• 기본간호학회지
• /
• 제3권1호
• /
• pp.81-95
• /
• 1996

The purpose of this study was to investigate the effects of breast self-examination teaching methods which are printed material, videotape, demonstration used BSE model on women. The subjects for this study were non-medical professional 88 women in Kwangju. The data was collected from October 16 to November 24, 1995 by means of a structured questionnaire. For measuring BSE knowledge, Kim's(1994) instrument was used ard modified by researcher. For measuring BSE attitude based on health belief, Lee's(1982) & Kim's(1994) instrument was used and modified by researcher. Printed material from literature were reviewed by researcher, 'A woman's guide to breast self-examination' videotape by Nurse Practitioner Creation and BSE simulator by Narco were used 21 attitude scale and 13 knowledge scale were checked before and after teaching methods. The data was analyzed by frequency, paired t-test, ANOVA using the SAS program. The results were as follows : 1. The BSE total knowledge score after having teaching was higher than before, different significantly(t=-14.05, p=0.000). The most effective teaching method on BSE knowledge change was demonstration used BSE model in three teaching methods and was different significantly(F=8.44, p=0.000). 2. The BSE total attitude score after having teaching was changed to more positively, different significantly(t=4.59, p=0.000). The most effective teaching method on positive BSE attitude change was demonstration used BSE model in three teaching methods and was different significantly(F=3.21, p=0.045). 3. The HB score after having teaching was higher than before, and benefits, barriers and health concerns were different significantly(t=-2.51, p=0.014 ; t=-4.53, p=0.000 ; t=-3.71, p=0.000). Susceptibility and seriousness were not different significantly. 4. There were different significantly among knowledge, religion(F=3.92, p=0.013) and child (F=3.08, p=0.08). There were different significantly among attitude, age(F=4.65, p=0.05), mansturation state(F=4.39, p=0.016), and artificial abortion experience(F=5.18, p=0.026). There were different significantly among health concern, age(F=2.50, p=0.068), delivary experience(F=3.22, p=0.076), artificial abortion experience(F=5.46, p=0.023), and feeding(F=6.24, p=0.003). Printed material, videotape, and demonstration used BSE model may be valuable for changing positively knowledge and attitude related to BSE. Demonstration used BSE model was most effective teaching method in this study. Therefore, this study revealed that BSE teaching methods were a useful nursing intervention for promoting practice regularily and exactly on women.

• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.7-13
• /
• 2020

목적: 본 연구의 목적은 절삭 가공법 및 적층 가공법에 의해 제작된 3본 고정성 국소의치의 변연 및 내면 적합도를 비교하는 것이다. 재료 및 방법: 상악 좌측 제2소구치가 상실된 3본 고정성 국소의치 지대치를 제작하고(주모형), 구강 스캐너를 이용해 주모형 스캔 데이터를 얻었다. 3본 고정성 보철물은 다음과 같은 3가지 방법으로 제작하였다: Milled 3-unit fixed dental prostheses (FDP) (MIL군), digital light processing (DLP) 3D printed 3-unit FDP (D3P군), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P군). 보철물의 변연 및 내면 적합도와 내면 정밀도 평가하기 위해 각각 triple-scan protocol과 콤비네이션 수식을 사용하여 스캔 데이터를 중첩하였다. 3차원 분석 프로그램(Geomagic control X)을 사용하여 root mean square (RMS) 값과 color difference map 통해 정량 및 정성 분석 시행하였다. Kruskal-Wallis test (α = .05)와 Mann-Whitney U test 및 Bonferroni correction (α = .05/3 = .017)을 이용하여 통계 분석하였다. 결과: S3P군의 변연 적합도는 MIL군과 D3P군에 비해 우수하였으며, MIL군과 D3P군은 비슷한 수준을 보였다. D3P군과 S3P군은 MIL군에 비해 상대적으로 우수한 내면 적합도를 보였으며, D3P군과 S3P군 사이에는 유의한 차이가 없었다. 한편, MIL군, S3P군, 그리고 D3P군 순으로 우수한 정밀도를 보였다. 결론: 본 연구의 한계 내에서 적층 가공법으로 제작된 3본 고정성 보철물은 절삭 가공법으로 제작된 3본 고정성 보철물에 비해 우수한 변연 및 내면 적합도를 보인 반면 정밀도는 떨어지는 것으로 나타났다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.50-53
• /
• 2008

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.69-78
• /
• 2012

This research attempts to analyze how attributes of ad model influence on brand familiarity, personality, and preference among consumers. Attributes of ad model was classified into three; attractiveness, professionalism, and reliability. One hundred of consumers who lived in Daejeun City were selected as respondents for this research. The result of hypothesis I showed that attributes of ad model significantly influenced on brand familiarity. it was the result of hypothesis II that both Attractiveness and professionalism of ad model affected brand personality. It was also found that attractiveness and professionalism are significantly brand preference from the result of hypothesis III. In conclusion, findings showed that attractiveness of ad model mostly influenced on brand familiarity, personality, preference.

• 한국멀티미디어학회논문지
• /
• 제24권7호
• /
• pp.868-879
• /
• 2021

PCB (Printed Circuit Board) inspection using a deep learning model requires a large amount of data and storage. When the amount of stored data increases, problems such as learning time and insufficient storage space occur. In this study, the existing object detection model is changed to a continual learning model to enable the recognition and classification of PCB components that are constantly increasing. By changing the structure of the object detection model to a knowledge distillation model, we propose a method that allows knowledge distillation of information on existing classified parts while simultaneously learning information on new components. In classification scenario, the transfer learning model result is 75.9%, and the continual learning model proposed in this study shows 90.7%.

• 한국임상수의학회지
• /
• 제34권6호
• /
• pp.463-466
• /
• 2017

A 3-year-old, 26 kg, castrated male Chow Chow was presented for assessment of weight-bearing lameness of the left hind limb. The patient had a history of triple pelvic osteotomy on the left side to correct hip dysplasia 2 years prior to his presentation of clinical signs and underwent total hip replacement on the right coxofemoral joint 1 year later. Upon physical examination, pain and crepitus were noted on the left hip joint during extension. Radiological examination revealed coxofemoral joint subluxation and moderate degenerative bone changes on the left hip joint and pelvic axis, which relates to acetabular angles that were changed after triple pelvic osteotomy (TPO). Preoperative computed tomography was used for 3-dimensional printing to establish an accurate surgical plan. The changed angles of the acetabulum after TPO were evaluated, and rehearsal surgery was performed using a 3-demensional printing bone model. Three months after the THR surgery, the function of the affected limb had improved, with no lameness. Complications, such as luxation and implant failure, were not observed until 6 months after the operation. Accurate evaluation of acetabulum angles and rehearsal surgery using a 3D-printed bone model is effective for total hip replacement after unsuccessful TPO.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.320-323
• /
• 2005

This paper discusses heat problem of IC, which composes the electronic instruments, to guarantee reliability of electronic instruments. And also proposes the unified equivalent model for various electronic instrument products to guarantee reliability and life of its parts. Because electronic instruments are down sizing and operated with high frequency, the internal temperature of electronic instruments is rising steadily. The internal temperature of the electronic instruments gives a big effect to electronic instrument's reliability and life. The semiconductor parts are the representative heat generation parts because of its complicated function, high frequency and high density. Consequently, guaranteeing reliability and life of electronic semiconductor is the important start point in securing the reliability and life of the electronic instrument product. Unfortunately, there are many factors, which affect heat dissipation efficiency. The heat dissipation efficiency follows the environment where the electronic instrument products are used. Therefore it is very difficult to define reliability and life of the electronic manufactures. Electronic instrument products are composed of printed circuit board (PCB), integrated circuit (IC), resistance, and capacitor and so on. And there are superposed thermal resistances, because the parts are arrayed on the printed circuit board (PCB), Therefore the total thermal resistance is variable. Consequently it cannot have same thermal model for each electronic instrument products. In the next part, we propose the unified equivalent model for various electronic instruments. And using the proposed equivalent model proofs the method for analysis reliability of electronic parts.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.25-34
• /
• 2000

Recently, color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reprodution models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka--Munk, relaxed version of spectral Neugebauser. In such results, the Kubleka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.29-40
• /
• 2000

Recently. color proofing in printing industry grow rapidly. If an order decide color from known color information in the case of color reproduction, we can reduce expenses and time. In color proofing the best important point must be closed proofed color to primary color and secondary color. Model-based approaches have the advantages of faster recharacterization and the opportunity of simulating product enhancements such as changes in ink properties and halftoning. In this paper, we transformed the dot area of CMYK to CIELAB color space using color reproduction models. Firstly, we measured spectral reflectance of primary color printed by Matchprint II and the data was used to find tone reproduction curve using regression equation, and than we applied at primary color model, such as Murray-Davies, Yule-Nilsen, and mixed color model, such as Kubelka-Munk, relaxed version of spectral Neugebauer. In such results, the Kubelka-Munk model resulted in the best spectral reconstruction accuracy followed by relaxed version of spectral Neugebauer model, color difference is 2.8401.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.59-64
• /
• 2020

In this paper, we found the solution using data based machine learning regression method to check the pore shape, to solve the problem of the experiment quantity occurring when producing scaffold with the 3d printer. Through experiments, we learned secured each print condition and pore shape. We have produced the scaffold from scaffold pore shape defect prediction model using multiple linear regression method. We predicted scaffold pore shapes of unsecured print condition using the manufactured scaffold pore shape defect prediction model. We randomly selected 20 print conditions from various predicted print conditions. We print scaffold five times under same print condition. We measured the pore shape of scaffold. We compared printed average pore shape with predicted pore shape. We have confirmed the prediction model precision is 99 %.