• Journal of Korean Library and Information Science Society
• /
• v.5
• /
• pp.119-168
• /
• 1978

This is a survey of the reserved book system in the pilot universities in Korea. We have surveyed only 22 university libraries among 29 pilot schools as of 1977, because of the differences in the library users, library organization, library facilities, and library materials between universities and colleges. In 1972, the Korean Ministry of Education developed a reformation plan for their higher education based on the teaching method of curriculum-oriented faculty instead of that of the faculty-oriented curriculum. The former puts emphasis on the cultivation of a student's thinking, creativity, and judgement through self-teaching to do a given assignment. The reserved book system in a college or university library is one of the most important methods necessary to accomplish the above educational aim. The survey used a questionnaire with 50 question on 28 items concerning the various aspects of the reserved book system in 22 pilot universities. the survey result discovered many problems needing correction. The following list describes the measures needed to correct the problems found in the pilot universities. 1. The management of a centralized reserved book system is much more effective and economical than the decentralized reserved book system when a university is located on the same campus. 2. In the university library, an independent reserved book department requires to gain the desired educational aims as compared with the reserved book room controlled by any other department in the library. 3. The reserved book system should not be adopted by all the departments at once but enlarged gradually, for it needs the understanding and support of faculty members and the university itself. 4. As competence is essential to the effective operation of the reserved book room, the university library should not place an unqualified person in charge of the reserved book department. 5. The librarian in charge of the reserved book department is required to do more professional works such as analysis of users, collection and analysis of syllabuses, maintenance of faculty member cooperation, establishment of measures to acquire unavailable materials, and drawing up an effective management plan. However, he is spending most of his time in clerical works, that is, non-professional works. 6. Three to five titles of each reserved book are considered reasonable and required materials should be shelved in proportion to the number of students, that is, one copy per eight or ten students if the materials are allowed to lend for two hours at a time. For the supplementary materials, the library needs to place two or three copies per subject. 7. Professors must select reserved books with care so that they can be used year after year. 8. Few universities are asking professors the number of class students and the date when the reserved material will no longer be needed on reserve. 9. The library should gather all the lists of reserved books from every professor at least three to five months before the courses open, because it takes a long time to obtain foreign materials. 10. It is desirable that the reserved book department should collect the lists and prepare the materials with promptness and consistency. 11. Instead of block buying, it is desirable to purchase reserved books at the time the library gets the reserved book list from the professors. The library should also inform faculty members whether it obtained each reserved book or not before the course open. 12. The library should make a copy of materials if a professor requires to reserve an out-of-print book or partial contents of a book, journal, and thesis. 13. An independent budger for reserved books from the budget for general materials is desired. 14. The shelf arrangement of reserved books by courses or professors under the same department is much more preferable than a classified arrangement. 15. While most of the universities adopted the open shelves system for all the reserved books, it is more effective and economical to take a compromise system, that is, closed shelves for requires materials and open shelves for supplementary materials. 18. Circulation of reserved books needs a different system between required materials and supplementary materials: two or three hours and/or overnight loan for the former and two and/or three days loan for the latter. 17. A reserved book room should be open a long time after class so that students can have sufficient time to use the room. 18. The library must take daily and monthly statistic as well as statistics on every aspect of the reserved book system in order that the library ma decide on policy and management of the reserved book room in collaboration with the university. Furthermore, regular reports on the use of the reserved book room should be made to the president and the executive council by the library to acquire their understanding and cooperation for the reserved book system. 19. Cooperation of faculty members is indispensable to the effective management of the reserved book department and it is desirable to make a committee which will fix various decisions about the system. Whenever the director of the library make his decision, he must consult with his staff in order to involve them earnestly in the operation of the system.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.5
• /
• pp.23-37
• /
• 2007

Background: Even though cervical cancer poses a significant global cancer burden, successful implementations for early detection offer an opportunity to prevent deaths and reduce the cancer burden. In Korea, cervical cancer is the most prevalent type of cancer among adult women, but it is one of the few cancers in which a consensus-approved screening test exists for early diagnosis, Pap test, that can be combined with highly efficacious treatment regimens for early-stage disease. Purpose: This study was carried out to identify the cognitive-behavioral factors associated with cervical cancer screening behavior among adult women, aged 40 to 59, and to develop tailored messages and to evaluate the effectiveness of stage-matched educational program. Method: A total of 283 women who aged 40 years or older was recruited in Seoul, from September, 1st to November, 14th, 2003. The intervention group (N=162) and the control group (N=121) were selected from five sub-districts in Seocho-gu, Seoul. Building on the TTM, a quasi-experimental study was conducted to test the effectiveness of stages-matched intervention addressed at the five stages of cervical cancer screening behavior. Women in the intervention group were randomly assigned to one of two conditions, internet or postal services. Results: In our results, 88.9% of participants had received a Pap test at least once in their life-time, and 65.4% had got it in the past two years. With regard to cognitive-behavioral factors, the stages-matched educational program increased attitude and process of change for cervical cancer screening. The percentage changed was the largest in maintenance stage. With regard to delivery methods for tailored messages, the print materials were more effective at increasing screening adherence than the e-mail. Whereas the postal service group showed remarkable the change of behavior stage, the internet service group did not. Also it was not shown any difference of the satisfaction with stages-matched educational program between internet and postal service groups. Conclusion: This study suggested that cervical cancer screening behavior could be changed by tailored messages which had developed with cognitive-behavioral factors. The stages-matched educational program was effective to promote the screening adherence for cervical cancer.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• The Korean Journal of Air & Space Law and Policy
• /
• v.7
• /
• pp.101-134
• /
• 1995

Article 3 Paragraph 1 of the Warsaw Convention regulates the requirements of passenger tickets, Article 4 Paragraph 3, the requirements of baggage tickets, Article 8, the requirements of airway bills. In this article the writer has discussed the legal nature of the documents of air carriage, such as air waybills, passenger tickets and baggage checks. Further, the writer has also discussed several issues relating to the use of the documents of air carriage under the Warsaw Convention. Article 3 Paragraph 2, as well as Article 4 Paragraph 4 and 9 provides that the carrier shall not be entitled to avail himself of the provisions of the Convention which evade or limit his liability. In particular, the Montreal Agreement of 1966 provides that the notification on the carrier's liability in passenger ticket should be printed in more than 10 point type size with contrasting ink colors. However, another question is whether the carrier shall not be entitled to avail himself of the liability limit under the Convention in case the type size is below 10 points. The Convention does not specify the type size of certain parts in passenger tickets and only provides that the carrier shall not be entitled to avail himself of liability limit, when a carrier fails to deliver the ticket to passenger. However, since the delivery of passenger tickets is to provide an opportunity for passengers to recognize the liability limit under the Convention and to map out a subsequent measures, the carrier who fails to give this opportunity shall not be entitled to avail himself of the liability limit under the Convention. But some decisions argue that when the notice on the carrier's liability limit is presented in a fine print in a hardly noticeable place, the carrier shall not be entitled to avail himself under the Convention. Meanwhile, most decisions declare that regardless of the type size, the carrier is entitled to avail himself of liability limit of the provisions of the Convention. The reason is that neither the Warsaw Convention nor the Montreal Agreement stipulate that the carrier is deprived from the right to avail himself of liability limit of the provisions of the Convention when violating the notice requirement. In particular, the main objective of the Montreal Agreement is not on the notice of liability limit but on the increase of it. The latest decisons also maintain the same view. This issue seems to have beeen settled on the occasion of Elisa Chan, et al. vs. Korean Airlines Ltd. The U.S. Supreme Court held that the type size of passenger ticket can not be a target of controversy since it is not required by law, after a cautious interpretation of the Warsaw Convention and the Montreal Agreement highlighting the fact that no grounds for that are found both in the Warsaw Convention and the Montreal Agreement. Now the issue of type size can hardly become any grounds for the carrier not to exclude himself from the liability limit. In this regard, any challenge to raise issue on type size seems to be defeated. The same issue can be raised in both airway bills and baggage tickets. But this argument can be raised only to the tranportation where the original Convention is applied. This creates no problem under the Convention revised by the Hague Protocol, because the Hague Protocol does not require any information on weight, bulk, size, and number of cargo or baggage. The problem here is whether the carrier is entitled to avail himself of the liability limit of the provisions of the Convention when no information on number or weight of the consigned packages is available in accordance with Article 4 of the Convention. Currently the majority of decisions show positive stance on this. The carrier is entitled to avail himself of the liability limit of the provisions of the Convention when the requirement of information on number and weight of consigned packages is skipped, because these requirements are too technical and insubstancial. However some decisions declare just the opposite. They hold that the provisions of the Convention Article 4 is clear, and their meaning and effect should be imposed on it literally and that it is neither unjust nor too technical for a carrier to meet the minimum requirement prescribed in the Convention. Up to now, no decisions by the U.S. Supreme Court on this issue is available.

• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.27-31
• /
• 2009

Now a days, the Medical X-ray equipments has become digitalized from analog type such as film, cassette to CR, DR. And many scientists are still researching and developing the Medical X-ray equipment. In this study, we used the Bismuth tri-iodide to conversion material for digital X-ray equipments and we couldn't get the satisfying result than previous study, but it opened new possibility to cover the disadvantage of a-Se is high voltage aplly and difficultness of make. In this paper, we use $BiI_3$ powder(99.99%) as x-ray conversion material and make films that have thickness of 200um and the film size is $3cm{\times}3cm$. Also, we deposited an ITO(Indium Tin Oxide) electrode as top electrode and bottom electrode using a Magnetron Sputtering System. To evaluate a characteristics of the produced films, an electrical and structural properties are performed. Through a SEM analysis, we confirmed a surface and component part. And to analyze the electrical properties, darkcurrent, sensitivity and SNR(Signal to Noise Ratio) are measured. Darkcurrent is $1.6nA/cm^2$ and sensitivity is $0.629nC/cm^2$ and this study shows that the electrical properties of x-ray conversion material that made by screen printing method are similar to PVD method or better than that. This results suggest that $BiI_3$ is suitable for a replacement of a-Se because of the reduced manufacture processing and improved yield.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.219-234
• /
• 2014

Fabrics, natural dyed fabrics, papers, natural dyed papers and paints were examined effects of colors and mechanical properties for materials of museum collections under anoxic treatment. Anoxic conditions using nitrogen and argon were oxygen concentration 0.01%, temperature($20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$), 50% RH and exposure time 30 days. Examined fabrics were raw silk fabric, UV irradiated raw silk fabric, degummed silk fabric, UV irradiated degummed silk fabric, cotton fabric, and UV irradiated cotton fabric. Natural dyed silk and cotton fabrics were dyed with fresh indigo, indigo, safflower, gromwell, madder sappanwood, amur cork tree, turmeric, gardenia, barberry root, pagoda tree flower, cochineal, lac, alnus japonica, gallnut, chestnut shell, and combination(indigo and safflower, indigo and amur cork tree, indigo and pagoda tree flower, indigo and sappanwood). Papers were Korean papers(mulberry paper, mulberry(70%) and rice straw(30%) mixed paper), Japanese paper(gampi paper), cotton paper, refined linen paper, cotton, linen & manila mixed fibre furnish, copy paper, news print, and alum sized mulberry paper. Natural dyed papers were dyed with indigo, sappanwood, madder, safflower, gardenia, amur cork tree, and pagoda tree flower. Paints were painted on alum-sized papers and silk fabrics using glue and pigments(azurite, malachite, cinnabar, vermilion, orpiment, gamboge, red lead, haematite, iron oxide red, indigo(lake), lac, cochineal, safflower, madder root lake, celadonite, smalt, ultramarine blue, lapis lazuli, prussian blue, kaolin, lead white, oyster-shell white, and clam-shell white). The color differences(${\Delta}E^*$) of all examined materials were below 1.5 or lowered than control samples after anoxic treatment. The variations of tenacity of yarns of fabrics and natural dyed fabrics after anoxic treatment were within that of standard silk and cotton fabrics. Gases(nitrogen and argon) and temperatures of anoxic treatment did not also affected color differences and variations of tenacity of materials.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.69-73
• /
• 2011

Unlike land fires, Fires on board a ship are not likely to be extinguished by skilled human resources using a variety of fire fighting equipments, but have to be brought under control on board a ship itself despite of difficult task. There are more cases of deaths from suffocation by smoke than from an increased temperature by heat in fires on board ships, because crew fail to secure a sufficient visibility range enough to escape from the scene of a fire or to leave the ship as early as possible. On the assumption that the height of ship's accommodation area increases from 2.0m to 2.3m comparable to the height of apartments on the ground in Korea, behaviors of fire smokes between the cases of 2.0m and 2.3m heights were compared and analyzed. Based on the blue print of the existing Training Ship "Hanbada", a new blueprint with the 30 cm height adjustment was additionally created. FDS (Fire Dynamic Simulator), which was created by the NIST in the United States and is the most widely distributed simulator for fires, was used to conduct a simulation and predict results. The results of simulation on the basis of temperature of $60^{\circ}C$ showed a safe evacuation period of time at the position 10m apart from the scene of a fire to increase by 55.8 seconds, when the height of ship's accommodation area increased from 2.0m to 2.3m. The results of simulation on the basis of visibility range of 6m showed the safe evacuation periods of time at the positions 10m, 20m and 30m apart from the scene of a fire to increase by 27.1 seconds, 109.2 seconds and 73.3 seconds, respectively, as the height of ship's accommodation area increased from 2.0m to 2.3m. This means that crew can escape more safely from a scene of fires on board when the height of ship's accommodation area is increased and equal to the height of living room in a building on land.

• Journal of Nutrition and Health
• /
• v.43 no.2
• /
• pp.197-206
• /
• 2010

Now a days, people eat outside of the home more and more frequently. Menu labeling can help people make more informed decisions about the foods they eat and help them maintain a healthy diet. This study was conducted to develop menu labeling system using Nutri-API (Nutrition Analysis Application Programming Interface). This system offers convenient user interface and menu labeling information with printout format. This system provide useful functions such as new food/menu nutrients information, retrieval food semantic service, menu plan with subgroup and nutrient analysis informations and print format. This system provide nutritive values with nutrient information and ratio of 3 major energy nutrients. MLS system can analyze nutrients for menu and each subgroup. And MLS system can display nutrient comparisons with DRIs and % Daily Nutrient Values. And also this system provide 6 different menu labeling formate with nutrient information. Therefore it can be used by not only usual people but also dietitians and restaurant managers who take charge of making a menu and experts in the field of food and nutrition. It is expected that Menu Labeling System (MLS) can be useful of menu planning and nutrition education, nutrition counseling and expert meal management.