와 두께감 등 시각적으로 충분히 자수의 질감, 광택의 표현 효과를 나타낼 수 있음을 알 수 있었다. 가상의복의 자수 표현효과에 있어서도, 색상(3.8), 질감(4.3), 광택(3.9), 두께(3.6)의 높은 일치도를 보여, 우리는 디지털화된 자수모티브도 기존 자수 특유의 시각적 표현 효과를 충분히 구현할 수 있는 도구임을 확인할 수 있었다.
${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$(1445) is a book compiled the medical achievements of China and Choseon in those times and it's our source of pride to have it In this country. It also deserves careful investigation since this book can provide some clues of features of missing books in China and Korea. The extent of accuracy of xylographica of old books determines the possiblity of in depth further study. So authors attempted to investigate the xylographica of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ one of the 3 main books in Korea. Previous investigation done by Miki Sakae and Kim Doo Jong are noticeable. On the basis of their respective works, we analyzed 'Annals of the Choseon Dynasty' to find records related with ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ and estimated the situation of its publication. We tried figure the situation of those times of China, Japan and Korea(including North Korea) and tried to estimate the book's original xylographica as much as we could. By King Sejong's command, the first draft of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ consisted of 365 books was made by collaboration of civil officials and medical officers during the period from 1443 to 1445. And then from 1451(first year of Moonjong's reign) to 1464(l0th year of Sejo's reign) lots of manpowers were employed and through the process of countless erasure, proofreading, arrangement and rearrangement revised version of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ which is called by Sejo text was completed. After 3 years of wood engraving work, the first printed form of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ (alternately called Seongjong text) in folding case consisted of 266 chapters, 264 volumes came into the world in 1477.(8th year of Seongjong's reign). This was 32 years after the initial completion of the edition. So ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ exists in three forms as Sejong text, Sejo text and Seongjong text respectively. Since those texts were plundered during the Japanese invasion of Korea in 1592, none of the original copy remains within korea. The texts were constantly moved to kadeungcheongieong, to Kongdeungpyeongio, Jesookoan of Edo, to East University of department of classic books, to Cheoncho archives, to the Imperial Museum and finally is kept in the royal palace at present. (Doseoryo text Eulhae printing type) Reduced-size republication books of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ in wooden type were imported at the time of 'Byeongja Korea-Japan Treaty in 1876' and of those 2 books, one copy was treasured in the Royal Household of the Yi Dynasty and than was lost during the Korean War circa 1950. The other remaining copy has been kept succesively by Kojong's imperial grant, Royal doctor Hong Cheol Bo, Hong Taek Joo, Hong Ik Pyo the book agent, and now is kept In Yonsei University Library and this is the only existing copy in Korea at present. In 1965, Dongyang Medical college published the transcription version of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ consisting of 11 books and then in 1981 after edition and arrangement by Choonghoa(中華) publishing company, photoprint copy of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ was published in Keumgang(金剛) publishing company In 1991, October Yeokang(驛江) publishing company producd photocopies of ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ which were previously translated into Korean by North Korea Institute of Oriental Medicine and then issued by medical publishing company. In China, two institutes, Zhejiang Institute of Traditional Chinese Medicine and Huzhou Traditional Chinese Medical Hospital cooperated to publish a revised and marked text consiting of 11 books by adding marking points to japanse Edohakhoondang text which were used as a reference. Both the korean and chinese texts issued were grounded by the ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ kept in the royal palace. Any further study concerning ${\ulcorner}$Classified Collection of Medical Prescriptions${\lrcorner}$ can acquire its accuracy and objectivity when the japanese text kept in the royal palace is taken as an original copy.
고상 반응법을 이용하여 L $a_{0.6}$S $r_{0.4}$$Co_{0.2}$F $e_{0.8}$$O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$$O_{3-}$$\delta$/ 분말을 합성하고 혼합전도체 분리막을 소결하여 제조하였다. 제조된 분리막들은 정확한 페롭스카이트 결정구조를 나타내었으며, 95% 이상의 높은 상대밀도를 나타내었다. 산소이온 변환 능력을 향상시키기 위해 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$$O_{3-}$$\delta$/ disk의 양 표면에 L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ paste를 스크린 프린팅 방법으로 코팅하였으며 코팅 막은 비교적 치밀한 미세구조를 나타내었다. 코팅되지 않은 L $a_{0.6}$S $r_{0.4}$$Co_{0.2}$F $e_{0.8}$$O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$$O_{3-}$$\delta$/ 분리막과 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$$O_{3-}$$\delta$/ 분리막의 산소투과 성능을 비교 실험한 결과, 90$0^{\circ}C$에서 L $a_{0.6}$S $r_{0.4}$$Co_{0.2}$F $e_{0.8}$$O_{3-}$$\delta$/ 분리막이 정상상태에서 0.266 mL/min.$\textrm{cm}^2$로 가장 많은 투과량을 보였으며 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$$O_{3-}$$\delta$/ 분리막의 정상상태 산소 투과 유속은 최고 0.19 mL/min.$\textrm{cm}^2$ 정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다. 높게 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.