• 제목/요약/키워드: Pressure Coupling

검색결과 442건 처리시간 0.024초

A STUDY ON NUMERICAL COUPLING BETWEEN MECHANICAL AND HYDRAULIC BEHAVIORS IN A GRANITE ROCK MASS SUBJECT TO HIGH-PRESSURE INJECTION

  • Jeong, Woo-Chang;Jai-Woo;Song, Jai-Woo
    • Water Engineering Research
    • /
    • 제2권2호
    • /
    • pp.123-138
    • /
    • 2001
  • An injection experiment was carried ut to investigate the pressure domain within which hydromechanical coupling influences considerably the hydrologic behavior of a granite rock mass. The resulting database is used for testing a numerical model dedicated to the analysis of such hydromechanical interactions. These measurements were performed in an open hole section, isolated from shallower zones by a packer set at a depth of 275 m and extending down to 840 m. They consisted in a series of flow meter injection tests, at increasing injection rates. Field results showed that conductive fractures from a dynamic and interdependent network, that individual fracture zones could not be adequately modeled as independent systems, that new fluid intakes zones appeared when pore pressure exceeded the minimum principal stress magnitude in that well, and that pore pressures much larger than this minimum stress could be further supported by the circulated fractures. These characteristics give rise to the question of the influence of the morphology of the natural fracture network in a rock mass under anisotropic stress conditions on the effects of hydromechanical couplings.

  • PDF

다물체계내 유연체의 구조기인 소음해석 (Structure Borne Noise Analysis of a Flexible Body in Multibody System)

  • 김효식;김창부
    • 한국소음진동공학회논문집
    • /
    • 제13권11호
    • /
    • pp.882-889
    • /
    • 2003
  • This paper presents the method for structure borne noise analysis of a flexible body in multibody system. The proposed method is the superposition method using the flexible multibody dynamic analysis and the finite element one. This method is executed in 3 steps. In the 1st step, time dependent quantities such as dynamic loads, modal coordinates and gross body motion of the flexible body are calculated through a flexible multibody dynamic analysis. And frequency response functions of those time dependent quantities are computed through Fourier transforms. In the 2nd step, acoustic pressure coefficients are obtained through structure-acoustic coupling analyses by the finite element method. In the final step, frequency responses of acoustic pressure at the acoustic nodes are recovered through linear superposition of frequency response functions with acoustic pressure coefficients. The accuracy of the proposed method is verified in the numerical example of a simple car model.

Effects of Sputtering Parameters on the Properties of Co/Pd Multilayered Films

  • Shin, J. N.;Hong, D. H.;Lee, T. D.
    • Journal of Magnetics
    • /
    • 제8권4호
    • /
    • pp.146-148
    • /
    • 2003
  • Multilayered films of Co/Pd have been studied as a candidate material for a high density perpendicular recording medium due to higher anisotropy energy. However, high exchange coupling among grains results in large transition noise. To reduce the exchange coupling and grain size, addition of 3rd elements and physical separation of grains have been attempted. In the present paper, effects of sputtering pressure, Co sublayer thickness and Pd underlayer thickness on magnetic properties and microstructures were studied. It was found that by increasing sputtering pressure from 5 mTorr to 25 mTorr, Ms decreased to one half and coercivity increased more than 5000 Oe. The increase of the coercivity is associated with physical separation of grains by high pressure sputtering. Ms per volume of Co for Co/Pd multilayered film deposited at 25 mTorr shows continuous decrease with increasing Co sublayer thickness. This was related to void formation and intermixing of Co/Pd interface. Also, effect of Pd underlayer thickness on magnetic properties will be discussed.

CFD와 공간분포를 고려한 반경험식을 이용한 해머헤드 발사체의 천음속 압력섭동 예측 (Prediction of Pressure Fluctuations on Hammerhead Vehicle at Transonic Speeds Using CFD and Semi-empirical Formula Considering Spatial Distribution)

  • 김영화;남현재;김준모;선철
    • 한국항공우주학회지
    • /
    • 제49권6호
    • /
    • pp.457-464
    • /
    • 2021
  • 위성발사체에 심각한 진동하중을 발생시키는 버펫 현상을 해석하기 위하여, CFD 해석과 반경험식을 결합하여 천음속 영역 해머헤드 발사체에서 발생할 수 있는 압력섭동을 예측하였다. RANS 해석을 수행하여 충격파 진동 영역, 박리영역, 박리 재부착 지점 등을 확인하였으며, 경계층 두께, 배제 두께, 경계층 끝단에서의 유동 정보를 계산하였다. RANS 결과와 공간 분포를 고려한 반경험식을 결합하여 해머헤드 페어링 주위의 압력 섭동과 파워스펙트럼을 예측하였고 시험 결과와 비교하였다.

Fluid-structure interaction system predicting both internal pore pressure and outside hydrodynamic pressure

  • Hadzalic, Emina;Ibrahimbegovic, Adnan;Dolarevic, Samir
    • Coupled systems mechanics
    • /
    • 제7권6호
    • /
    • pp.649-668
    • /
    • 2018
  • In this paper, we present a numerical model for fluid-structure interaction between structure built of porous media and acoustic fluid, which provides both pore pressure inside porous media and hydrodynamic pressures and hydrodynamic forces exerted on the upstream face of the structure in an unified manner and simplifies fluid-structure interaction problems. The first original feature of the proposed model concerns the structure built of saturated porous medium whose response is obtained with coupled discrete beam lattice model, which is based on Voronoi cell representation with cohesive links as linear elastic Timoshenko beam finite elements. The motion of the pore fluid is governed by Darcy's law, and the coupling between the solid phase and the pore fluid is introduced in the model through Biot's porous media theory. The pore pressure field is discretized with CST (Constant Strain Triangle) finite elements, which coincide with Delaunay triangles. By exploiting Hammer quadrature rule for numerical integration on CST elements, and duality property between Voronoi diagram and Delaunay triangulation, the numerical implementation of the coupling results with an additional pore pressure degree of freedom placed at each node of a Timoshenko beam finite element. The second original point of the model concerns the motion of the outside fluid which is modeled with mixed displacement/pressure based formulation. The chosen finite element representations of the structure response and the outside fluid motion ensures for the structure and fluid finite elements to be connected directly at the common nodes at the fluid-structure interface, because they share both the displacement and the pressure degrees of freedom. Numerical simulations presented in this paper show an excellent agreement between the numerically obtained results and the analytical solutions.

압력보정법을 이용한 8개의 원심압축기 임펠러 CFD의 적용 연구 (Application of Pressure Correction Method to CFD Work for 8 Centrifugal Compressor Impellers)

  • 오종식;노수혁;현용익
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.226-235
    • /
    • 2000
  • Two representative finite volume methods, i.e., the time marching method and the pressure correction method, were applied to 8 centrifugal compressor impeller flows, with low to very high level of pressure ratio, among which 7 impellers' experimental performance is given in the open literature. The present study is focused on the prediction differences from both methods, developed by the authors, in the pressure correction method's point of view. In all cases, the time marching method gives a satifactory solution, but the pressure correction method does not. Up to about $18\%$ less level of total-to-total pressure ratio is predicted by the pressure correction method as the level of the impeller pressure ratio increases up to about 10. The drop of total pressure ratio is caused by the underestimation of static pressure rise which seems to be attributed to inappropriate linearization and discretization of the pressure/density coupling terms in the pressure correction equation.

  • PDF

포화된 암반에 굴착된 원형공동의 수리-역학적 거동 (Hydro-mechanical Behavior of a Circular Opening Excavated in Saturated Rockmass)

  • 이연규;신희순
    • 화약ㆍ발파
    • /
    • 제23권2호
    • /
    • pp.23-35
    • /
    • 2005
  • 지하수로 포화된 암반내의 공동을 굴착하면 공동 주위에서 응력의 재분배로 인하여 초기 공극수압의 변화가 발생한다. 이러한 공극수압의 변화는 다시 암반의 역학적 거동에 영향을 미치게 된다. 그러므로 공동 주변 암반에서 굴착으로 인해 형성된 공극수압이 소산과정에서 암반의 거동은 공극수압의 변화를 고려하지 않은 해석과 차이를 보이게 된다. 이 연구에서는 굴착직후 짧은 시간 동안에서 공동주변에서 발생하는 응력재분포와 공극수압변화 양상을 수치해석적으로 검토하였다. 공극수압을 고려하지 않는 탄성해석과는 달리 굴착직후 짧은 시간동안에는 공동 벽면의 직후방에서 최대접선응력이 형성되고 있음을 확인할 수 있었다.

An improved radius-incremental-approach of stress and displacement for strain-softening surrounding rock considering hydraulic-mechanical coupling

  • Zou, Jin-Feng;Wei, Xing-Xing
    • Geomechanics and Engineering
    • /
    • 제16권1호
    • /
    • pp.59-69
    • /
    • 2018
  • This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

3차원 열-기계 커플링 모델에 의한 벤틸레이티드 디스크-패드 브레이크의 온도 분포와 접촉 압력에 관한 연구 (A Study on Temperature Field and Contact Pressure in Ventilated Disc-Pad Brake by 3D Thermo-mechanical Coupling Model)

  • 황평;서희창;우쉔
    • Tribology and Lubricants
    • /
    • 제25권6호
    • /
    • pp.421-426
    • /
    • 2009
  • The brake system is important part of automobile safety system. The disc brake system is divided two parts: the rotating axisymmetrical disc and the stationary pads. During braking, the kinetic energy and potential energy of moving vehicle were converted into the thermal energy through frictional heat between the brake disc and the pads. The frictional heat, which is generated on the interface of the disc and pads, can cause high temperature during the braking process. The object of present work is to determine temperature and thermal stress, to compare to simulation results and experimental results in the disc by partial 3D model of ventilated disc brake with appropriate boundary conditions. In the simulation process, the mechanical loads were applied to the thermo-mechanical coupling analysis in order to simulate the process of heat produced by friction.

팔라듐 촉매를 이용한 요오드화 방향족 화합물과 Diethylmalonate 와의 CO 첨가 커플링반응 (Palladium-Catalyzed Carbonylative Coupling of Aryl Iodide and Diethylmalonate)

  • 김진일;이광혁;윤태순
    • 대한화학회지
    • /
    • 제33권5호
    • /
    • pp.530-537
    • /
    • 1989
  • 요오드화 방향족 화합물과 diethylmalonate를 일산화탄소 존재 하에서 팔라듐 촉매를 이용한 CO 첨가 커플링반응으로 다양한 치환체를 지닌 diethylbenzoulmalonate를 비교적 좋은 수득률로 합성하였다. Diethylbenzoylmalonate 유도체의 새로운 합성경로인 팔라듐 촉매를 이용한 CO 첨가 커플링반응은 이가의 팔라듐 촉매, 3 당량의 무기염기 및 극성이 큰 용매를 사용한 경우 가장 잘 진행되었다. 또한, 이 반응을 10기압의 일산화탄소 존재하에서 실시했을 때 diethylbenzoylmalonate 유도체의 수득률은 상압에 비하여 증가하였다.

  • PDF