• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.415-416
• /
• 2010

최근 석유수급에 대한 불안함이 증가되고 있으며 그로 인해 천연가스의 개발과 사용범위가 확대되고 있다. 특히, 전 세계적으로 조선에서는 LNG 및 LPG와 같은 천연가스의 저장과 운반에 대한 발전이 급속도로 성장하고 있는 반면에, 국내에서는 극저온 부품소재의 기술력 저하로 극저온 버터플라이 밸브와 같은 핵심부품을 전량 수입에 의존하고 있는 실정이다. LNG 및 LPG 둥은 미래 핵심 천연연료로 많은 지지를 얻고 있고 사용빈도도 증가하고 있기 때문에 이와 관련된 기술이 발전되어야 함은 물론이고, 국내에서도 극저온 버터플라이 밸브 제작과 설계에 대한 핵심기술을 확보하여야 한다. 이러한 관점에서 본 논문에서는 극저온 환경 하에서 우수한 신뢰성과 안전성이 보장될 수 있는 원주가압형 극저온 버터플라이 밸브를 유동-구조 연성해석을 이용하여 밸브 가압 길이에 따른 강도 평가를 수행하였다.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.1-10
• /
• 2006

본 논문에서는 극저온 추진제 탱크가 가스 헬륨(GHe) 버블링에 의해 가압될 때 극저온 추진제의 열역학 변수들에 대한 계산 방법을 제시하였다. 헬륨 분사를 이용한 액체 산소(LOX)와 액체 수소($LH_2$) 탱크의 가압 과정에서의 극저온 추진제 온도와 추진제로 용해되는 가스 헬륨의 질량을 분석하였다. 해석 결과를 통해 헬륨 버블링이 LOX와 $LH_2$의 열역학적 변수들에 어떻게 영향을 주는지 확인하였다. 제시된 계산 방법을 통해 가압 시스템으로써 헬륨 버블링의 실현 가능성과 헬륨 버블링을 이용한 가압 시스템의 최적화가 가능할 것이다.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.79-84
• /
• 2012

창이 있고 밀폐되어있는 시험챔버를 사용하여 고속가압에 의한 고체추진제의 균열진전시험을 수행하였다. 고체추진제 예균열 시험편은 시험챔버내에 설치되고, 축압기 내에 고압으로 축적된 질소가스는 고속가압을 위해 가압밸브를 통해 시험챔버를 가압한다. 시험챔버 내의 압력이 설정압력에 도달하게 되면 가압밸브는 닫히고 배기밸브를 통해 시험챔버는 감압이 된다. 본 논문에서는 시험결과로부터 시간에 따른 시험챔버압력을 나타내는 압력-시간 선도를 얻었으며, 선도로부터 가압비(${\Delta}P/{\Delta}t$)를 계산하였다. 3가지 가압비 64.34, 73.86, 85.44 MPa/s 에 대한 시험을 수행하였으며, 가압비에 따른 균열진전 길이를 측정하였다. 또한 고속 디지털카메라촬영을 통해 균열진전과정을 분석하였다.

• 한국축산식품학회지
• /
• 제28권4호
• /
• pp.415-421
• /
• 2008

This study evaluated the effects of thermal processing combined with high pressure on the properties of cooked pork. Pressurization followed by heating (PFH), heating followed by pressurization (HFP) and heating under pressurization (HUP) treatments were compared to a heated only control. Cooked meat without simultaneous pressurization showed little or no decrease in water binding properties relative to the control, regardless of the sequence of pressurization and heating. However, HUP treated pork had significantly higher water binding properties than the control (p<0.05). The pH values of all treatments were not significantly different with the exception of HUP at 300 MPa. The HUP treated pork showed the best tenderizing effects among all the treatments tested and the effect was more significant at increased pressure levels (p<0.05). In addition, increasing pressure levels significantly increased the L-values of pork (p<0.05). PFH and HFP treated pork had significantly lower a-values (p<0.05), while no significant differences were observed in HUP. HUP treated pork had the lowest b-values at 100 MPa. however, the differences were not significant at increasing pressure levels. These results indicate that heating under pressure is the best cooking condition for improving the quality characteristics of pork without adversely affecting its appearance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.539-544
• /
• 2012

창이 있고 밀폐되어있는 시험챔버를 사용하여 고속압력하중부가에 의한 고체추진제의 균열진전시험을 수행하였다. 고체추진제 예균열 시험편은 시험챔버내에 설치되고, 고속압력하중을 부가하기 위해 어큐뮬레이터 내에 고압으로 축적된 질소가스를 가압밸브를 통해 시험챔버 내에 가압하였으며, 시험챔버내의 압력이 설정압력에 도달하게 되면 가압밸브는 닫히고 배기밸브를 통해 시험챔버는 감압이된다. 시험결과로부터 시간에 따른 시험챔버압력을 나타내는 압력-시간 선도를 얻었으며, 선도로부터 가압비(${\Delta}P/{\Delta}t$)를 계산하였다. 3가지 가압비 64.34, 73.86, 85.44 MPa/s 에 대한 시험을 수행하였으며, 가압비에 따른 균열진전길이가 측정되었다. 또한 고속 디지털카메라촬영을 통해 균열진전과정을 분석하였다.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.961-967
• /
• 2009

A 3-dimensional numerical investigation of a WIG effect vehicle with DUP (direct underside pressurization) is performed to predict aerodynamic characteristics and the static height stability. DUP can considerably reduce take-off speed and minimize the hump drag while the vehicle accelerates on the water to take off. The DUP of the model vehicle, Aircat, consists of a propeller in the middle of the fuselage and an air chamber under the fuselage. The air accelerated by the propeller comes into the camber through the channel in the middle of fuselage and augments lift by changing its dynamic pressure to static pressure dramatically. However, the air accelerated by a propeller produces excessive drag and reduces static height stability.

• 반도체디스플레이기술학회지
• /
• 제12권4호
• /
• pp.15-20
• /
• 2013

Nanoimprint lithography (NIL) is the next generation photolithography process in which the photoresist is dispensed onto the substrate in its liquid form and then imprinted and cured into a desired pattern instead of using traditional optical system. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. In this paper, a pressure vessel type imprinting system was used to imprint patterns with two type pressure values (25 bar, 30 bar) and two type pressure keeping times (5 min, 10 min). The height of transferred pattern and the thickness of residual layer were measured and effects of pressurization conditions - pressure and pressure keeping time - on the pattern transfer in thermal NIL were investigated.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권1호
• /
• pp.25-31
• /
• 2009

Supercooled type ice storage system with aqueous solution (or water) may have trouble with non-uniform release of supercooling even though it contributes to the simplicity of system and ecological improvement. The non-uniform release increases the instability of the system because it may cause an ice blockage in pipe or cooling part. In order to suppress the release of the supercooling, a cooling experiment was tried to an ethylene glycol(EG) 3 mass% solution corresponding with pressurization. Also, the frequency ratio of the release of the supercooling was measured to the pressurization from 101 to 505 kPa. At results, the frequency ratio of supercooling release tends to decrease as the pressure of the aqueous solution increased in each cooling rate. Moreover, it tends to decrease as the cooling rate of the solution decreased in each pressure.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.409-414
• /
• 2009

Since cryogens are stored at very low temperatures, the cryogenic storage systems are quite sensitive to heat leaks. Even though the vessel operated under sealed condition with vacuum insulation and reflective coatings are used, the heat leakage into the vessel is still unavoidable. Therefore, this paper concerns with numerical study of self-pressurization used to analysis the optimum design with the variation volume fraction, effect of heat flux and storage pressure of liquid nitrogen. The result shows that as the volume fraction increases, the pressure rise reduces and the relatively at atmosphere pressure is better than the higher one. In addition, higher heat flux leads the pressure rise increases faster than low one. The additional of heat pipe system to reduce the pressure rise rate also has been done. By this comparison, the optimum design for storage umbilical cord blood can be selected.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.27-32
• /
• 2013

Infiltration is air flow that occurs through cracks in buildings. According to level and kind of infiltration, the cooling load and heating load in buildings may increase. In this study I conducted field measurements to evaluate air tightness in 27 new apartment units. Field measurements for new apartments was the focus. For the de-pressurization method, the equipment utilized to gauge airtightness included KNS-5000C and KNS-4000 which were installed on the window in order to measure indoor air leakage. The results are summarized as follows. The average ACH50 of a $59m^2$ APT was 3.98, 3.82 for a $84m^2$ APT, and 2.73 for a $114m^2$ APT. The total average ACH50 of 27units was 3.51.