• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.715-728
• /
• 1997

The aim of this paper is to investigate the secondary buckling behaviour and mode-coupling of spherical caps under uniformly external pressure. The analysis makes use of a rotational finite shell element on the basis of strain-displacement relations according to Koiter's shell theory (Small Finite Deflections). The post-buckling behaviours after a bifurcation point are analyzed precisely by considering multi-mode coupling between several higher order harmonic wave numbers: and on the way of post-buckling path the positive definiteness of incremental stiffness matrix of uncoupled modes is examined step by step. The secondary buckling point that has zero eigen-value of incremental stiffness matrix and the corresponding secondary mode are obtained, moreover, the secondary post-buckling path is traced.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.707-713
• /
• 2013

커플링 볼트는 조립, 분해 시 작업자의 안전이 고려되는 부분이나 공정 중단의 비용이 중요한 부분에서 기존의 일반볼트를 대체한다. 해양과 발전분야에서 세계적으로 광범위하게 적용되어, 회전하는 플랜지 결합에 사용되어 왔고, 국제적인 국가 선급 협회나 규제기관의 사용을 승인받아 왔었다. 커플링 볼트는 유압식으로 인장되어 플랜지 사이를 안정적으로 단단히 결합한다. 본 논문에서는 발전소 커플링 볼트의 국산화를 위해, 역설계를 통해 현재 사용 중인 볼트의 치수를 측정, 역학적인 수식을 통해 권장 체결하중의 기준을 살펴보았다. 마찰계수는 실험을 통해 선정하였고, 구조해석을 통해 체결상태를 확인하였다. 형상변수에 따른 접촉압력의 변화를 볼트 재설계시 참고할 수 있도록 나타내었다.

• 화약ㆍ발파
• /
• 제36권2호
• /
• pp.1-9
• /
• 2018

폴리머 겔의 발파 효과를 평가하기 위해 AUTODYN을 이용한 단일 발파공 모델 시뮬레이션을 수행하였다. 발파공 내부 에멀젼 폭약과 공벽간의 채움재는 공기와 폴리머 겔을 적용하여 서로 결과를 비교하였으며, 디커플링 지수 1.0인 밀장전과 디커플링 지수 1.25, 1.56에 대해 각각 해석하였다. 폴리머 겔의 발파 효과 평가를 위한 기준은 밀장전 case를 기준으로 하였다. 해석 결과로서 석회석 모델의 파쇄 및 균열 발생에서 공기보다 폴리머 겔 적용의 경우가 높은 파쇄 정도를 나타냈고, 지정 게이지에서의 최고압력 또한 공기의 경우보다 폴리머 겔 적용이 높은 수치를 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.31-35
• /
• 2002

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, composite materials were put to dry interfacial treatment by use of plasma technology. It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.393-414
• /
• 2019

This paper presents seismic analysis of concrete gravity dams considering soil-structure-fluid interaction. Displacement based plane strain finite element formulation is considered for the dam and foundation domain whereas pressure based finite element formulation is considered for the reservoir domain. A direct coupling method has been adopted to obtain the interaction effects among the dam, foundation and reservoir domain to obtain the dynamic responses of the dam. An efficient absorbing boundary condition has been implemented at the truncation surfaces of the foundation and reservoir domains. A parametric study has been carried out considering each domain separately and collectively based on natural frequencies, crest displacement and stress at the neck level of the dam body. The combined frequency of the entire coupled system is very less than that of the each individual sub-system. The crest displacement and neck level stresses of the dam shows prominent enhancement when coupling effect is taken into consideration. These outcomes suggest that a complete coupled analysis is necessary to obtain the actual responses of the concrete gravity dam. The developed methodology can easily be implemented in finite element code for analyzing the coupled problem to obtain the desired responses of the individual subdomains.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.15-28
• /
• 1998

As an alternative for solving the incompressible Navier-Stokes equations, we present a vorticity-based integro-differential formulation for vorticity, velocity and pressure variables. One of the most difficult problems encountered in the vorticity-based methods is the introduction of the proper value-value of vorticity or vorticity flux at the solid surface. A practical computational technique toward solving this problem is presented in connection with the coupling between the vorticity and the pressure boundary conditions. Numerical schemes based on an iterative procedure are employed to solve the governing equations with the boundary conditions for the three variables. A finite volume method is implemented to integrate the vorticity transport equation with the dynamic vorticity boundary condition . The velocity field is obtained by using the Biot-Savart integral derived from the mathematical vector identity. Green's scalar identity is used to solve the total pressure in an integral approach similar to the surface panel methods which have been well-established for potential flow analysis. The calculated results with the present mettled for two test problems are compared with data from the literature in order for its validation. The first test problem is one for the two-dimensional square cavity flow driven by shear on the top lid. Two cases are considered here: (i) one driven both by the specified non-uniform shear on the top lid and by the specified body forces acting through the cavity region, for which we find the exact solution, and (ii) one of the classical type (i.e., driven only by uniform shear). Secondly, the present mettled is applied to deal with the early development of the flow around an impulsively started circular cylinder.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2169-2180
• /
• 1992

본 연구에서는 비정상적인 효과가 매우 클 경우에 추진제가 고체-용융층-기체 의 상변화를 거쳐 변환된 기체가 화학반응을 할 때, Vieille의 관계식이 얼마나 수정 되어야 하는가를 검토한다. 그러나, 연소실내의 파의 전파까지 고려하면 문제가 너 무 커지므로, 시간의 함수로 주어진 압력에 대하여 기체의 생성등이 어떻게 응답하는 가 만이 연구되었다.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.675-682
• /
• 2010

The flood impact pressure acting on a vertical wall resulting from a dam-breaking problem is simulated using a navier-Stokes(N-S) solver. The N-S solver uses Eulerian Finite Volume Method(FVM) along with Volume Of Fluid(VOF) method for 2-D incompressible free surface flows. A Split Lagrangian Advection(SLA) scheme for VOF method is implemented in this paper. The SLA scheme is developed based on an algorithm of Piecewise Linear Interface Calculation(PLIC). The coupling between the continuity and momentum equations is affected by using a well-known Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm. Several two-dimensional numerical simulations of the dam-breaking problem are presented to validate the accuracy and demonstrate the capability of the present algorithm. The significance of the time step and grid resolution are also discussed. The computational results are compared with experimental data and with computations by other numerical methods. The results showed a favorable agreement of water impact pressure as well as the global fluid motion.

• Wind and Structures
• /
• 제28권2호
• /
• pp.89-97
• /
• 2019

The non-linear equations governing wind-induced internal pressures for a two-compartment building with background leakage are linearized based on some reasonable assumptions. The explicit admittance functions for both building compartments are derived, and the equivalent damping coefficients of the coupling internal pressure system are iteratively obtained. The RMS values of the internal pressure coefficients calculated from the non-linear equations and linearized equations are compared. Results indicate that the linearized equations generally have good calculation precision when the porosity ratio is less than 20%. Parameters are analyzed on the explicit admittance functions. Results show that the peaks of the internal pressure in the compartment without an external opening (Compartment 2) are higher than that in the compartment with an external opening (Compartment 1) at lower Helmholtz frequency. By contrast, the resonance peak of the internal pressure in compartment 2 is lower than that in compartment 1 at higher Helmholtz frequencies.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.553-562
• /
• 2021

In this paper, a hybrid scaled boundary finite element and finite volume method (SBFEM-FVM) is proposed for simulating hydraulic-fracture propagation in brittle concrete materials. As a semi-analytical method, the scaled boundary finite element method is introduced for modelling concrete crack propagation under both an external force and water pressure. The finite volume method is employed to model the water within the crack and consider the relationship between the water pressure and the crack opening distance. The cohesive crack model is used to analyse the non-linear fracture process zone. The numerical results are compared with experimental data, indicating that the F-CMOD curves and water pressure changes under different loading conditions are approximately the same. Different types of water pressure distributions are also studied with the proposed coupled model, and the results show that the internal water pressure distribution has an important influence on crack propagation.