• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.223-226
• /
• 2000

In this paper, we report detects system algorithm, adapted a perimetric mask and a generalized symmetry system, to detect a transformable material and find out a minute error cannot be noticed by a naked eye. In this thesis, supposed a stable detecting system applied a general image processing theory and perimetric mash algorithm to detect badness. And finally, detected some vague errors with the application of symmetry transform algorithm that accumulate a symmetry of minute error and put stress on it.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.261-266
• /
• 1994

The objective of this study is to develop the expert system for R/C box culvert design. This program provided various functions to improve automatic design. The program is composed of five steps. The characteristics of each step are as follows; 1) Preprocessing Step, 2) Analysis Step, 3) View of Memberforce Step, 4) Postprocessing Step, 5) Printing of Design-Sheet Step. Finally, Expert System and Knowledge Database System is developed for the drawing of optimal R/C box-culvert design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.51-57
• /
• 2021

The seawater cooling system of naval ships is installed to remove the toxic substances generated by CBR (Chemical, Biological, and Radiological) warfare and reduce the infrared signature of naval ships from outside the hull. The dispersion range of the nozzle is determined according to the injection pressure of seawater and the nozzle type. Therefore, it is necessary to select the appropriate injection pressure and design the optimal nozzles to increase the seawater dispersion area and maximize the efficiency of the cooling system. In this study, the applying feasibility of 3D printing technology to produce an injection nozzle for the seawater cooling system was examined. To this end, the extruded plastic specimens were fabricated by 3D printing, and the physical properties of the specimens were estimated through tensile testing. After this, the strain and stress of the nozzle as a function of the pressure were simulated by applying the estimated results to the finite element analysis. The finite element analysis results showed that the nozzle remained within the elastic range at the optimal pressure. The nozzle was estimated to be structurally stable, and the possibility of this study was confirmed.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.115-128
• /
• 2004

The proliferation of Information Technology and Business Automation become the mainstay of the growth of world printer market. Especially the demand for high speed printers increases drastically as the need for printing service station in networked computing environment grows. However outstanding research activities are seldom reported. Only efforts are currently focused on the printing quality and development of application programs for low or midium speed printers. This stimulates the research for high-speed printers. In this paper, we first defined the architectural components of high-speed printers so that the performance requirements can be satisfied. The individual impacts of each module on overall throughput are then elaborately analysed. Based on this result, we accomplished well-tuned system architecture which presents up to 163.52 PPM. Another contribution of this paper can be found in that this is one of the first articles that deal with the architecture and the performance of high-speed printers.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.370-377
• /
• 2014

At present trend 3D Printing technology has been using more efficiently than conventional subtractive manufacturing method in various medical fields, in particular this technology superior in saving production time, cost and process than conventional. Especially in orthopedics, an attractive attention has been paid by adopting this technology because of improving operation, operation accuracy, and reducing the patient's pain. Though 3D printing technology has enormous applications still in some hospitals have not been using due to having the problem of technical utilization of hardware, software & chiefly financial availability and etc. In order to solve these problems by reducing the cost and time, we have used CT images in pre-operative planning by directly making the pelvic fracture model with open source DICOM viewer and STL file conversion program, assembly 3D printer of FDM wire additive manufacturing. After having the customized bone model of six patients who underwent unstable pelvic fracture surgery, we have operated our system in orthopedic section of University Hospital through the clinician. Later, we have received better reviews and comments on utilization availability, results, and precision and now our system considered to be useful in surgical planning.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.99-104
• /
• 2017

Due to the depletion of fossil oil and the increasing oil price, bio-plastic is currently topical. Bio-based plastics are synthesized from plant resources, unlike conventional petroleum-based counterparts. Therefore, the former minimizes global warming and reduces carbon dioxide emission. Fossil polycarbonate (PC)has good mechanical and optical properties, but its synthesis requires bisphenol-A and phosgene gas, which are toxic to humans. To address these problems, the fused deposition 3D printing process (hereafter, FDM) is studied using environmentally-friendly and high-strength bio-based PC. A comparisonof the environmental impact and tensile strength of fossil PC versus bio-based PC is presented herein, demonstrating that bio-based PC is more environmentally-friendly with higher tensile strength than fossil PC. The advantages of bio-based PC are applied in the FDM process for the fabrication of environmentally-friendly baby toys.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.187-192
• /
• 2017

This paper presents an ongoing study to develop a novel pressure sensor by means of a Nano Carbon Piezoresistive Composite (NCPC). The sensor was fabricated using the 3D printing process. We designed a miniaturized cantilever-type sensor electrode to improve the pressure sensing performance and utilized a 3D printer to build a small-sized body. The sensor electrode was made of 2 wt％ MWCNT/epoxy piezoresistive nano-composite, and the sensor body was encapsulated with a pipe plug cap for easy installation to any pressure system. The piezoresistivity responses of the sensor were converted into stable voltage outputs by using a signal processing system, which is similar to a conventional foil strain gauge. We evaluated the pressure-sensing performances using a pressure calibrator in the lab environment. The 3D-printed cantilever electrode pressure sensor showed linear voltage outputs of up to 16,500 KPa, which is a 200％ improvement in the pressure sensing range when compared with the bulk-type electrode used in our previous work.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.75-88
• /
• 1996

Digital image capturing technology has been making great progress recently, and we can now simply capture the color image by digital camera, flat-bed scanner of Photo CD system. A lot of professionals are instrested in the capability of Photo CD and other digital images in the printing and publishing industry. But these images were not processed a suitable image processing to use in the hard copy. In this paper we described a method of the digital enhancement processiing to use in the printing and publishing industry. Experimental result show that the described method was useful and valid for the digital image enhancement to use in the hard copy.

• 연구논문집
• /
• s.23
• /
• pp.155-164
• /
• 1993

A drawing technique which use only fine curves and dashed lines is widely adopted in banknotes and post stamps printing. Engraving of the curves and lines are traditionally performed by hand skill which provides low productivity in printing. As an effort for higher productivity and quality, a drawing automation method which can easily produce NC codes and drawings for a mechanical or chemical engraving is proposed. An initial work shows that it is possible to draw a portrait by contolling the width and length of predetermined fine lines according to the gray scale at the end points of each line. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.1
• /
• pp.19-31
• /
• 1999

One of the non-photorealistic rendering method, a drawing technique which uses only fine curves and dashed line, is widely employed in an knots and post stamps printing. Engraving of the curves and lines are traditionally performed by human engravers which leads to low productivity in printing preparation. As an effort to improve productivity and quality, a drawing automation method which can easily produce a portrait composed of vector data for laser or chemical engraving is proposed. The method shows that it is possible to draw a portrait by controling the width and length of predefined fine lines according to the gray scales a the end points of each fine lines. A gradually controled weighting factor method is proposed in addition to the author previous works to prevent undesirable boundaries in an identical texture region. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.