• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• Food Science and Preservation
• /
• v.12 no.4
• /
• pp.305-309
• /
• 2005

To investigate the effects of cinnamon extracts pretreatment and packaging on the quality of dried persimmon. Dried persimmon were storaged during 100 days at room temperature($15^{\circ}C$) after dipping in cinnamon extracts and then packaging with LDPE(low density polyethylene) and Nylon/LDPE pouch Weight loss of dried persimmon treated with K-V was maintained $20.2\%$ lower than control. Firmness was $87\%$, browning was $56\%$ lower. Skin color change was 0.80 point, which was the lowest changes comparing with others. As a result, dipping in cinnamon extracts and packaging Nylon/LDPE film were good for maintaining dried qualities.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.98-103
• /
• 2011

Photocatalysis using UV light and catalysts is an attractive low temperature and non-energy- intensive method for remediation of a wide range of chemical contaminants like chloroform (CF). Recently development of environmental friendly and sustainable catalytic systems is needed before such catalysts can be routinely applied to large-scale remediation or drinking water treatment. Titanium dioxide is a candidate material, since it is stable, highly reactive, and inexpensive. Diatoms are photosynthetic, single-celled algae that make a microscale silica shell with nano scale features. These diatoms have an ability to biologically fabricate $TiO_2$ nanoparticles into this shell in a process that parallels nanoscale silica mineralization. We cultivated diatoms, metabolically deposited titanium into the shell by using a two-stage photobioreactor and used this biogenic $TiO_2$ to this study. In this study we evaluated how effectively biogenic $TiO_2$ nanoparticles transform CF compared with chemically-synthesized $TiO_2$ nanoparticlesthe and effect of pretreatment of diatom-produced $TiO_2$ nanoparticles on photocatalytic transformation of CF. The rate of CF transformation by diatom-$TiO_2$ particles is a factor of 3 slower than chemically-synthesized one and chloride ion production was also co-related with CF transformation, and 79~91% of CF mineralization was observed in two $TiO_2$ particles. And the period of sonication and mass transfer due to particle size, evaluated by difference of oxygen tention does not affect on the CF transformation. Based on the XRD analysis we conclude that slower CF transformation by diatom-$TiO_2$ might be due to incomplete annealing to the anatase form.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.323-327
• /
• 2011

A zeolite sheet (ceramic paper containing zeolite) made in a cylindrical configuration can be applied to a honeycomb rotor for the effective VOC removal. In this study, the zeolite sheet containing ZSM-5 was used as a support for Pt-loading, and its catalytic activity for the toluene combustion reaction was compared with those of the other Pt catalysts loaded on ${\gamma}-Al_2O_3$ and cordierite honeycomb. Pt/zeolite sheet catalyst showed a higher activity for toluene combustion reaction than that of $Pt/{\gamma}-Al_2O_3$ or Pt/cordierite honeycomb. On the other hand, the dispersion of Pt particles loaded on the zeolite sheet was improved by the pretreatment with $NH_3-H_2O$ vapor at room temperature. Consequently, the pretreatment of Pt/zeolite sheet by $NH_3-H_2O$ vapor significantly enhanced the catalytic activation for toluene combustion reaction.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.6
• /
• pp.555-563
• /
• 2022

The purpose of this study was to confirm the quality characteristics of distilled soju with different rice pretreatment processes. The non-steamed fermentation method is a technology that uses starch to produce saccharification and alcohol without going through the steaming of raw materials. It has advantages such as reduction of manpower and cost, prevention of nutrient loss, and minimization of waste water. In this study, rice used were non-steamed and pulverized 'Baromi2', nonsteamed and steamed 'Samgwang', and puffed rice. As the fermenting agent, koji, modified nuruk, N9 yeast, and purified enzyme were used, and lactic acid was added to prevent contamination during fermentation. The amount of water was 300% in total, and after the first watering, 5 days after fermentation, the second watering was carried out. As a result of the study, it was confirmed that the non-steamed fermentation method using 'Baromi' was superior to the existing fermentation method in terms of temperature during fermentation, final alcohol content, soluble solids, and pH. By expanding the stability of the production technology of non-steamed fermentation technology, product quality improvement can be expected.

• Nuclear Engineering and Technology
• /
• v.7 no.3
• /
• pp.213-222
• /
• 1975

Immobilization of the second-cycle radioactive liquid wastes from a Purex process was developed with the blown asphalt (manufactured by Kukdong Shell Oil Company Ltd) to eliminate the possibility that the radioactive materials will be redispersed into the environment. Attempts to incorporate these wastes directly into the asphalt martrices without any pretreatment were not successful, as it was observed that the sulphuric acid in the waste oxidised the asphalt. Hence, the waste was treated with caustic soda and made alkaline prior to bituminization, so that it was found that this pretreatment made the waste compatible to the asphalt matrices. The pure blown asphalt samples irradiated with doses of 4.0$\times$10$^{7}$ rad showed no evidence of volume increase. The suitable temperature for incorporation of the alkaline wastes into blown asphalt was 180-20$0^{\circ}C$. The Products containing 50 wt% salts represented the following good properties viz., volume reduction (about 1.4), homogeneity, teachability etc. During the period of 131 day $s^{l37}$Cs from products containing 40wt% salts was leached at rates ranging from 2.70$\times$10-4 to 8.27$\times$10-4g/cm2_day but the rate for $^{90}$ Sr was lower by one to two orders of magnitude by distilled water. The leaching rates for $^{137}$ Cs and $^{90}$ Sr by sea water were slightly lower than by distilled water. Both of the leaching rates decreased with increasing pH.H.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.157-164
• /
• 2009

Background: Various studies and experimental trials have been done to develop bioprosthetic devices to treat complex congenital heart disease due to the limited usage of homograft tissue. The purpose of the present study was to evaluate the effect of diamine bridges with using L-lysine, as compared with using ethanol. Material and Method: Porcine pericardium was fixed at 0.625% GA (commercial fixation). An interim step of ethanol (80%; 1 day at room temperature) or L-lysine (0.1 M; 2 days at $37^{\circ}C$) was followed by completion of the GA fixation (2 days at $4^{\circ}C$ and 7 days at room temperature). The tensile strength and thickness of the porcine percardium were measured, respectively. The treated pericardiums were implanted subcutaneously into three-week old Long-Evans rats for 8 weeks. The calcium content of the implants was assessed by atomic absorption spectroscopy and the histology. Result: Ethanol pretreatment ($13.6{\pm}10.0ug/mg$, p=0.008), L-lysine pretreatment ($15.3{\pm}1.0 ug/mg$, p=0.002), and both treatment ($16.1{\pm}11.1ug/mg$, p=0.012) significantly inhibited calcification, as compared with the controls $(51.2{\pm}8.5ug/mg)$. L-lysine pretreatment ($0.18{\pm}0.02mm,\;1.20{\pm}0.30kg$ f/5 mm) significantly increased the thickness and tensile strength, as compared with ethanol pretreatment ($0.13{\pm}0.03mm,\;0.85{\pm}0.36$ 1.0 kg f/5 mm) (p<0.01, p=0.035). Conclusion: The diamine bridges using L-lysine seemed to decrease the calcification of porcine pericardium fixed with glutaraldehyde, and this was comparable with Ethanol. Additionally, it seemed to enhance the thickness and tensile strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.86-94
• /
• 1999

Alkaline peroxide bleaching of chemi-mechanical pulp is a very complicated system where various process factors affect the bleacing performance and pulp properties. Traditional onefactor-at a time method is ineffective and costly infinding the optimal bleaching conditions. In this study, statistical experimental design and multiple regression method wre used to investigated the interactions among various bleaching factors and to find out the possbile maximal brightness development during one stage alkaline peroxide bleacing of TMP. The TMP was made from 10% Korean red pine and 90% Korean spruce and had an initial brightness of 54.5% ISO. the TMP was pretreated with EDTA(0.5% on O.D. pulp, 3% pulp consistency, 30$^{\circ}C$ for 60 minutes) and bleached in a 2 L Mark V Quantum Reactor at 750 rmp, 7.5% of bleaching consistency and with 0.05% magnesium sulfate addition. The ranges of chemical factors studied , based on oven-ried pulp, were 1-5% for hydrogen peroxide, 1-4% for sodium hydroxide and 1-4% for sodium silicate. The rages of reaction temperature and time were 50-90$^{\circ}C$ and 40-180minutes respectively. Interactions of hydrogen peroxide with alkali , time with temperature ature, alkali with time and silicate with temperature were found to be significant which means that hydrogen peroxide bleaching will be favored at stable concentration of perhydroxyl ion, relatively short time and low temperature, and high level of silicate. Mathematical model which has good predictability for target brightness in one stage peroxide bleaching can also be established easily. Base ion the model, maximal brightness of 70% ISO was found to at 50$^{\circ}C$ and 50 minutes by chemical additions of 5% for hydrogen peroxide, 3.2-3.4% for sodium hydroxide and 4% for silicate based on O.D. pulp. However, this result might not be suitable for situation where furnishes are different from ours, or different pretreatment is used, or bleaching carried out at different pulp consistency. In these cases it will be good to re-investigate the process by a similar methodology as was used in this study.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.124-130
• /
• 1998

It failed occasionally to take a reasonable emergence rate since tobacco (Nicotiana tabacum L.) seeds were planted on late Jan. showing lowest temperature. This experiment was done to measure the effect of GA3 (concentration ; period) , light quality (red ; white ; dark) during or after its treatment, daily irradiation hours( 0 ; 8 ; 12 ;16) and germination termperature (20 or 10 $^{\circ}C$ ocnstant ; 20/1$0^{\circ}C$ alternating) on the germination rate. Red and white light given during grmination showed no differences between the other daily irradiation hours except that 8 hours red light delayed germination although their 12 hours irradiation had the gratest rate. The rate was increased with increased concentration to GA3 0.01 mM or increased imbibition period to 3 days although the rate of cv. NC 82 was less than that of cv. Burley 21 in the case of dark imbibition of GA3 but daily 12 hours irradiation during germination. Light quality forced during GA3 imbibition eliminated such effect of GA3 shown in the darkness so that only light quality pretreatment and termperature during germinition were affected on the rate. The germination rate of thecultivars was decreased in the order of red, white light, darkness meaning that it was highly influenced by the light quality during GA3 treatment. Regardless of GA3 or light quality treatment,on the other hand, the rate was greater in 20 $^{\circ}C$ constat than 1$0^{\circ}C$ constant and 20/1$0^{\circ}C$ alternating germination temperature having similar germinative patterns.