• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.96-106
• /
• 2020

This study designed four types with a different halter-neck shoulder straps of an athleisure brassiere for women in their 20-40s as well as analyzed the shoulder strap pressure, shoulder strap position, subjective sensation, and design preference when wearing them. The design basis was to reduce the pressure at the back of the neck area, to allow the shoulder strap to pass down the neck as far as possible, and to send the anatomically sensitive side neck out as far as possible. As a result, H, which had the best subjective sensation and design preference, had the shoulder strap positioned more towards the shoulder point; in addition, the back of the neck did not pass. It was also found that the shoulder strap pressure near the neck was small. However, E, with the lowest subjective sensation, had the highest shoulder strap pressure and was placed up the neck. This confirmed that the position and pressure of the shoulder strap are variable when influencing the subjective sensation.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.50-57
• /
• 2008

The prediction of hydrate pellet decomposition characteristics is required to design the regasification process of GTS (gas to solid) technology, which is considered as an economic alternative for LNG technology to transport natural gas produced from small and stranded gas wells. Mathematical model based on the conservation principles, the phase equilibrium relation, equation of gas state and phase change kinetics was set up and numerical solution procedure employing volume averaged fixed grid formulation and extended enthalpy method are implemented. Initially, porous methane hydrate pellet is at uniform temperature and pressure within hydrate stable region. The pressure starts to decrease with a fixed rate down to the final pressure and is kept constant afterwards while the bounding surface of pellet is heated by convection. The predicted convective heat and mass transfer accompanied by the decomposed gas flow through hydrate/ice solid matrix is reported focused on the comparison of spherical and cylindrical pellets having the same effective radius.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.1
• /
• pp.92-99
• /
• 1996

A mathematical model of the pressure gradient of supercritical CO2 in a vertical tobacco bed was developed in this study. In particular, the compaction of the tobacco as a function of temperature and CO2 flow is included in the model. Downflow of CO2 (low condition is described. At velocities in excess of 0.6 cm/sec at 7$0^{\circ}C$, there is a large increase in pressure gradient for beds deeper than about 0.5 m. The proposed model offers a better understanding of operating the process using supercritical CO2.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.989-995
• /
• 2002

A new fluidized bed heat exchanger for exhaust gas heat recovery is developed. Compared to the existing ones, the present heat exchanger system is featured by the particle fluidization method which does not depend on conventionally used baffle plate with holes and by the multiple downcomer tubes to extract heat energy from hot particle during the time particles moves down to be fed again to the hot gas line. Particles are introduced to the main hot gas stream alongside the pipe circumference. The heat exchanger performance and pressure drop are evaluated through experiments for the present gas-to-water heat exchanger system.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.123-129
• /
• 2005

The unbalance of the power output, noise, and vibration is happened by the disproportionate pressure variation in the cylinder. For this reason, decrease of the pressure in the cylinder and increase of the residual gas effect on the engine performance. If the abnormal combustion is continued, the crack would be occurred in the engine block. And it could be broken down. For the normal combustion of the SI engine, it is important to supply the balanced mixture by each operating condition. In this study, it was tested the combustion characteristics in the cylinder according to the abnormal adjusting of intake & exhaust valve. This test is willing to set a basic data's analysis fur developing an automotive diagnosis system by analyzing the pressure in the cylinder, the output signal of MAP sensor, the exhaust gas, etc.

• Wind and Structures
• /
• v.13 no.4
• /
• pp.363-374
• /
• 2010

Appropriate scaling methods for wind tunnel modelling of building internal pressures induced through a dominant opening were investigated. In particular, model cavity volume distortion and geometric scaling of the opening details were studied. It was found that while model volume distortion may be used to scale down buildings for wind tunnel studies on internal pressure, the implementation of the added volume must be done with care so as not to create two cavity resonance systems. Incorrect scaling of opening details was also found to generate incorrect internal pressure characteristics. Furthermore, the effective air slug or jet was found to be longer when the opening was near a floor or sidewall as evidenced by somewhat lower Helmholtz frequencies. It is also shown that tangential flow excitation of Helmholtz resonance for off-centre openings in normal flow is also possible.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.613-618
• /
• 2005

The paper is concerned with the process design and the die design for manufacturing the preform of a large pressure vessel. The cold-working processes are introduced to improve the fatigue strength and to simplify the manufacturing process. By the finite element simulation, the parameter design is carried out, which is subjected to constraints such as the blank sire, press capacity and other minor limitations. The proposed design results are verified by the model experiments, in which the model is scaled down to one tenth of the original size.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.268-275
• /
• 2008

The prediction of hydrate pellet decomposition characteristics is required to design the regasification process of GTS (gas to solid) technology, which is considered as an economic alternative for LNG technology to transport natural gas produced from small and stranded gas wells. Mathematical model based on the conservation principles, the phase equilibrium relation, equation of gas state and phase change kinetics was set up and numerical solution procedure employing volume averaged fixed grid formulation and extended enthalpy method are implemented. Initially, porous methane hydrate pellet is at uniform temperature and pressure within hydrate stable region. The pressure starts to decrease with a fixed rate down to the final pressure and is kept constant afterwards while the bounding surface of pellet is heated by convection. The predicted convective heat and mass transfer accompanied by the decomposed gas flow through hydrate/ice solid matrix is reported focused on the comparison of spherical and cylindrical pellets having the same effective radius.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.889-894
• /
• 2001

In this study, the performances of various turbulence closure models are evaluated in the calculation of a transonic flow over axisymmetric bump. k-$\varepsilon$, explicit algebraic stress, and two Reynolds stress models, i.e., GL model proposed by Gibson & Launder and SSG model proposed by Speziale, Sarkar and Gatski, are chosen as turbulence closure models. SSG Reynolds stress model gives best predictions for pressure coefficients and the location of shock. The results with GL model also show quite accurate prediction of pressure coefficients down-stream of shock wave. However, in the predictions of mean velocities and turbulent stresses, the results are not so satisfactory as in the prediction of pressure coefficients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.175-183
• /
• 2008

In this paper, a new in-pipe inspection robot was developed for inspecting a large number of circular pipe insides of the sea plant, ships, and buildings. A new pressure generation system was devised to inspect circular pipes with different diameters and to move up and down slant or perpendicular slopes inside of the pipe. Also, a design method was analyzed to decide the capacity of driving motor for the robot if the mass and maximum velocity of the robot are identified. According to the design specification, a robot was developed and was tested to verify the performance of the pressure generation system. For tests, a control system was developed.