• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.264-269
• /
• 1999

The effects of film thickness and moisture absorbing materials(MAM) on the ginger qualities were investigated during MA storage for 150 days. LDPE films of 0.04, 0.06 and 0.08mm thicknesses were applied to select the adequate film in gas permiability. MAMs of sheet and sachet type were applied to 0.06mm-LDPE film bag to prevent moisture condensation during storage. Thickness of film used affected neither weight loss nor firmness of gingers during U storage. But the thinner in thickness showed the less changes in sprouting, spoilage and reducing sugar. Moreover, compared with MAP alone, MAPs with MAM of both sachet and sheet styles led to the weight loss of gingers increasing by more than 3-4 times, but sprouting rate, spoilage rate and reducing sugar decreasing by 3.3, 1.4 and 2.3 times, respectively. These results showed that MAP with UM was significantly effective to prolong the freshness of ginger by longer than 2 times, compared with MAP alone.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.720-726
• /
• 2012

This study was carried out to investigate the food value of K. pictus sprouts. The total ginsenoside content was 67.4 mg/kg. Including Ginsenoside Rg1, a total of five different types were detected by the experiment. The total phenol content was 33.77 mg/100 g. Including seven different type of essential amino acids, the total amino acid content of K. pictus sprouts was 33,744 mg/100 g. The results of the analysis of the free amino acid content showed that the total bitterness was much higher than the total sweetness. From the above results, the food characteristics of K. pictus sprouts could be determined. To improve their consumption, their bitterness must be reduced.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.472-477
• /
• 2004

This study was carried out to investigate the effect of liquid calcium(LC) on the quality of kimchi during fermentation. LC retarded the decreasing rate of pH and the increasing rate of titratable acidity during fermentation at $10^{\circ}C$, and the effect was more conspicuous at $7.0\%(v/w)$ than at $3.5\%(v/w)$ in each LC type. Microbial counts of total and lactic acid bacteria were lower in LC added kimchi than control before 8 days but higher in LC added kimhi after 8 days. Changes in color of a value were gradually increased, but L and b value were decreased. Calcium content of added LC on kimchi; A concentration $3.5\%(v/w),\;7.0\%(v/w)$ were $103{\sim}110\;mg\%,\;145{\sim}163\;mg\%$ and B concentration $3.5\%,\;7.0\%$ were $140{\sim}151\;mg\%,\;210{\sim}220\;mg\%$.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.154-159
• /
• 2004

In order to develop of health-oriented convenience foods for rice consumption, functional Misutkaru drink was made by adding several medicinal herbs extracts to fundamental Misutkaru based cereal powder(rice, barley and soybean). Fundamental Misutkaru drink was prepared with the ratio of cereal mixed rice(5g), barley(5g) and soybean(5g) on water (100 mL) and several medicinal herbs extracts. Liriopis Tuber(50%), Omija(15%), Ginseng(10%) and Jujube(25%) were mixed to fundamental Misutkaru as functional Misutkaru. And then it was extracted to added water of 10times during 36hrs at 75$^{\circ}C$. For instant Misutkaru drink of health-oriented convenience foods, mixture of them was made with fundamental Misutkaru drink(80%), extract of several medicinal herbs(20%), and it's sensory score was high. Autoclaved functional Misutkaru drink for long storage period was changed rheological type badly. Overall acceptability and storage period of nonautoclaved functional Misutkaru drink to added extract of several medicinal herbs was higher than fundamental Misutkaru drink.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.569-573
• /
• 2006

This study was conducted to manufacture new product containing high soluble polysaccharide from Hericium erinaceus extract. The new products were prepared for powder, granulate and tablet form by spray drying process. The high soluble powder form was mixed with sub-ingredients and then granulated form by granulator and molded as tablet form by a press molder respectively. Moisture content of products was following order; spray dried powder > granule > tablet Total sugar content of produce was observed to 19.14% in spray dried powder, 37.58% in granulate and 35.76% in tablet. The hue angle of products was $85.5^{\circ}$ in spray dried powder, $95.37^{\circ}$ in granulate and $94.67^{\circ}$ in tablet. The absorption capacity was higher in powder, but the product type did not affect the color.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.411-416
• /
• 2003

An effort was attempted to utilize an under-utilized protein source, rice bran protein, in coating or wrapping food material for the purpose of protection them from oxidation and bacterial infection. However, the utilization of rice bran protein as a food coating material is limited because the rice bran protein coating material itself can be spoiled by a bacterial infection. Therefore, this study was conducted to produce the economical and antibacterial rice bran protein film by utilizing rice bran and bacteriocin-producing microorganism. Bacteriocin produced by Pseudomonas putida 21025 was partially purified after 33h of shaking incubation at 30$^{\circ}C$. The amount of amino-type nitrogen did not increase in the rice bran protein film containing the bacteriocin any more after gradual increase upto the content of 0.22％ for 8 days, while that without the bacteriocin increased continuously, implying that application of the bacteriocin to the rice bran had positive effects on prolonging the shelf-life of not only film itself but also the foods wrapped by this film.

• Archives of Reconstructive Microsurgery
• /
• v.26 no.1
• /
• pp.9-13
• /
• 2017

Purpose: Fingertip amputations are the most common type of upper limb amputations. Composite grafting is a simple and cost-effective technique. Although many factors have investigated the success of composite grafting, the success rate is not high. Therefore, this study was conducted to investigate whether the microscopic procedure process during composite grafts improves the success rate. Materials and Methods: Thirteen cases of unreplantable fingertip amputation underwent a microscopic resection procedure for composite graft in the operating room. The principle of the procedure was to remove the least devitalized tissue, maximize the clean tissue preservation and exact trimming of the acral vessel and to remove as many foreign bodies as possible. Results: All fingertips in the thirteen patients survived completely without additional procedures. Conclusion: Composite grafting allows for the preservation of length while avoiding the donor site morbidity of locoregional flaps. Most composite grafts are performed as quickly as possible in a gross environment. However, we take noticed the microscopic resection. This process is thought to increase the survival rate for the following reasons. First, the minimal resection will maximize the junction surface area and increase serum imbibition. Second, sophisticated trimming of injured distal vessels will increase the likelihood of inosculation. Third, accurate foreign body removal will reduce the probability of infection and make it possible to increase the concentration and efficiency in a microscopic environment. Although there is a need for more research into the mechanisms, we recommend using a composite graft under the microscopic environment.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.135-139
• /
• 2006

Most bacteria form biofilm as self-defence system, making efficient food sanitization, preservation, and instrument washing more difficult. Biofilm formation of Salmonella, E. coli, B. cereus, and S. aureus was observed during 24 hr food preservations by performing microtiter plate and glass wool assays. Most cells formed biofilm and attached onto glass wool. When biofilm formation and injury were analyzed on the microtiter plate, 10 and 20% acid-injured E. coli and S. aureus, respectively, 30-50% cold temperature $(4^{\circ}C)-injured$ B. cereus and E. coli, and 30-55% 6% sodium chloride solution-injured Salmonella showed significant biofilm formation. Results indicate biofilm formation level differed within species depending on type of stress.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.402-405
• /
• 1999

Pusan, Kwanagju, Yangjae Floriculture Auction Market to packaging and distribution status of cut flowers in Korean markets from October, 1997 to Feburuary, 1998 this study was surveyed. In case of packaging, the inner packaging materials was used almost used news papers and polyethylene films, the outer box was double wall corrugated paperboard box. Plastic container box was a few. The using shape of box was A-1 type, bending materials was PP film and OPP tape. There was whole sale and retail in all Korean markets in case of distribution. The distribution route was three, the one was farmers through consignments in Seoul to consummers, it was 42% of total distribution volume. The other was auction market in Yangjae, the distribution volume was 18%. The last was distributed in farmers and provincial markets by the dealers, the volume was 40%. All farmers and officers want to applicate the standard regulation of packaging box, but dealers were not.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.7
• /
• pp.179-186
• /
• 2019

Air lime is a traditional building material of Korea. It had been used in roofs, walls, floors and masonry joints of traditional buildings until the advent of Portland cement. However, due to its low strength and durability, the lime is currently avoided as a repair or restoration material for the preservation of architectural heritage. Furthermore, due to the current practice of using hydraulic materials such as Portland cement, understanding of the material characteristics of air lime is very poor in practice. In this context, this study intended to improve the mechanical properties of the air lime mortar by reducing water contents, and also the carbonation reaction of the mortar was quantitatively evaluated to clearly understand the characteristics of this material. Accordingly, air lime mortar with a water-to-binder ratio of 0.4 was manufactured using polycarboxylate-type superplasticizer. During the 7 days of sealed curing period, the mortar did not harden at all. In other words, there was no reaction required for hardening since it could not absorb carbon dioxide from the atmosphere. However, once exposed to the air, the compressive strength of the mortar began to rapidly increase due to the carbonation reaction, and the strength increased steadily until the 28th day; after then, the strength development was significantly slowed down. On the 28th day, the mortar exhibit a compressive strength of about 5 MPa, which is equivalent to the European standard regarding strength of hydraulic lime used for preservation of architectural heritage.