• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.2
• /
• pp.93-119
• /
• 2013

The actual time fathers spend in childcare has not increased much in spite of recent attention paid to nurturing their children and changes in the fathers' role. In this study, parenting time is measured by time spent in childcare, shared housework, and shared leisure. In this way, this study seeks to analyze trends in fathers' time spent with children and the factors that influence fathers' participation in parenting. The data source for this study was the 2009 Korean Time Use Survey. The main results of this research are as follows: First, when measuring childcare time as a primary activity, fathers' time spent in parenting averaged 17 minutes on weekdays and 32 minutes on Sundays. This extended to 44 minutes on weekdays and 166 minutes on Sundays when including the secondary childcare time and the shared time with their children while doing housework or leisure. Second, fathers' probability of participating in childcare was higher for fathers who had shorter working hours, younger children, higher spouse average monthly income, and a college or higher education level. The variable that influenced fathers' participation in shared housework on weekdays was working hours. On Sundays, the variables were working hours, age of the youngest child, and the type of occupation. Fathers' participation in shared leisure was influenced by father's working hours, number of children, age of the youngest child, and type of occupation on weekdays. On Sundays, it was influenced by working hours and the age of the youngest child.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.131-140
• /
• 2005

To investigate secondary carbonaceous species within PM$_{10}$ and PM$_{2.5}$ in Seoul urban Metropolitan Area (SMA), Korea. atmospheric particulate matters samples were collected at two sites of SMA at UOS (The University Of Seoul station) sites and IHU (InHa University of Incheon station) during the period of 4 to 14 January and 12 to 22 May, 11 to 15 August 2004, and their characteristics were qualitatively discussed. during January and May and August of 2004. Daily average mass concentration 0.095 mg/㎥ in PM$_{10}$ and 0.053 mg/㎥ in PM$_{2.5}$ for mass respectively. were observed in SMA. The concentrations of carbonaceous species contributed 18.4% and 16.4% of PM$_{2.5}$ and PM$_{10}$ during the sampling period, respectively, of which OC accounted for 68% and 52% more of the total carbon (TC). OC and EC concentrations and their mass percentages were higher in PM$_{2.5}$ than in PM$_{10}$ which could be attributed to generation process. Organic aerosols would constitute up to 38% of PM$_{2.5}$ based on the evaluation of 1.6 for the ratio of OC to organic particulate. Secondary organic carbon (SOC) were estimated to be more than 13% and up to 68% of total OC based on the minimum OC/EC ratio of 1.06/1.11 using least square method. Comparisons of OC and EC with trace elements. As results of carbonaceous species analysis, the dominant factor in view of fine particle (PM$_{10}$/PM$_{2.5}$) is primary emission source such as mobile, fossil fuel combustion etc. during winter time in SMA. But in summer periods, remarkable fine particle increasing factor was secondary organic carbon dependent to photochemical reaction. reaction.n. reaction.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.429-429
• /
• 2002

This study examines the influence of long-range transport of dust particles and air pollutants on photochemistry of OH and NO$_3$ at Jeju Island (33.17$^{\circ}$ N, 126.10$^{\circ}$ E) during the Asian dust-storm (ADS) period in April 2001. The atmospheric concentrations of criteria pollutants (O$_3$, NO$_2$, CO) and sulfur species were measured at a ground station on Jeju Island, Korea as part of the ACE-Asia intensive operation. Three ADS events were observed during the periods of 10-12, 13-14, and 25-26 April, respectively. The concentrations of the criteria pollutants (i.e., $O_3$, NO$_2$, and SO$_2$) were not significantly different from those during the non-Asian-dust-storm (NADS) period. Average OH and NO$_3$ levels at Jeju Island during the study period (ADS and NADS) were estimated to be 4-10 $\times$ 10$^{5}$ moleculescm$^{-3}$ and 2-4 pptv, respectively. Two main sources of OH radical were the primary production from the reaction of water vapor ($H_2O$) and O(1D) radicals and the reaction of HO$_2$ with NO. CO was a dominant sink of OH during the ADS period: whereas NO$_2$ was the most important during the NADS period. for NO$_3$ radical, a reaction of NO$_2$ with $O_3$ was the most important atmospheric source; while $N_2$O$_{5}$ uptake on dust particles was the most dominant sink during the ADS period.

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.5
• /
• pp.373-378
• /
• 2009

Cerebellar Purkinje cells (PCs) play a crucial role in motor functions and their progressive degeneration is closely associated with spinocerebellar ataxias. Although immunohistochemical (IHC) analysis can provide a valuable tool for understanding the pathophysiology of PC disorders, the method validation of IHC analysis with cerebellar tissue specimens is unclear. Here we present an optimized and validated IHC method using antibodies to calbindin D28k, a specific PC marker in the cerebellum. To achieve the desired sensitivity, specificity, and reproducibility, we modified IHC analysis procedures for cerebellar tissues. We found that the sensitivity of staining varies depending on the commercial source of primary antibody. In addition, we showed that a biotin-free signal amplification method using a horseradish peroxidase polymer-conjugated secondary antibody increases both the sensitivity and specificity of ICH analysis. Furthermore, we demonstrated that dye filtration using a $0.22\;{\mu}m$ filter eliminates or minimizes nonspecific staining while preserving the analytical sensitivity. These results suggest that our protocol can be adapted for future investigations aiming to understand the pathophysiology of cerebellar PC disorders and to evaluate the efficacy of therapeutic strategies for treating' these diseases.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.498-501
• /
• 1998

It was determined whether photostimulated luminescence (PSL) is applicable to the detection of post-irradiation of foods by measuring PSL photon counts for unirradiated and irradiated pepper powder, dried herbs, fresh shrimp, potato, soybean, dried fig, chestnut, dried squid, and dried cod. The samples were irradiated with $^{60}Co\;{\gamma}-ray$ source and PSL photon counts were measured for them. The photon counts of unirradiated samples were lower than 2,000 for potatoes and less than 1,000 for the others. The photon counts of the irradiated samples except dried figs (0.5 kGy), chestnuts (0.2 kGy), and dried squid (0.5 kGy) were higher than 1,000, and the photon counts increased with dose. Thus, PSL might be applied to the primary detection of irradiated foods.

• Archives of Pharmacal Research
• /
• v.22 no.4
• /
• pp.340-347
• /
• 1999

Dendritic cells (DCs) are potent professional antigen-presenting cells (APC) capable of inducing the primary T cell response to antigen. Although tumor cells express target antigens, they are incapable of stimulating a tumor-specific immune response due to a defect in the costimulatory signal that is required for optimal activation of T cells. In this work, we describe a new approach using tumor-DC coculture to improve the antigen presenting capacity of tumor cells which does not require a source of tumor-associated antigen. Immunization of a weakly immunogenic and progressive tumor cocultured with none marrow-derived DCs generated an effective tumor vaccine. Immunization with the cocutured DCs was able to induce complete protectiv immunity against tumor challenges and was effective for the induction of tumor-specific CTL (cytotoxic T lymphocyte) activity. Furthermore, high NK cell activity was observed in mice in which tumors were rejected. In addition, immunization with tumor-pulsed DC s induced delayed tumor growth, but not tumor eradication in tumor-bearing mice. Our results demonstrate that coculture of DCs with tumors generated antitumor immunity due to the NK cell activation as well as tumor-specific T cell. This approach would be used for designing tumor vaccines using DCs when the information about tumor antigens is limited.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.591-597
• /
• 2016

Research question and method play important roles in conducting a research in a scientifically valid way. In today's digitalized research environment, social network service (SNS) has rapidly become a new source of big data. While this shift provides new challenges for researchers in Korea, there is little scholarly discussion of how research questions can be framed and what statistical methods can be applied. This article suggests some basic but primary types of example questions for researchers employing social big data analytics. Further, we illustrate the interface of the intended data set specifically for SNS-mediated communication and information exchange behaviors. Lastly, a statistical test known as proper method for social big data is introduced.

• The Research Journal of the Costume Culture
• /
• v.7 no.4
• /
• pp.52-68
• /
• 1999

The purpose of this study was to be inquired inner contemplation of the tattoo expressed in the modern costumes. For this study, related documentaries and pictures or photos were analyzed in terms of the theretical background for the history of tattoo, the relation between tattoo and the modern western costumes. The primary source of pictures or photos are Vogue, Collections, Collezioni, Harper\`s Bazaar, Modain, Model et Mode etc. The human\`s needs of body decoration had constantly pursued on the body and costumes from the first until lately. Especially in the recents, as the tattoo is implicated a dynamic and charming method of all kinds of body decoration, it\`s used a motive of modern western costumes. The original tattoo means a picture, word etc. that was put permanently onto their skin using a needle and coloring matter. But, these days tattoo is an expression of street style for something new in the subculture. The results were as a follows : The inner meaning of tattoo represented in the modern costumes was classified into two categories. First, the tattooing was a very important factor to complete fashion design through the history of modern costumes, and also the elaborate tattoo of the body was displayed unrestricted formativeness as the skinhead\`s tattoo, raceless\`s ambiguity of street style and artistic decoration, because that can be faded easily. Second, Tattoo Look was expressed as tattoo prints of the see-through, elastic textiles in the modern costumes. That is, the tattoo enhanced the effect of dramatic atmosphere other formative arts as well as the modern costumes by Tattoo Look. Similarity, Tattoo Look could be interpreted as the change of the aesthetic consciousness by the influence of the subculture. Accordingly, in the end of a this century, many experimental designers had applied tattoo to modern costumes. So this study will stand as an important clue to foresee the future costume\`s style and change.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.1
• /
• pp.15-23
• /
• 2009

Over about 30% of problems in construction is related to water-leaking, and the loss from this problem can incur as much as three times the cost of initial construction. Thus, water vapor pressure is known to be the primary cause of defective waterproofing. Accordingly, the theories on the relationship between water pressure and temperature as well as damp-proofing volume of concrete and the change in vapor pressure volume were reviewed and analyzed in this study by making test samples after spraying a dampness remover and applying waterproofing materials to the prepared test specimens. The result of measuring water vapor pressure with the surface temperature of the waterproofing (fluid-applied membrane) layer at the experimental temperature setting of about $10^{\circ}C$, which is the annual average temperature of Seoul, indicated that (1) the temperature of the fluid-applied membrane elevated to about $40^{\circ}C$, and the water vapor pressure generated from the fluid-applied membrane was about 0.03 N/mm 2 when the surface temperature of the waterproofing layer was raised to about $80^{\circ}C$. (2) when the temperature of the fluid-applied membrane of the waterproofing layer was raised from $30^{\circ}C$ to $35^{\circ}C$, water vapor pressure of about 0.01 N/mm 2 was generated, and (3) when a thermal source was applied to the fluid-applied membrane (waterproofing) layer, the temperature increased from $35^{\circ}C$ to $40^{\circ}C$, and approximately $0.005\;N/mm^2$ of water vapor pressure was generated.