• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.575-587
• /
• 2024

The contact pressure between the surrounding rock and the support is an important indicator of the surrounding rock pressure. There has been a bottleneck in the prediction of contact loads between surrounding rock and primary support in deep-buried mountain tunnels. The main reason is that a reliable method wasn't existed to quantify the contact loads. This study had been taken into account the flexible support role of the primary support, and the fitting curve of surrounding rock deformation for dynamic tunnel construction was proposed. New formulas for the calculation of contact loads between surrounding rock and primary support were obtained by inversion. Comparative analysis of the calculation results with numerical simulation verified the reliability of the calculation method in this study. It can be seen from the analyses that the contact load between surrounding rock and primary support increases, remains unchanged and decreases during acceleration, uniform velocity and deceleration, respectively, and the deformation of the surrounding rock in the acceleration and deceleration stages cannot completely converted into contact loads. The contact loads between surrounding rock and primary support of medium-strength and weak surrounding rock tunnels are generally within 150 kPa and 1 MPa, respectively. For tunnels with weak surrounding rock, advanced support can be installed to reduce the unique release coefficient λ₀ and the value of the constant D, with the purpose of reducing the contact loads between surrounding rock and primary support. Changes in support parameters have a small effect on the contact loads between surrounding rock and primary support, but increase or decrease the safety factor, resulting in a waste of resources or a situation that threatens the safety of the support. The results of this research provide guidance for the prediction of contact loads between surrounding rock and primary support for dynamic tunnel construction.

• 멤브레인
• /
• 제23권6호
• /
• pp.425-431
• /
• 2013

본 연구의 목적은 지지체의 친수화가 압력지연삼투(Pressure retarded osmosis, PRO)막의 투과특성에 미치는 영향에 대해서 알아보고자 하였다. 소수성 지지체인 폴리에스테르를 친수성 고분자인 셀룰로오스 용액을 사용하여 친수화도를 조절하였다. 지지체의 친수화 특성만을 파악하기 위해서 지지층 없이 동일한 활성층을 사용하여 PRO 막 투과 특성을 비교하였다. 사용된 활성층은 1,4-dioxane과 cellulose tri-acetate (CTA, 13 wt%)를 사용하여 제조하였으며, $5kgf/cm^2$ 압력 하에서 행한 PRO 성능 평가의 경우 투과도가 친수화된 지지체를 사용한 경우와 친수화되지 않은 경우에 각각 $1.2L/m^2hr$와 $0.8L/m^2hr$로 친수화된 지지체를 사용할 경우 약 50% 투과량이 증가되는 특성을 보였다. 그러나 셀룰로오스 농도 변화에 따른 지지체의 친수화도 증가가 투과량 변화를 가져오지는 않았다. 이는 지지체를 친수화하기 위해 사용된 셀룰로오스의 농도가 증가함에 따라 지지체의 기공이 막히는 현상에 기인한 것으로 보인다. 이러한 결과를 통해 정삼투공정에서 투과유량을 높이기 위해서는 지지체로서 친수성 소재를 사용하여 분리막을 제조함과 동시에 지지체 기공을 유지하는 것이 중요함을 확인하였다.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.136-144
• /
• 2022

Objective: This study was to identify the effect of pressure biofeedback applied in various postures that allow the application of abdominal drawing-in. Design: A cross sectional study. Methods: The study intended to compare changes in the thickness of abdominal muscles between different postures when abdominal drawing-in was performed using a pressure biofeedback unit in five postures and to compare differences in terms of measures such as the transverse abdominis's preferential activation ratio(PAR). Data measured from 30 healthy individuals were used for data analysis. A paired t-test and repeated measures analysis of variance was performed to compare the thickness of each abdominal muscle. Results: The transverse abdominis's and internal oblique's thickness showed statistically significant differences in all postures when abdominal drawing-in (p<0.05). In the comparison between the postures, statistically significant differences were observed between the positions of hook-lying and wall support standing and between supine and wall support standing and between hook-lying and sitting (p<0.05). In terms of the transverse abdominis's PAR in each posture, statistically significant differences were observed between hook-lying and quadruped, hook-lying and sitting, hook-lying and wall support standing, quadruped and supine, sitting and supine, as well as wall support standing and supine (p<0.05). Conclusions: When abdominal drawing-in using pressure biofeedback unit is performed for stabilization exercises, selecting and applying specific postures according to targeted muscles and the subject's functional ability will help provide a more efficient and accurate intervention.

• 패션비즈니스
• /
• 제25권1호
• /
• pp.39-50
• /
• 2021

The purpose of this study was to investigate how wearing calf support and applying of electronic muscle simulation(EMS) affected the ability to balance. In this study, the one leg standing test for static balance and the Y balance test for dynamic balance were used to assess balance. At this time, the pressure of the calf support was different to produce two supporters, and a difference between wearing the support before, after, and after applying EMS was evaluated. Seven men in their 20s with healthy bodies were measured five times each with a five-minute break, taking into account muscle fatigue, and the difference between each variable was analyzed through a follow-up test using nonparametric statistical analysis. Studies have shown more difference from supporter B with a more appropriate pressure (mmgh) for increasing balance capability than from supporter A. In addition, it was confirmed that the use of EMS electrostimulation and support before measuring the balance capability resulted in a greater difference. The proper pressure (mmgh) supporters and EMS can increase the ability to balance, and these results can be expected to improve the balance ability of ordinary people in their daily lives.

• 전산구조공학
• /
• 제9권3호
• /
• pp.115-123
• /
• 1996

배관을 구속시키기 위한 원통형 배관 지지대(Trunnion Pipe Support)가 부착된 배관의 응력해석을 위하여 유한요소해석을 사용하였다. 해석결과로 부터 얻어진 응력은 두께에 대한 평균(막응력) 및 선형 응력(굽힘응력)으로 분류되었으며, 분류된 응력값은 압력에 에 의한 일차응력계수(B/sub 1/)와 이차응력계수(C/sub 1/), 모멘트에 의한 일차응력계수(B/sub 28/, B/sub 2T/)와 이차응력계수(C/sub 28/, C/sub 2T/)를 추정하기 위하여 ASME Code에 정의된것과 일치하게 해석되었다. 무차원의 함수로써 응력계수에 대한 경험식을 개발하기 위하여 여러 모델의 해석을 수행하였다.

• 생물환경조절학회지
• /
• 제14권3호
• /
• pp.218-231
• /
• 2005

본고에서는 우주에서 장기간에 걸쳐 임무를 수행하는 인간의 생명지원을 목적으로 CELSS를 이용한 식물생산, 물과 공기의 정화 및 재생, 폐기물 처리 등을 위한 공학적 접근을 검토하였다. 이러한 공학적 접근에는 미소중력 또는 저압과 같은 우주 환경에 적용 가능한 폐쇄형 식물생산 시스템, 물질 순환, 물의 재생, 폐기물의 처리, 미량 유해가스의 제거, 조명, 배양액의 공급 등이 포함된다. 우주에서 재배 가능한 작물의 선택 기준으로 높은 생산성, 식용성, 소화성, 조리성, 자동화 가능성, 짧은 줄기, 높은 증산속도 등이 제기되고 있다. 화성 표면에서의 낮은 압력은 작물 생산용 온실을 설계할 때 주요 장애물에 해당한다. 때문에 저압하에서 식물 재배가 가능한 팽창식 온실의 개발에 관심이 집중되고 있다. 팽창식 온실의 구조, 내부 압력, 자재, 조명 방식, 방사선 차폐 등은 주요 설계 인자에 해당한다. 팽창식 온실 내의 낮은 압력은 구조물의 질량과 가스의 누출속도를 줄일 수 있다. 저압 조건에서는 증산속도가 급격하게 증가하여 식물의 수분요구도가 높게 나타난다. 증산 또는 수경재배시스템으로부터의 증발에 의해서 수분이 대기 중으로 방출될 때 증기압이 증가한다. 저압 조건에 있는 폐쇄계에서는 증기압의 변화가 전체 압력에 커다란 영향을 미친다. 그러므로 저압 조건의 수경재배시스템은 누수로 인하여 기화되는 수분 손실을 줄이기 위해서 고도로 밀폐되어야 한다. 또한 저압으로 유지되는 온실내의 상대습도를 높게 유지할 수 있는 환경제어 기술이 개발되어야 한다. 향후 폐쇄생태계 생명유지 시스템의 핵심 기술은 우주뿐만 아니라 지구상의 사막, 극지방 또는 해저와 같은 열악한 환경 조건에서도 생명 지원을 가능케 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.41-48
• /
• 2001

In this study, two factors are simultaneously considered for assessing tunnel face stability: one is the effective stress acting on the tunnel face calculated by upper bound solution; and the other is the seepage force calculated by numerical analysis under the condition of steady-state groundwater flow. The seepage forces calculated by numerical analysis are compared with the results of a model test. From the results of derivations of the upper bound solution with the consideration of seepage forces acting on the tunnel face, it could be found that the minimum support pressure for the face stability is equal to the sum of effective support pressure and seepage pressure acting on the tunnel face. Also it could be found that the average seepage pressure acting on the tunnel face is proportional to the hydrostatic pressure at the same elevation and the magnitude is about 22% of the hydrostatic pressure for the drainage type tunnel and about 28% for the water-proof type tunnel. The model tests performed with a tunnel model had a similar trend with the seepage pressure calculated by numerical analysis. From the model tests it could be also found that the collapse at the tunnel face occurs suddenly and leads to unlimited displacement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.949-950
• /
• 2011

• 대한가정학회지
• /
• 제46권5호
• /
• pp.87-96
• /
• 2008

The purpose of this study was to establish which factors were considered when fashion companies discussed the intention of employing the internet in various capacities. A total of 228 candidates were surveyed between 17-11-07 and 17-01-08. The collected data was used to conduct various descriptive and comparative analyses. Firstly, environmental factors considered important were internal pressure, external pressure and uncertainty of the market. Organizational factors considered important were support of the chief executive officer, capacity of the organization and future directivity. Profit factors considered important were elevation of the business, customer relationship management, advantage of the internet and reduction of expenses. Prohibitive factors considered important were miscellaneous expenses, secession of the customer, internal opposition of the organization and convertible expenses. Secondly, fashion companies regarded internal pressure, external pressure, support of the chief executive officer, capacity of the organization, future directivity, elevation of the business, customer relationship management, advantage of the internet and miscellaneous expenses as important when discussing the introduction of the internet.

• 대한가정학회지
• /
• 제38권12호
• /
• pp.145-158
• /
• 2000

The purpose of this study was to examine the relative importance of parental expectations to adolescents'psychological, behavioral, school-based adjustment, and academic achievement. Subjects of this study consisted of 359 adolescents(177 boys and 182 girls) in Cheong-ju City. There was a statistically meaningful difference in the effect of parental expectations of academic performance on adolescents'adjustment according to sex of adolescents'. Maternal pressure, support form mothers, and paternal pressure were significant factors predicting adolescents'relative psychological adjustment and academic achievement. Support and pressure from mothers were associated with adolescents'behavioral adjustment. The research suggest that maternal pressure was the strongest risk factors in relation to the effects of parental expectations of academic performance on adolescents'adjustment.