• 제목/요약/키워드: Printing Technique

검색결과 369건 처리시간 0.032초

DICOM 영상에 의한 STL 파일 구조가 보청기 이어 쉘 제작에 미치는 영향 (Effect of the STereoLithography File Structure on the Ear Shell Production for Hearing Aids According to DICOM Images)

  • 김형균
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권1호
    • /
    • pp.121-126
    • /
    • 2017
  • 의료용 디지털 영상 및 통신 표준 영상과 3차원 프린팅을 이용한 보청기 이어 쉘 제작기술을 연구하였다. 이는 기존에 없는 새로운 적용방법이며 보청기 수요자의 안전, 감염, 제작시간, 진행 단계를 줄일 수 있는 적용기술이다. 연구는 의료용 디지털 영상 및 통신 표준 영상으로 스테레오리소그래피 파일을 만들기 위한 0.5 mm, 1.0 mm, 2.0 mm의 볼륨으로 획득한 값을 3차원 프린터로 출력 전과 후의 과정에서 형상표면에 미치는 영향을 실험하였다. 출력 전에는 스테레오리소그래피 파일구조에 대해 상대적 관계를 비교하였고, 출력 후에는 이어 쉘 형상표면의 적층구조 간격을 현미경으로 확대하여 비교하였다. 스테레오리소그래피 파일구조 분석에서 0.5 mm, 1.0 mm, 2.0 mm의 순으로 삼각형 꼭지점, 5개 이상의 교차점, 최대 교차점의 개수가 많았으며 외이도 형상 자체의 굴곡도에 따라 Bending, Angle, Crest 영역 순으로 삼각형 구조가 조밀하게 분포하였다. 디지털 현미경에 의한 이어 쉘 형상표면은 2.0 mm, 1.0 mm, 0.5 mm 순으로 적층구조 간격이 두껍게 나타났다. 이와 같이 스테레오리소그래피 표면구조는 3차원 이어 쉘 형상의 굴곡도가 불규칙하고 스테레오리소그래피 파일을 만들기 위한 의료용 디지털 영상 및 통신 표준 데이터의 볼륨 값이 작을수록 교차하는 스테레오리소그래피 삼각형 구조는 조밀함을 알 수 있었다.

디지털 기술을 활용한 전악 고정성 보철 수복 증례 (Application of various digital technique on full mouth rehabilitation: A case report)

  • 배민수;송광엽;안승근;박주미;이정진;서재민
    • 대한치과보철학회지
    • /
    • 제59권1호
    • /
    • pp.43-54
    • /
    • 2021
  • 디지털기술의 급격한 발전으로 보철 수복치료에 있어서도 많은 기술들이 활용되고 있다. 특히 최근에는 구강스캐너와 3D printing 기술이 광범위하게 사용되고, 더 나아가 안면스캔 기술 또한 접목되어 활용되고 있다. 본 증례는 37세 여성환자에서 전통적인 방식으로 제작되고 장착되어 충분히 평가된 전악 고정성 임시수복상태를 구강스캐너와 안면스캐너, 3D printing 등의 다양한 디지털 기술을 활용하여 안모와 조화를 이루는 최종보철물로 이행하는 과정을 거쳤다. 이를 통해 안정적인 교합을 회복하고 기능적, 심미적으로 만족할만한 결과를 얻었기에 보고하는 바이다.

3D 콘크리트 프린팅된 모르타르 프리즘 시편의 강도 분석 (Strength Analysis of 3D Concrete Printed Mortar Prism Samples)

  • 김성조;방건웅;한동석
    • 한국전산구조공학회논문집
    • /
    • 제35권4호
    • /
    • pp.227-233
    • /
    • 2022
  • 3D 프린팅은 다수의 레이어(layer)를 적층하여 물체를 제작하는 기법으로, 복잡한 형상을 가지는 물체를 비교적 쉽게 제작할 수 있다. 이를 건설 산업에 접목한 3D 콘크리트 프린팅(3D concrete printing)은 콘크리트 타설 시 거푸집을 사용하지 않으며, 비교적 적은 작업량과 인력이 요구되므로 경제적인 시공이 가능하나, 출력된 3D 프린팅 콘크리트는 일반 콘크리트 대비 다소 낮은 강도가 예상된다. 따라서, 본 연구에서는 3D 프린팅 콘크리트 시편의 물성을 분석하였다. 3D 프린팅 콘크리트 시편 출력을 위해 Ultimaker Cura 소프트웨어로 형상 및 출력 경로를 설계하고, 이를 바탕으로 3D 프린터를 제어하는 G-code를 생성하였다. 연구에서 사용된 3D 프린터의 출력 성능과 콘크리트의 적층성, 유동성 등을 고려하여 최적의 배합비를 선정하였고, 시편 출력에 활용하였다. 시편 출력 시 동일한 치수를 가지는 몰드 시편을 함께 제작하여 비교·분석에 사용하였다. 각 시편의 물성은 휨강도 시험과 압축강도 시험을 통해 각각의 강도를 측정하였고, 비교·분석하여 3D 프린팅 콘크리트 시편의 물성을 확인하였다.

롤투롤 인쇄공정 적용을 위한 차세대 나노입자 소결 기술 (Alternative Sintering Technology of Printed Nanoparticles for Roll-to-Roll Process)

  • 이은경;은경태;안영석;김용택;천민우;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제21권4호
    • /
    • pp.15-24
    • /
    • 2014
  • Recently, a variety of printing technologies, including ink jet, gravure, and roll-to-roll (R2R) printing, has generated intensive interest in the application of flexible and wearable electronic devices. However, the actual use of printing technique is much limited because the sintering process of the printed nanoparticle inks remains as a huge practical drawback. In the fabrication of the conductive metal film, a post-sintering process is required to achieve high conductivity of the printed film. The conventional thermal sintering takes considerable sintering times, and requires high temperatures. For application to flexible devices, the sintering temperature should be as low as possible to minimize the damage of polymer substrate. Several alternative sintering methods were suggested, such as laser, halogen lamp, infrared, plasma, ohmic, microwave, and etc. Eventually, the new sintering technique should be applicable to large area, R2R, and polymer substrate as well as low cost. This article reviews progress in recent technologies for several sintering methods. The advantages and disadvantages of each technology will be reviewed. Several issues for the application in R2R process are discussed.

감물염색을 활용한 전통 문화상품의 개발 (Development of Traditional Cultural Products Using Persimmon Dyeing)

  • 이은진;김선경;조효숙
    • 복식문화연구
    • /
    • 제15권6호
    • /
    • pp.1053-1062
    • /
    • 2007
  • This study purposed to restructure representative traditional patterns formatively, manufacture actual cultural products with traditional dyeing technique using persimmon, and commercialize the results of the research. Traditionally in Korea, the dying of natural fiber such as cotton, flax and silk with persimmon was called Galmul dyeing, and clothes made through Galmul dyeing were called Galot. Galot was very useful because it is strong, does not pick up dirt easily, dries easily, and is cool in summer. In addition, cloth dyed with persimmon becomes stiff, so it does not need to be starched or ironed after washing. Moreover, it does not transmit heat under direct rays and is highly air-permeable, so it is cool and useful for standing the heat. In this study, we used traditional persimmon dyeing technique, printing traditional patterns fit for contemporary people's aesthetic sense not through dip-dying but through printing. When persimmon dyeing is used in expressing patterns, it produces not only visual effect but also embossing effect due to the characteristic of persimmon that makes printed patterns stiff, so we can obtain unique texture distinguished from other printing methods. We chose seven motive patterns, which were lotus pattern symbolizing eternal life, peony pattern symbolizing wealth and rank and prosperity, character Su(壽) pattern widely used as a symbol of health, bird and cloud pattern in the Goryeo Dynasty, Sahapyeoeuisohwa(四合如意小花) pattern printed on brocade in the Goryeo Dynasty, lattice pattern, cloth pattern on wall paintings from the Period of the Three Kingdoms. From each pattern chosen as a motive was extracted unit patterns and the original pattern was restored using Adobe Illustrator. Restored patterns were restructured to be applied to cultural products fit for contemporary formative sense. Fabrics used in dyeing were cotton, linen, ramie, silk, and polyester. Although the same persimmon dyeing was applied, we produced different feelings of patterns using various fabrics and in some cases gold and silver powder was added for the effect of gloss in addition to the embossing of patterns. Using printed fabrics we manufactured tea pads, place mats, cushions, wrapping cloth for gifts, wallet, lampshades.

  • PDF

지하광산갱도의 물리모형 구현을 위한 3D프린팅 기술 적용사례 (Introduction of 3D Printing Technique applied for producing Physical Models of Underground Mine Openings)

  • 윤동호;;송재준
    • 터널과지하공간
    • /
    • 제27권2호
    • /
    • pp.69-76
    • /
    • 2017
  • 지하광산 물리모형은 그 시각적인 효과로 인해 광산 개발 및 컨설팅 과정에서 광산공동 설계 또는 공정관리 등의 효율성을 제고하는 데 매우 유용하다. 다양한 기업에서 갱내를 3차원 영상으로 구현하는 기술이 개발된 바 있지만, 현재까지도 갱도 전체를 가시적으로 파악하기 쉬운 물리모형이 널리 이용되고 있다. 기존의 물리모형 제작 방법은 종이나 아크릴 등의 재료를 이용하여 수작업으로 모형을 제작하므로 정밀도가 떨어지고 소요시간 및 비용이 매우 큰 단점이 있다. 따라서, 이 연구에서는 최근 각 분야에서 널리 활용되고 있는 3D프린팅 기술을 적용하여 지하광산 갱도의 물리모형을 저비용으로 정밀하고 신속하게 제작하는 기법을 개발하였으며, 최종적으로, 소프트웨어 "UMine2STL"을 개발하고 광산 갱도 일부를 출력하여 그 활용성을 검증하였다.

3D Printed Titanium Implant for the Skull Reconstruction: A Preliminary Case Study

  • Choi, Jong-Woo;Ahn, Jae-Sung
    • Journal of International Society for Simulation Surgery
    • /
    • 제1권2호
    • /
    • pp.99-102
    • /
    • 2014
  • The skull defect can be made after the trauma, oncologic problems or neurosurgery. The skull reconstruction has been the challenging issue in craniofacial fields for a long time. So far the skull reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for skull reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile various types of allogenic and alloplastic materials have been also used. However, skull reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original skull anatomy as possible using the 3D printed titanium implant, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we fabricated Titanium implant to reconstruct three-dimensional orbital structure in advance, using the 3D printer. This prefabricated Titanium-implant was then inserted onto the defected skull and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be very successful in this patient. Individualized approach for each patient could be an ideal way to manage the traumatic patients in near future.

3D 프린팅을 통해 기존의치를 복제하여 개인트레이로 활용한 총의치 제작 증례 (Fabrication of denture by using the individual tray duplicated an existing denture through 3D printing: A case report)

  • 박주영;박상원;임현필;박찬;윤귀덕
    • 대한치과보철학회지
    • /
    • 제59권4호
    • /
    • pp.508-514
    • /
    • 2021
  • 본 증례는 기존 의치를 스캔 후 프린팅한 복제 의치를 폐구인상시 개인트레이로 사용하였고 이에 기공 과정을 줄이고, 진료시간을 단축시킬 수 있었으며, 안모 평가가 용이하고 치아 배열을 비롯한 총의치 제작과정에 있어 기공 과정이 원활하게 이뤄질 수 있었다. 또한 일반적인 개구인상법을 이용한 제작과정에 비해 내원 횟수를 줄일 수 있었으며 기존 의치의 수직고경을 비롯한 여러 정보를 의치 제작 시 활용함으로써 환자의 새 의치 적응도를 높일 수 있었다.

DTP 기법을 활용한 니트 원피스 디자인 (A Study on Knitted One-piece Design by DTP)

  • 오윤정;조규화
    • 복식
    • /
    • 제59권6호
    • /
    • pp.106-117
    • /
    • 2009
  • The purpose of this study is to present a new vision for high value-added knit wear design by designing and producing knitted one-piece dress by digital textile printing which based on digital making a new industry, culture, and lifestyle in a new millenium. According as casual fashion is more and more popular, preferring knit wear, a key item of casual fashion, continues to increases. Therefore it is important to study knit wear design practically, try a new technique, and represent creative designs. As a method of the study, visual and textural data were investigated for theory of knit and DTP and a variety of knit design samples were illustrated Especially, to perform a study based on the industry, this researcher worked and experienced at J fashion Ltd., knit wear promotion company. Firstly, the theory of DTP was investigated and then 3 knitted one-pieces were designed and produced. The concept of design was digital geometry which represented chic and modern image in digital age. Target was city adult group from the late teens to the late twenties and keeping open mind and active lifestyle and enjoying the activity and unique characteristics of knit wear. This study has developed knitted one-piece design by DTP technique which has been generally applied to woven fabric. This is of great significant in opening a new way of high value-added knit wear design.

Novel Development of Electrowetting Display

  • Cheng, W.Y.;Chang, Y.P.;Lo, K.L.;Lee, D.W.;Lee, H.H.;Kuo, S.W.;Hsiao, C.C.;Chen, K.T.;Tsai, Y.H.;Chen, Y.C.;Fuh, S.Y.;Wang, C.W.;Su, P.J.;Chiu, W.W.;Lee, K.C.;Shiu, J.W.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1240-1243
    • /
    • 2008
  • The 6- inch electrowetting display (EWD) can be successfully developed by ink jet printing (IJP) technique. Due to the drop-on-demand characteristic of IJP technology, colored oil can be precisely dosed into the unit pixel. Here, we present the active matrix EWD in this article. By adopting this technique to dose different colored oils, single layer Multi-color EWD without adopting color filter can be achieved in the future.

  • PDF