• Applied Microscopy
• /
• 제32권1호
• /
• pp.31-37
• /
• 2002

[ $Mg_{68}Zn_{28}Y_4$ ] 합금의 응고 조직은 primary solidification phase, primary solidification phase로부터 성장된 ${\alpha}-Mg$ dendrite, 그리고 응고 말기에 형성된 eutectic structure의 세 가지형태 조직으로 구성되어져 있다. Primary solidification phase에는 매우 큰 정도의 phason strain이 존재하고 있으며, $a=27.2{\AA}\;and\;{\alpha}=63.43^{\circ}$의 격자상수를 갖는 1/1 rhombohedral approximant가 존재한다. 이와 같은 rhombohedral approximant의 구조는 six dimensional face centered hyper-cubic lattice에 phason strain을 도입함에 의해 얻어질 수 있다. Decagonal phase는 icosahedral phase로부터 방위 관계를 가지며 형성되며, $Mg_4Zn_7$는 decagonal phase로부터 방위관계를 가지며 성장한다. 이는 세 상간에 구조적 유사성이 존재하고 있음을 의미하며, 응고시 용질원자의 분배에 의해 이들 세 상이 순서대로 형성되어진다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.198-207
• /
• 1998

To determine the effect of temperature and microstructure on the fatigue crack propagation behavior in Ti-3Al-2.5V alloy, experimental investigations have been carried out with the specimens of different temperatures and different volume fractions of prime $\alpha$-phase. The temperatures employed were room temperature, 20$0^{\circ}C$, 30$0^{\circ}C$ and 40$0^{\circ}C$ under the same frequency of 20Hz. To obtain the different volume fractions of the primary $\alpha$-phase, specimens were solution-treated at $\alpha$+$\beta$ and above the $\beta$ region. From the experimental results, following conclusions were obtained. (1) ΔKth was observed to increase with the less volume fraction of the primary $\alpha$-phase. (2) As the temperature increased. (3) Microstructures having more primary $\alpha$-phase showed higher strength at the high temperatures.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.361-367
• /
• 1997

The phase separation in ferrite phase of duplex stainless steel is the primary cause of thermal aging embrittlement of the LWR primary pressure boundary components. In this study the phase separation of simulated duplex stainless steel was detected by Mossbauer spectroscopy and magnetic property analysis by VSM(Vibrating Specimen Magnetometer). The simulated duplex stainless steels, Fe-Cr binary, Fe-Cr-Ni ternary, and Fe-Cr-Ni-Si quarternary allots, were aged at 370 and 40$0^{\circ}C$ up to 5,340 hours. It was observed from Mossbauer spectra analysis that internal magnetic field increases with aging time and from VSM that the specific saturation magnetization and Curie temperature increase with aging time. These result are indicative that phase separation into Fe-rich region and Cr-rich region is caused by thermal aging in the temperature range of 370~40$0^{\circ}C$ In cases of specimens containing Ni, the increase of specific saturation magnetization is much higher. This implies that Ni seems to promote Fe-Cr interdiffusion, which accelerates the phase separation into Fe-rich $\alpha$ phase and Cr-rich $\alpha$' phase.

• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.20-24
• /
• 2015

We studied the relationship between the surface smoothness of the internal Cu ribbon and the morphology of the Sn-Pb plating layer for solar cell modules. A bumpy surface was observed on the surface of the solar ribbon, which caused irregular reflection of light. Large, Pb-rich, primary ${\alpha}$-phases were found below the convex surface of the solar ribbon, passing from the surface of the internal Cu ribbon to the surface of the plating layer. The primary ${\alpha}$-phases heterogeneously nucleated on the convex surface of the Cu ribbon, and then largely grew to the convex surface of the plating layer. The restriction of the primary ${\alpha}$-phase's formation was enabled by enhancing the smoothness of the Cu ribbon's surface; it was also possible to increase the adhesive strength and decrease contact resistance. We confirmed that the solar ribbon's surface smoothness depends on the internal Cu ribbon's surface smoothness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.150-153
• /
• 2007

Apply electromagnetic stirring system to making rheology slurry of Al7075. This experiment has important element which is the relation between solid fraction percent and melt temperature of Al7075. The rheology slurry of Al7075 eliminated liquid phase to include alloying element of copper and zinc by squeeze casting process. In result the most structure was composed entirely of globular primary $\alpha$. Used this material for this study. This study made a comparison of mechanical property according to heat treatment T6 at each melt temperature ($619^{\circ}C$ and $615^{\circ}C$). The microstructure and component are observed how heat treatment T6 weight with the mechanical property by SEM-EDS.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.958-966
• /
• 2001

This study has examined the microstructural development in the Bridgman type directional solidification of hyper-peritectic Sn-Cd alloys, and the temperature and flow field have been numerically simulated to see if there is any change induced by convection. The directional solidification experiments carried out in quartz tubes with inside diameters of 0.4∼6mm showed that the resulting microstructures are clearly dependent on the size of tube diameters. The bigger ampoules where the effect of convection is highly expected produced saw-like structures resulting from the primary $\alpha$ and peritectic $\beta$ phase growing together at a planar solid-liquid front, with the former being surrounded by the latter. In the smaller ampoules, where the effect of convection is expected low however, the saw structure disappears, and as is understood from the theoretical prediction based on diffusion-controlled solidification the initial growth of the primary $\alpha$ phase is replaced by the nucleation of the peritectic $\beta$ phase whose growth continues to the end of the solidification.

• 대한수의학회지
• /
• 제33권4호
• /
• pp.611-615
• /
• 1993

젖소에서 progesterone과 testosterone의 측정을 위하여 solid phase 효소면역분석법(酵素免疫分析法)를 개발하였다. 1차 항체로서 $11{\alpha}$-hemisuccinate-progesterone bovine serum albumin과 4-androsten-$17\;{\beta}$-ol-3-one-carboxymethyloxime bovine serum albumin에 대한 토끼 혈청(血淸)을 각각 항혈청(抗血淸)으로 사용하였고, 2차 항체로서 면약 IgG를 사용하였다. Conjugates로서는 각각 progesterone-$11\;{\alpha}$-hydroxy-hemisuccinate-horseradish peroxidase와 4-androsten-$17\;{\beta}$-ol-3-hemisuccinate-horseradish peroxidase를 사용하였다. Progesterone과 testosterone에 대한 최저측정치(最低測定値)는 각각 6.7 pg/well과 1.0 pg/well이었다.

• 한국인터넷방송통신학회논문지
• /
• 제13권6호
• /
• pp.101-108
• /
• 2013

본 논문에서는, NACK 메시지가 스펙트럼 공유와 협력을 위한 명령으로 사용되어지는 방법을 제안하였다. 1차 사용자의 직접 연결이 중단될 때, 협력과 공유의 자동 반복을 허가하고, 패러다임 기반의 협력 스펙트럼 공유의 조정 메시지의 수를 절약하기 위해 허가한다. 공유 시, ${\alpha}$의 남은 전력 부분이 1차 재전송 신호인 동안, 2차 전송된 신호를 위한 $1-{\alpha}$ 전력 부분은 중계기 공유로 선택된다. 중계기를 사용하지 않는 경우, 1차 송신단은 전체 전력($1-{\alpha}$)를 사용하여 신호를 재전송 하기 위해 NACK를 사용한다. 두 시스템은 BPSK 신호를 적용한 것으로 가정한다. 이 기법에서, 2차 사용자는 공동 최적화 복호를 하는 것으로 제안한다. 프레임 오류율(FER) 성능은 양 시스템에서 분석된다. 이론과 시뮬레이션 결과는 본 프로토콜의 유효성을 분석하고 효율적임을 확인하였다.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.225-232
• /
• 2009

For comprehensive understanding of the formation behavior of $\beta-Al_5FeSi$ phase in Al-Si-Cu alloys with the existence of Fe element, microstructure characterizations were performed using combined analysis of OM, SEM-EDS, XRD. Especially, experimental and predictive works on solidification events of $\beta-Al_5FeSi$ phase as well as other phases formed together with $\beta-Al_5FeSi$ have been carried out by using DSC analysis and Java-based Materials Properties software (J. Mat. Pro.). Primary and eutectic $\beta-Al_5FeSi$ phases were able to distinguish from each other on microstructures by their morphological features. Primary $\beta-Al_5FeSi$ phase was seen to have rough surface perpendicular to growth direction, indicating free attachment of solute atoms in liquid state. On the other hand, the eutectic $\beta-Al_5FeSi$ phase was formed with plain and straight surface during eutectic reaction together with $\alpha$-Al phase. The eutectic reaction of $\beta-Al_5FeSi$ and $\alpha$-Al phases was seen to be able to separate into each formation depending on cooling rate.

• 한국재료학회지
• /
• 제7권12호
• /
• pp.1063-1069
• /
• 1997

급속응고법으로 Fe-Nd-C 합금을 제조하여 합금의 조성 및 제조 조건의 변화에 따른 상변화와 자기특성의 변화를 조사하였다. 강자성 $Fe_{14}Nd_2C_x$가 초정으로 정출할 수 있는지를 알아보기 위하여 냉각속도의 변화에 따른 as-spun 합금에서의 상변화를 조사해 본 결과，10m/s로 제조한 Fe-Nd-C 리본합금은 ${\alphs}-Fe$가 일차상, $Fe_{17}Nd_2C_x$가 이차상으로 존재하는 결정질이었으며. 20m/s에서는 ${\alpha}-Fe$의 정출이 억제되거나 비정질화하여, $Fe_{14}Nd_2C_x$가 일차상, ${\alpha}-Fe$가 이차상으로서 비정질상과 함께 존재하였다. 냉각속도의 증가에 따라 비정질화가 증가하여 30m/s에서는 대부분 비정질화되었으며，40m/s에서 비정질화가 완료되었다. 따라서 $Fe_{14}Nd_2C$는 as-spun 상태에서는 얻어지지 않고 주조합금의 경우와 마찬가지로 열처리를 통한 고상변태에 의해서만 얻을 수 있었다. $Fe_{14}Nd_2C$를 얻을 수 있는 유효온도구역은 주조합금의 경우보다 넓은 $700{\sim}900^{\circ}C$였고，비정질화가 완벽한 합금보다 다소 덜 완벽하거나 $Fe_{17}Nd_2C_x$와 비정질상이 혼합된 합금에서 열처리에 의한 보자력의 향상이 더욱 현저하였다. Fe를 다량 함유한 Fe-Nd-C 조성 중에서 높은 보자력이 기대되는 조성 범위는 극히 제한되어, $750{\sim}800^{\circ}C$에서 몇 분간의 열처리로 10kOe 이상의 높은 보자력을 얻을 수 있는 조성은 77~78 Fe, 7~8 C (at.%) 정도였다.