• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.50-50
• /
• 2017

Swampland is a potential alternative land to be used in various agricultural production activities in Indonesia, because Indonesia have 33.41 million hectares of swamp land that consists of 13.28 million hectares nontidal swamp and million hectares 20.13 tidal swamp. In the province of South Sumatra, because of unpredictable water level in the field before planting, farmers have been doing agronomic adaptation method through the delay time of transplanting and forced to apply more than one the nursery practice with the combination of a floating nursery method and a dry-bed nursery method. This study was aimed to (1) evaluate the seedling growth and tillering pattern of several popular Indonesian rice varieties, and (2) look for alternative technologies to get a better rice seedlings under two nursery methods in the nontidal swamp land. In the first experiment, the seedling growth characteristics of five rice varieties (Ciherang, Inpara 5, Inpara 9, Inpari 29, and Inpari 30) was evaluated by two methods of nursery, i.e. floating nursery and dry-bed nursery. In the second experiment, rice variety of Inpari 30 was treated with Zn seed priming and foliar fertilizer of 2,300 ppm N at the nursery stage. Those treatments were combined with the time of seedling under floating and dry-bed nursery. The results of the first experiment showed that of the five varieties tested, dry-bed nursery method showed better seedling growth than floating nursery. This was indicated by high leaf number, tiller number, tillers pattern, shoot-root ratio and relative growth rate. Ciherang and Inpari 30 showed high tiller number, and they had produced tertiary tiller in the sixth week of observation. Moreover, shorter period of floating and dry-bed nursery in combination with the treatment of Zn seed priming and spraying seedling with foliar fertilizer N could improve the growth of seedlings.

• Journal of Chest Surgery
• /
• v.13 no.1
• /
• pp.48-51
• /
• 1980

Open heart surgery patients have additional risks arising from the special nature of the operative procedure. And postoperative infections in patients with extracorporeal circulation are associated with high incidence of serious sequelae. To investigate the incidence and organisms of contamination, and the relation between the duration of extracorporeal circulation and contamination, following study was done. Eighty-four of the open heart surgery patients were examined with cultures from the blood and priming solution before and after bypass. 1. Cultures before bypass were sterile, but 2 cases of cultures from the blood and priming solution after bypass were positive, and culture positive group was 5% of all patients. 2. The organisms were Gram-negative, aerobic coliform bacilli; 3. The culture positive group had significantly longer bypass time.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.200-204
• /
• 2006

본 연구에서는 새로 고안된 NOT-AND 논리에 의한 방전 논리 gate PDP의 입력 DC 방전특성에 대해 고찰하고 동작특성을 해석하였다. 새로 고안된 방전 AND gate는 방전 경로에 따른 전극사이의 전위차의 변화로 AND 출력을 유도한다. 이러한 방전 논리 소자를 가지는 PDP에서는 직류방전이 논리게이트의 역할을 한다. 실험결과 이 DC 입력방전을 위해 priming 방전을 인가한 경우가 인가하지 않은 경우에 비해 방전지연시간이 1/3로 단축되며 방전개시전압은 1/2로 감소하였다. 또한 이 priming 방전은 방전종료후 $30{\mu}s$ 정도까지 영향을 미친다. 그리고 이 직류방전의 시간적, 위치적 방전특성을 측정한 결과, 방전에 따른 시간적 거리의 변화는 상당한 영향을 미치나 인접 전극들의 위치적인 영향은 거의 미미하다는 결론을 얻었다.

• Proceedings of the KACD Conference
• /
• 2002.11a
• /
• pp.713-713
• /
• 2002

No Abstract, See Full Text

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.214-214
• /
• 2017

Seeds of Tomato (Lycopersicon esculentum Mill.) have demanded high quality because of their high cost of seed. The optimization of the seed priming techniques that have positive effect on fast and uniform germination becomes important at the commercial level. Several factors such as solution composition, osmotic potential, and treatment duration affect seed priming response. In this study, osmotic potentials of priming solution and germination characteristics of primed seed were investigated to clarify the effects different inorganic salt types and the duration. Tomato seeds were primed in osmotic solutions that were osmotic potential ranged -1.54 to -0.45 MPa in an aerated solution of PEG 8000 (17%, 22%, 27%), and inorganic salt solution of $KNO_3$, $Na_2SO_4$, and $K_2SO_4$ (100, 200, 300mM). The seeds were treated at $20^{\circ}C$ for 2, 4, and 6 days. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$. Four replications of 25 seeds per each treatments were placed in 10-cm petri dishes containing two filter papers and 3 ml of $dH_2O$ and incubated at $20^{\circ}C/30^{\circ}C$ and $15^{\circ}C$ and seedlings evaluated for abnormality after 14 days of incubation. Seed water potential (${\psi}$) was correlated with water potential of priming solution ($r^2=0.86$). Seeds primed in 100mM $KNO_3$ resulted the highest germination rate (GR, $63.9 %{\cdot}day^{-1}$) and lowest mean germination time (MGT, 2.0 days) comparing to untreated control ($23.9%{\cdot}day^{-1}$ of germination rate and 4.1 days of MGT) at $20/30^{\circ}C$, even though 96% of germination percentage were not different. Seeds primed in 100mM $KNO_3$ (${\psi}=-0.45MPa$) for 4 days showed ${\psi}=-0.38MPa$. Priming in $Na_2SO_4$, $K_2SO_4$, and PEG solution for 6 days improved MGT and GR, but not significantly than 4 days of treatment. Additionally, stepwise osmotic solution treatment with 100mM and 300mM concentration for 6 day did not showed differences with single treatment. In relation to osmotic potentials, identical osmotic potential in different inorganic salt solution showed different effect on germination characteristics.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.515-521
• /
• 2007

Aprotinin, a serine protease inhibitor, has been used to ameliorate the inevitable consequences, including blood component injury after cardiac surgery with cardiopulmonary bypass (CPB). However, there are many arguments on its dosage or usage. We assessed whether administration of low dose of aprotinin in only priming solution has any beneficial effect or reduces its side effects on cardiac surgery. Thirty patients scheduled for elective cardiac surgery were randomly assigned to aprotinin group (n=15) which received aprotinin in priming solution (two million kallikrein inhibitory unit, KIU) and added one million KIU at 1 hour after the beginning of CPB or control group (n=15) which did not receive it. Hematological and biochemical variables, cytokines and cardiac marker levels, and postoperative outcomes were compared between two groups at before, during or after operation. Platelet count in aprotinin group was higher than that of control group at postoperative 24 hr. Activated partial thromboplastin time in aprotinin group was longer than that of control group at intensive care unit (ICU). Troponin-I level and postoperative blood loss volumes in aprotinin group were lower than those of control group at ICU. There were no significant differences between the two groups on the others. These results showed that low dosage of only priming solution during cardiac surgery with CPB reduced platelet destruction and postoperative bleeding, and attenuates myocardial damage. However, further studies need to be carried out with more population or pediatric patients for evaluating various aprotinin usage.

• The Journal of Information Systems
• /
• v.26 no.1
• /
• pp.21-51
• /
• 2017

Recently there have been an increasing number of companies suffering a negative brand image in the major media. Thompson et al. (2006) defined this as "$Doppelg{\ddot{a}}nger$ Brand Image." The images mentioned above have been created and propagated on Internet communities, which are one of the major paths of online spreading. This study will empirically analyze the effect of each $Doppelg{\ddot{a}}nger$ brand image on the customer's brand attitude, using a text-mining method focusing on "A company"'s case. This study will also cover the change in customer brand attitudes related to the company's correspondence in a situation in which the $Doppelg{\ddot{a}}nger$ brand image exists. In addition, the study will determine the presence of a priming effect after the spread of the $Doppelg{\ddot{a}}nger$ brand image. To that end, we collected 974 comments from 94,889 posts and A's official blogs related to A from B community, the largest automobile community site in Korea. Through this investigation, we obtained the following results. First, there was a significant difference in the ratio of negative sentiment of internet community before and after $Doppelg{\ddot{a}}nger$ brand image. Second, with regard to the topic modeling, the ratio of articles including negative topics increased and the other article ratio decreased over time. Finally, we found that there is a priming effect about negative brand image of "A company."

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.28-34
• /
• 2007

In this research, the characteristics of the DC discharge that was the logical gate input of discharge logic gate PDP newly proposed was considered. The logical output is induced by controlling the potential difference of inter-electrode according to the discharge path in the discharge logic gate. From the experimental result the discharge time lag was shortened to 1/3 and the voltage has decreased to 1/2 in the case to apply priming discharge for improving stability of these DC discharges compared with the case when it is not applied. Moreover, after the priming discharge ends, the space charge generated by this discharge influences it up to about $30[{\mu}s]$. And, as a measured result of the influence that the space charge exerts on the DC discharge with the change in time and spatial distance, it has been understood that there is a possibility that going away spatially can slip out the influence of the discharge easily as for going away from the discharge time-wise. Therefore the conclusion that the discharge logic gates of each scanning electrode can be operated independently is obtained.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.39-44
• /
• 2001

The conditions of the wall charges and priming particles in a unit discharge cell in AC PDP seriously affect the addressing discharge characteristics in the driving method with ramped setup pulse. Moreover, the discharge conditions at the end of the scan line may be different from the first scan line because of the difference of about 1ms address time. Consequently, the addressing time and its dispersion may be different for any two discharge cells that lead to misfiring and the increase in the total addressing time. In order to improve the addressing time and its dispersion, we have applied different addressing voltage at each cell such as progressively increase pulse voltage instead of constant one. As a result, the addressing time and its dispersion of all cells were improved by about 30% compared with the conventional driving method.