• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.5-12
• /
• 2009

Seed priming is a useful technique for rapid and uniform seed germination as well as early seedling establishment. This experiment was conducted to find out the optimum condition for Sorbus alnifolia seed priming with four concentrations of four reagents in germination property and seedling growth performance. The results are summarized as follows: Percent germination (PG) varied 2.67% to 24.67%, and S. alnifolia seeds had the highest PG in the treatment that were primed in 100mM $KNO_3$ solution for 2 days. Mean germination time was the shortest in 200 mM $KNO_3$ solution for 2 days. Seed priming with $KNO_3$ solutions increased germination speed (GS) and germination performance index (GPI) compared with non-primed seeds. Especially seed primed with 100 mM $KNO_3$ solution for 2 days showed the highest GS and GPI. The highest relative growth rate (RGR) and seedling vigor index (SVI) was significantly (p<0.05) different from the control and other treatments, respectively. RGR of height (0.0071) and root collar diameter (0.0141) of seedling from primed seeds were the highest in 400 mM NaCl solution for 2 days. The highest SVI (5.43) was observed in the seedlings from seeds primed in 100 mM $KNO_3$ solution for 2 days. Consequently, the optimum reagent and concentration were $KNO_3$ and 100 mM for the effective germination and seedling growth in S. alnifolia

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.373-381
• /
• 2017

The main objective of this study was to increase the germination percentage of kenaf seeds with less number of times under non-saline and saline conditions. Therefore, the first goal was to assess the response of kenaf seeds to NaCl. The second goal was to evaluate the effects of $KNO_3$ on kenaf seed germination. The germination percentage exhibited a decreasing tendency in germination rate. Plant dry weight was approximately 0.2 g in all treatments at 5 days after germination. As time passed, the electrical conductivity (EC) value of hydro-priming (HP) consistently increased by 8.7 mS/cm at 24 hours of immersion. However, seeds primed with $KNO_3$ showed no difference in EC values even as times passed. Regarding the priming effect, priming in 100 mM $KNO_3$ concentration for 12 hours increased germination up to 85% in $H_20$ solution and in 0 mM $KNO_3$ concentration upto 73.8% under 0.3% NaCl solution, compared to that of Control. Germination synchronization, shoot length, and leaf unfolding of primed seeds were greater than those of the Control. In addition, main root and hair roots appeared more rapidly in the treated seeds and were more abundant compared to that of the Control. The T50 (times to reach 50% of the final germination percentage) of the Control in both $H_20$ and 0.3% NaCl solutions was 18 and 22 hours, respectively. However, when treated $KNO_3$ priming (0 to 100 mM) in $H_20$ and 0.3% NaCl solution, 9 hours was sufficient to reach T50. Primed (hydro-priming and $KNO_3$) seeds had a lower MDG (mean days untill germination; 0.6-0.62) compared to that of the Control (1.13-1.31) in $H_20$ and 0.3% NaCl solutions. Regarding dry weight of plants after priming, an increasing tendency after the priming treatment in the H20 solution was observed. Furthermore, no significant difference in plant dry weight under 0.3% NaCl stress was observed between the Control and primed seeds. Taken together, the results suggest that 50-100 mM $KNO_3$ priming for 24 hours optimize seed germination rate in less number of times of exposure with great vigor. Therefore, it is recommended for kenaf seed invigoration before planting.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.1-7
• /
• 2001

To analyze the driving principle of PDP, the influence on the discharge characteristics of space charge was researched. Space charge generated by the priming discharge shortens delay time of the discharge which happens as follows and shorts response time. Such influences are valid up to about 30㎲ after generating priming discharge. This space charge decreases dicharge ignition voltage of the cell near priming cell and the influences are most greatly alerted on the discharge of cell which is adjacent most. And the dependency to spare charge strengthens because discharge ignition voltage drop grows by narrowing of discharge pulse width. But the influence on space charge was observed very slightly in pulse width 1㎲ or more. Therefore, to cause a steady discharge, pulse width should become 1㎲ or more at least without being influenced for space charge of the adjoining discharge.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.213-213
• /
• 2017

High quality seed of proso millet that has high germination percentage, germination speed, and uniformity demanded to increases rates of mechanization in cereal crop cultivation. In order to improve germination characteristics, proso millet seeds were treated with red light, ultrasonication and liquid smoke (LS) solution that generated from hickory wood. All treatments were performed in seed priming solution with 100mM $NH_4NO_3$ at $15^{\circ}C$ for 24hrs under aeration condition. Seeds were exposed under light intensity of 2000 lux for 15m, 30m, 60m, and 120m in priming solution. Ultrasonic treatment was performed at 60%, 80%, and 100% intensity of 21.6 KHz for 5m, 10m, and 20m in priming solution. For LS treatment seed were soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted solution with $dH_2O$ or 100mM $NH_4NO_3$ solution. The effect of seed treatment was evaluated with germination percentage (GP), mean germination time (MGT), germination index (GI), germination rate (GR), Germination uniformity (GU) and heath seed percentage (HS). Our results demonstrate that red light (15min) or ultrasonication (21.6kHz, 5min) treatment improved MGT, GI, GR, and GU comparing to untreated control. Importantly, we show that LS treatments have significant effect on the health seedling and germination characteristics. Proso millet seeds that treated with 5% LS solution for 24hrs improves HS up to 97% that similar results obtained in 100mM $NH_4NO_3$ priming for 24hrs. The combined treatment with LS solution and 100mM $NH_4NO_3$ priming were not effective in all treatments. Our results demonstrate that treating seeds with LS or 100mM $NH_4NO_3$ priming or ultrasonication improves germination characteristics. The methods described here will help advance research using this species by increasing the germination performance at which successive seed pellet process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.194-198
• /
• 1998

An experiment was carried out to find out the priming effects of rice seeds, Oryza sativa L. (cv. Ilpumbyeo) on. the seedling establishment and early emergence under excess soil moisture conditions. Seeds were primed by soaking in -0.6 MPa polyethylene glycol (PEG) solution at $25^{\circ}C$ for 4 days. The primed seeds were sown in soils with various soil moistures (60, 80, 100, 120, and 140% field capacity) at 17 and $25^{\circ}C$, respectively. Germination and emergence rates, plumule height, and radicle length of primed seeds were higher than those of untreated seeds at any soil moisture and temperature examined. The time from planting to 50% germination ($T_{50}$) of primed seeds was less than that of untreated seeds by 0.9～3.7 days. Germination rate, emergence rate, plumule height, and radicle length were highest at the soil moisture of 80% field capacity among the soil moistures. Priming effects of rice seeds on germination and emergence rates were more prominent under the unfavorable soil moistures (60, 100, 120, and 140% field capacity) than those under the optimum soil moisture condition (80% field capacity). However, priming effects on seedling growth were greater at near optimum soil moisture compared with too lower or higher soil moistures. Therefore, these findings suggest that priming of rice seeds may be a useful way for better seedling establishment under the adverse soil conditions.

• Weed & Turfgrass Science
• /
• v.3 no.3
• /
• pp.232-239
• /
• 2014

Zoysiagrass seeds had low germination or lack of germination uniformity under natural condition. To improve the final germination percentage of zoysiagrass seeds, we investigated the methods of proper pre-treatment to enhance germination rate of zoysiagrass. Seeds were subjected to the testa scarification and four types of seed priming methods, namely, hydro priming (distilled water), osmotic priming (polyethylene glycol -0.5 MPa, -1.0MPa, -2.0 MPa), halo priming (Potassium nitrate 100 mM, 200 mM, 400 mM), and solid matrix priming (seed : microcel-E : distilled water = 4:1:8) with and without 25% KOH treatment in the testa. The scarification improved the germination rate and reduced the germination time. Osmotic priming (PEG -0.5 MPa) with scarification were significantly increased the seed germination rate and decreased MGT, and $T_{50}$. Seed germination rate obtained by osmotic priming (PEG -0.5MPa) with scarification increased above 60% in comparison with natural condition. Conclusively, scarified and primed zoysiagrass seed germinated more rapidly and uniformly in the study. The present results suggested that PEG priming treatment with KOH treatment prior to sowing could improve germination percentage, and this method makes us establish the early zoysiagrasses in the field.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.334-334
• /
• 2017

Unstable soil moisture conditions often negatively affect the emergence, seedling establishment, and growth uniformity at the initial stage, and then reduce the grain yield and biomass in direct seeding cultivation for rice in rainfed fields. Therefore it is important to develop a technique to increase the rapid and stabilized seedling establishment and improve the uniformity of initial growth after sowing. This study aims to confirm results on seed priming effect of indoor using petri dish experiments can be reproduced in the field using container at Ghana. Twenty-seven rice varieties including of Oryza sativa L. and O. glaberrima Steud. were used in this study. The experiments using petri dish and container with different soil moisture conditions (5%, 10%, 15%, 20%) were compared. As a result, a significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and emergence time uniformity in the primed seed of container in 10% and 15% soil moisture condition. A significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and plant height in the primed seed of container in 10% soil moisture condition in O. glaberrima. This study concluded that the priming effect in petri dish demonstrate those in container in the field condition of Ghana in 10% and 15% soil moisture condition during seedling stage.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.53-53
• /
• 2017

Unstable soil moisture conditions often negatively affect the emergence, seedling establishment, and growth uniformity at the initial stage, and then reduce the grain yield and biomass in direct seeding cultivation for rice in rainfed fields. Therefore it is important to develop a technique to increase the rapid and stabilized seedling establishment and improve the uniformity of initial growth after sowing. This study aims to confirm results on seed priming effect of indoor using petri dish experiments can be reproduced in the field using container at Ghana. Twenty-seven rice varieties including of Oryza sativa L. and O. glaberrima Steud. were used in this study. The experiments using petri dish and container with different soil moisture conditions (5%, 10%, 15%, 20%) were compared. As a result, a significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and emergence time uniformity in the primed seed of container in 10% and 15% soil moisture condition. A significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and plant height in the primed seed of container in 10% soil moisture condition in O. glaberrima. This study concluded that the priming effect in petri dish demonstrate those in container in the field condition of Ghana in 10% and 15% soil moisture condition during seedling stage.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2156-2159
• /
• 2005

ADS(Address Display Period Separation) driving method has been considered to be the most appropriate driving technique for AC PDP. ADS driving method is composed of reset, address, sustain and erase period. Therefore, a long time should be allocated to an address period, which results in a reduction of brightness. To realize a high luminance and high picture quality, it is necessary to high speed addressing. However, address discharge time lag increases as the temperature decreases, which can cause the misfiring and low picture quality In this paper, the electric field effect and priming particle effect are investigated in order to reduce the address discharge time lag at low temperature. Address discharge time lag was reduced effectively when the priming particles are provided.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2003

The purposes of this study were to examine effect by Solid Matrix Priming(SMP) ; method far enhanced rapid and uniform seedling emergence in tobacco seeds. The results were as follows. No enhancement of germination rate was by SMP treatment. In KF114 during 9 days treatment and in KB108 during 7 days treatment, germinative energy was highest, and T50 and mean germination time were the shortest. Cells in embryo and hypocotyl were divided and extended during SMP treatment. The contents of fatty acid were increased in SMP treatment. The changes of glucose content were little.