• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2017

The recent 3D printing industry has been focusing on developing 3D printers to fulfill the user's need to bring more colorful and realistic outcomes. Several 3D printers have deployed multiple extruders to print different colors. However, this method has a limit on its availability of colors. To solve this, recent research is focused on using mixing chambers to mix the possible colors to provide more color availability. In this paper, we discuss the environment and algorithm behind the development of G-code which allows a gradation effect of the mix of two filaments. The generation algorithm to make gradient G-code has been implemented in Cura using C ++ and Python.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.68-73
• /
• 2022

In this study, we produced the surface defect detection model to automatically detect defect bone plates using a deep learning algorithm. Bone plates with a width and a length of 50 mm are most used for fracture treatment. Normal bone plates and defective bone plates were printed on the 3d printer. Normal bone plates and defective bone plates were photographed with 1,080 pixels using the webcam. The total quantity of collected images was 500. 300 images were used to learn the defect detection model. 200 images were used to test the defect detection model. The mAP(Mean Average Precision) method was used to evaluate the performance of the surface defect detection model. As the result of confirming the performance of the surface defect detection model, the detection accuracy was 96.3 %.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2312-2322
• /
• 2021

In recent studies, the creep rate of Zircaloy-4, one of the basic property parameters of the nuclear fuel code, has been commonly used with the axial creep model proposed by Rosinger et al. However, in order to calculate the circumferential deformation of the fuel cladding, there is a limitation that a difference occurs depending on the anisotropic coefficients used in deriving the circumferential creep equation by using the axial creep equation. Therefore, in this study, the existing axial creep law and the derived circumferential creep results were analyzed through a circumferential creep test by the internal pressurization method in the isothermal conditions. The circumferential creep deformation was measured through the optical image analysis method, and the results of the experiment were investigated through constructed IDECA (In-situ DEformation Calculation Algorithm based on creep) code. First, preliminary tests were performed in the isotropic β-phase. Subsequently in the anisotropic α-phase, the correlations obtained from a series of circumferential creep tests were compared with the axial creep equation, and optimized anisotropic coefficients were proposed based on the performed circumferential creep results. Finally, the IDECA prediction results using optimized anisotropic coefficients based on creep tests were validated through tube burst tests in transient conditions.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.123-130
• /
• 2018

Triangulation is one of the fundamental problems in computational geometry and computer graphics community, and it has huge application areas such as 3D printing, computer-aided engineering, surface reconstruction, surface visualization, and so on. The Delaunay refinement algorithm is a well-known method to generate quality triangular meshes when point cloud and/or constrained edges are given in two- or three-dimensional space. In this paper, we propose a simple but efficient algorithm to triangulate Voronoi surfaces of Voronoi diagram of spheres in 3-dimensional Euclidean space. The proposed algorithm is based on the Ruppert's Delaunay refinement algorithm, and we modified the algorithm to be applied to the triangulation of Voronoi surfaces in two ways. First, a new method to deciding the location of a newly added vertex on the surface in 3-dimensional space is proposed. Second, a new efficient but effective way of estimating approximation error between Voronoi surface and triangulation. Because the proposed algorithm generates a triangular mesh for Voronoi surfaces with guaranteed quality, users can control the level of quality of the resulting triangulation that their application problems require. We have implemented and tested the proposed algorithm for random non-intersecting spheres, and the experimental result shows the proposed algorithm produces quality triangulations on Voronoi surfaces satisfying the quality criterion.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.338-341
• /
• 1997

The current consumption and the heat produced in the printhead of thermal printer are mainly governed by total printing dots and printing time for each line. Simple algorithm is proposed to optimize the performance of a thermal printhead, which use variable division according to bit-mapped data of its 1 line. And, for protecting the thermal printhead from exceeding heat, I control the heat energy of each microheater(dots) on the thermal printhead through changes in the applied pulse width.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.443-450
• /
• 2016

This paper deals with a kind of packing problem of which the goal is to compose one or more templates which will be used to produce the items of different types. Each template consists of a fixed number of slots which are assigned to the different types of items and the production of the items is accomplished by printing the template repeatedly. The objective is to minimize the total number of produced items. This problem is known to be NP-hard. We present a polynomial time approximation algorithm which has a constant approximation ratio. The proposed algorithm is based on the well-known first-fit strategy.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.984-990
• /
• 2009

Halftoning is very important image processing techniques in the digital printing industry which is a process of converting a continuous-tone image to bi-level tone image. In this paper we introduce a new digital halftoning method based on maze generation algorithm as a replacement algorithm of halftoning with space-filling curve. Previous error-diffusion methods based on space-filling curve suffer from regular pattern artifacts from uniform scan pattern. We use maze generation algorithm to remove this undesirable pattern of space-filling curve method.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.552-559
• /
• 2011

In this paper, a new image watermarking algorithm is proposed which can hide specific information of an ID card's owner in photo image for preventing ID's photo forgery. Proposed algorithm uses the image segmentation and the correlation peak position modulation of spread spectrum. The watermark embedded in photo ensures not only robustness against printing and scanning but also sufficient information capacity hiding unique number such as social security numbers in small-sized photo. Another advantage of proposed method is extracting accurate information with error tolerance within some rotation range by using $2^h{\times}2^w$ unit sample space not instead $1{\times}1$ pixels for insertion and extraction of information. 40 bits information can be embedded and extracted at $256{\times}256$ sized ID photo with BER value of 0 % when the test condition is 300dpi scanner and photo printer with 22 photos. In conclusion, proposed algorithm shows the robustness for noise and rotational errors occured during printing and scanning.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.53-58
• /
• 2009

A real-time inspection system has been developed by combining CCD based image processing algorithm and a standard lighting equipment. The system was tested for defective fabrics showing nozzle contact scratch marks, which were one of the frequently occurring defects. Multi-resolution analysis(MRA) algorithm were used and evaluated according to both their processing time and detection rate. Standard value for defective inspection was the mean of the non-defect image feature. Similarity was decided via comparing standard value with sample image feature value. Totally, we achieved defective inspection accuracy above 95%.