• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.225-230
• /
• 2020

The development of the industrial revolution can confirm the paradigm of manufacturing is changing from the mass production of small varieties to the form of small-scale production of many varieties. That is a form that can reduce the burden of indiscriminate raising of producers and a change in the industrial form that seeks to make up for the problems of the productivity portion that should change as modern society develops. Looking at the 3D printing environment, there are many problems in reaching the final stage of printing. The problem is not just the low-cost, low-end 3D Pirnter, but the high-priced 3D Printers released as finished products also show the same symptoms. This can cause anxiety factors in the printing process. Therefore, the research was conducted to compensate such problems. Based on the research, we propose the design of IoT beacon-based 3D Printer remote safety and quality control system targeting 3D Printer individual users.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.2
• /
• pp.97-119
• /
• 2019

Libraries both in South Korea and abroad have been adopting 3D printers and related service. This indicates the need for documented 3D printer use policy to facilitate the service. This study investigates 3D printer use policies of libraries in Korea and best practices of the United States, and suggests contents for 3D printer use policies in Korea. The finding shows that Korean libraries with 3D printers did not have systematic and documented 3D printer use policies. After conducting content analysis of 16 best practices of 3D printer use policies from libraries in the United States, the authors identified five themes (purpose, users, procedures, limitations of use, and liability) and 21 sub-themes. The findings are informative for Korean libraries to develop 3D printer use policies and to understand various considerations in implementing 3D printer services.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.427-436
• /
• 2010

The printer sound has many aspects which define its quality because the printer has lots of components and its operation is very complicated. These sound qualities are related to the international competition in printer markets. Recordings inside anechoic chamber were analyzed and a large number of sounds were stimulated using digital signal processing technique. First subjective tests of the printer sound were conducted using semantic different method. By applying factor analysis to the subjective response, two important factors of sound quality were extracted. Second subjective tests were conducted to evaluate the quietness and the impulsiveness of the printer sounds. On the other hand, sound metrics are calculated applying psychoacoustic theories. In this paper, the nonlinear relation between subjective evaluation and sound metrics was identified using artificial neural network and the printer sound quality index was developed. Later, subjective sound quality evaluation will be estimated and evaluated using this index.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.280-283
• /
• 2000

Users of computer interfaced with the LAN use the same printer with time sharing. Alternatively, Hey use the multi-user printer interface to print in the office which can't have LAN system due to the great expenses. Otherwise they have to connect directly moving the printer to computer. In this papaer, we present a new printer interface equipment which can interface a printer and multi computers through wireless using the radio frequency of about 430MHz. The tranceivers of the equipment consist of two part: one part is installed in parallel port of computer and other part is installed in Centronix port of printer. Their maximum data rate is 9600bps and the communication area is about 50 meters in best case.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.177-182
• /
• 2015

Nevertheless 3D printer is propagated fast, it is difficult for us of using 3D printer at the same time because of 3D printer's slow velocity. Existing solution is to print using SD card which moves files and on PC but this method is spend too much time and can not be showed status of printing. Yet we have no 3D printer software solution which is controlled and printed remotely. Therefore, this 3D printer software solution makes 3D printer be connected on internet networks and selected to use it on smart App. And it is controlled and printed remotely. In my paper, to build an Android App. which can execute these functions, an effective analysis & design using UML and implementation method will be presented.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.30-35
• /
• 2009

In this paper, the type of inkjet heads and the control of head of inkjet printer are surveyed. The electronic parts of inkjet printer are composed of main- board and sub-board. The inkjet head is controlled by using these boards. The results from silver ink jetting experiment are given. The results show that the implemented inkjet system can give a satisfactory performance.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.2
• /
• pp.94-99
• /
• 2004

In this paper, We design a RF control system capable of handling multiple POS thermal printers. The system has three parts including embedded master controller, RF controller and high-speed thermal printer. Specially the designed linux embedded controller has simple structure and high performance to connect the TCP/IP network. The effectiveness of the developed RF control system is shown by proposed food ordering system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.135-139
• /
• 2009

Developer roller of laser printer cartridge made with magnetic substance and density of magnetic flux was decreased with the elapse of a year. Owing to this reason, quality of printing was decreased with decreasing of magnetic flux. This study investigated about the elapse of a year of magnetic substance and possible about usage of recycling production.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.309-314
• /
• 2009

PC users could experience some inconvenience when they use their PC that was physically connected to network printers shared by other People in the network due to the overload. This paper shows how to resolve this kind of overload problem and established the embedded printer system based on embedded Linux system which performs the printer server in order for any users in the of ice to do printing work more smoothly via current network. It's own capabilities and functions were verified throughout the various tests in practical environment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.441-444
• /
• 2000

BPA(Black Printer Algorithm)은 잉크젯 프린터에서 사용되는 C(사이안), M(마젠타), Y(옐로우) 잉크에 대한 검정(Black) 잉크의 양을 결정하는 알고리즘이다. CMY 잉크로 인쇄한 이미지의 칼라 품질은 모니터가 재생할 수는 있는 칼라 영역보다 적다. 또한 CMY 잉크를 각각 100% 씩 섞었을 때 이론적으로는 검정 색이 나와야 하나 실제는 검정 색을 정확하게 재현하지 못한다. 그래서 대부분의 프린터는 검정(K) 잉크를 기본으로 제공하며 CMY 잉크로 표현될 회색 영역의 부분을 검정 잉크로 대신 표현해 주기 때문에 프린터의 재현 영역을 확장시킬 수 있다. 또한 검정 잉크의 사용으로 인쇄품질의 색조 대비(contrast)를 증가시킬 수 있고 CMY 잉크를 검정 잉크로 대신 인쇄하기 때문에 CMY 잉크를 절약하는 효과를 얻을 수 있다. 본 논문에서는 본 잉크젯 프린터의 K(black) 잉크와 CMY(cyan, magenta, yellow) 잉크와의 관계를 살펴보았고 이 특성을 이용해 검정 잉크를 조절하는 방법 중에 하나인 3차 다항식의 BPA(Black Printer Algorithm)를 구현하였다. 결과에서는 성능 테스트에 대한 내용과 성능 향상을 위한 방법에 대해 논의하였다.