• 한국식품저장유통학회지
• /
• 제15권1호
• /
• pp.74-78
• /
• 2008

콩(품종 : 태광)에 증류수를 가수한 후 $40^{\circ}C$의 오븐에서 함수율 $6.74{\sim}28.87%(db)$ 사이의 구간에서 5수준의 일정한 함수율로 건조하여 탈습 시료를 조제한 다음 온도를 $10^{\circ}C$씩 증가시키며 5수준(5, 15, 21, 35, $45^{\circ}C$)에서 평형상대습도를 측정하고, 농산물의 평형함수율/평형상대습도 예측에 많이 쓰이고 있는 수정 Henderson 모델, 수정 Chung-Pfost 모델, 수정 Halsey 모델, 수정 Oswin 모델, 수정 GAB 모델에 대하여 실험상수를 구하고, 결정계수와 F값 및 평균상대오차율을 기준으로 하여 예측모델로서의 적합성을 검정한 결과는 다음과 같다. 콩은 함수율이 16.70%(db) 이하의 시료에서 온도가 낮을수록 그리고 함수율이 낮을수록 평형상대습도가 낮은 값을 나타냈으며, 함수율 28.87%(db)의 시료에서는 온도가 높아짐에 따라 평형상대습도 값이 낮아지는 현상을 보였다. 콩의 흡습 평형함수율 및 평형상대습도의 예측에는 본 실험에서 선정 분석한5개의 모델 모두사용 가능하나, 수정 GAB 모델이 평형함수율 예측과 평형상대습도 예측에 가장 적합하였다.

• 한국식품저장유통학회지
• /
• 제19권5호
• /
• pp.639-644
• /
• 2012

본 실험은 형광분광법을 이용하여 분말화된 대두의 산패도를 유지의 추출과정 없이 직접 측정하는 방법을 확립하기 위해 실시하였다. FST와, TBA test, 산가 측정법을 이용하여 $25^{\circ}C$와 $90^{\circ}C$에서 20일 동안 저장하면서 산패도에 따라 값을 비교하였다. $25^{\circ}C$에서 저장 기간 중의 산패도는 변화가 없음을 알 수 있었다. 모든 측정치들은 초기값에 비해 20일 후의 값이 크게 차이 없이 일정한 것을 알 수 있었다. 반면 $90^{\circ}C$에서는 FST의 경우 8일에서 11일 사이에 FI값이 크게 증가하는 경향을 보인 후 일정하게 값이 증가하는 경향을 볼 수 있었는데 TBA test에서는 0일에서 꾸준하게 증가하던 값이 다시 감소하는 것을 보였으며 이는 oleic acid와 linoleic acid의 함량이 높은 대두의 특징이라 할 수 있다. 본 연구에서 실험한 시료의 경우 산가는 FST와 같은 경향을 보여주었다. 본 연구의 중요한 결과는 FST를 이용하여 대두의 산패를 분말상에서 직접 측정하는 법을 확립한 것이며 이는 일반적으로 사용되는 TBA test와 산가를 이용한 직접측정법에 비해 측정시간이 빠르며 추출과정에 의한 오차를 최소화 할 수 있음을 보여주었다.

• 한국포장학회지
• /
• 제20권3호
• /
• pp.71-76
• /
• 2014

농가로부터 판매처까지의 유통단계에서 변화하는 온도 조건에 노출된 생표고버섯의 저장성향상을 확보하기 위해 개별포장과 2차 포장을 결합시킨 마스터 포장 시스템을 적용하였다. 온도가 저온으로 유지되는 수송과 저장 단계에서는 1차와 2차 포장의 결합 형태로 유통되고, 온도가 높은 판매단계에서는 외부 2차 포장을 해체한 후 1차 포장 조건에서 적절한 가스농도를 확보할 수 있는 개념으로 설계하고, 2차 마스터 포장 내에는 $Ca(OH)_2$의 이산화탄소 흡수제를 포함시켰다. 유통흐름 중에서 포장의 온습도와 기체조성을 측정하고, 마지막 단계인 판매처에서 포장을 개봉하여 버섯의 품질을 측정하였다. 공기조성을 유지하는 관행적인 통기성 천공 포장을 대조구로 함께 유통흐름을 거치게 하여 저장 후 품질을 비교하였다. 초기의 수송 및 저장 단계에서 적절한 저온조건이 유지되지 못한 것으로 나타났으나, 유통의 전체 과정에서 버섯 주위에 산소 농도 0.4~4.2%, 이산화탄소 농도 0.7~1.7%로 품질보존에 도움이 되는 기체조성이 유지되었다. 포장 전 예건처리가 버섯의 품질보존에 효과가 있는 반면에, 마스터 포장 시스템의 긍정적 효과는 비예건 버섯에 뚜렷이 나타났다. 보다 효과적인 버섯 품질보존을 위해서 예건 처리 및 온도관리와 함께 조화된 마스터 포장 시스템의 설계가 추가적으로 이루지고 검토될 필요가 있는 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제50권4호
• /
• pp.238-250
• /
• 2020

Purpose: This study aimed to evaluate the biocompatibility and the mechanical properties of ultraviolet (UV) cross-linked and biphasic calcium phosphate (BCP)-added collagen membranes and to compare the clinical results of ridge preservation to those obtained using chemically cross-linked collagen membranes. Methods: The study comprised an in vitro test and a clinical trial for membrane evaluation. BCP-added collagen membranes with UV cross-linking were prepared. In the in vitro test, scanning electron microscopy, a collagenase assay, and a tensile strength test were performed. The clinical trial involved 14 patients undergoing a ridge preservation procedure. All participants were randomly divided into the test group, which received UV cross-linked membranes (n=7), and the control group, which received chemically cross-linked membranes (n=7). BCP bone substitutes were used for both the test group and the control group. Cone-beam computed tomography (CBCT) scans were performed and alginate impressions were taken 1 week and 3 months after surgery. The casts were scanned via an optical scanner to measure the volumetric changes. The results were analyzed using the nonparametric Mann-Whitney U test. Results: The fastest degradation rate was found in the collagen membranes without the addition of BCP. The highest enzyme resistance and the highest tensile strength were found when the collagen-to-BCP ratio was 1:1. There was no significant difference in dimensional changes in the 3-dimensional modeling or CBCT scans between the test and control groups in the clinical trial (P>0.05). Conclusions: The addition of BCP and UV cross-linking improved the biocompatibility and the mechanical strength of the membranes. Within the limits of the clinical trial, the sites grafted using BCP in combination with UV cross-linked and BCP-added collagen membranes (test group) did not show any statistically significant difference in terms of dimensional change compared with the control group.

• Journal of Computing Science and Engineering
• /
• 제5권3호
• /
• pp.210-222
• /
• 2011

In this work, we study the problem of privacy-preservation data publishing in moving objects databases. In particular, the trajectory of a mobile user in a plane is no longer a polyline in a two-dimensional space, instead it is a two-dimensional surface of fixed width $2A_{min}$, where $A_{min}$ defines the semi-diameter of the minimum spatial circular extent that must replace the real location of the mobile user on the XY-plane, in the anonymized (kNN) request. The desired anonymity is not achieved and the entire system becomes vulnerable to attackers, since a malicious attacker can observe that during the time, many of the neighbors' ids change, except for a small number of users. Thus, we reinforce the privacy model by clustering the mobile users according to their motion patterns in (u, ${\theta}$) plane, where u and ${\theta}$ define the velocity measure and the motion direction (angle) respectively. In this case, the anonymized (kNN) request looks up neighbors, who belong to the same cluster with the mobile requester in (u, ${\theta}$) space: Thus, we know that the trajectory of the k-anonymous mobile user is within this surface, but we do not know exactly where. We transform the surface's boundary poly-lines to dual points and we focus on the information distortion introduced by this space translation. We develop a set of efficient spatiotemporal access methods and we experimentally measure the impact of information distortion by comparing the performance results of the same spatiotemporal range queries executed on the original database and on the anonymized one.

• KIEAE Journal
• /
• 제8권5호
• /
• pp.61-68
• /
• 2008

For the recycling of the resources and the preservation of the environment, this study's purpose is to measure flexural behavior of the reinforced concrete beams with the major variables like concrete strength, replacement ratio of the recycled aggregate and the waste foundry sand and the tension reinforcement ratio and to present the data of the recycled aggregate used for the structure design. The experiment on the flexural behavior resulted in the followings. The ultimate strength of recycled R/C beam was manipulated proportionate to the tension reinforcement ratio, however the strength instantly decreased after passing the ultimate load due to the destroyed concrete of the compression side. The deflection at the maximum load varied from the tension reinforcement ratio by 5.5 times. The test specimen with the tension reinforcement ratio less than $0.5{\rho}b$ showed constant curve without change in the load from the yield to the ultimate load in contrast to the distinctive plastic region where the displacement was rising. Although the strain of main tension steel with the reinforcement ratio indicate different, the design of recycled concrete member can be applied for current design code for reinforced concrete structure as the ratio of tension reinforcement district the under the reinforcement ration in a balanced strain condition.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.19-23
• /
• 2020

Al-laminated packaging film incorporating ascorbic acid or tocopherol at inner food contact layer was tested in the potential to improve antioxidative preservation of powdered infant formula under CO₂-enriched atmosphere. Product of 200 g was packaged with the packaging film containing 0.3% antioxidant in sealant layer of low density polyethylene and stored at 30℃ for 286 days with periodic measurement of package atmosphere and product's quality attributes. The CO₂-flushed package resulted in shrinkage of tight contact between the product and the film not allowing gas sampling of package atmosphere after 140 days. Package of tocopherol-incorporated film allowed some ingress of oxygen after 112 days presumably due to its weakening of heat-seal area. The increased oxygen concentration in the tocopherol-added film package led to the concomitant increase of peroxide value, an index of lipid oxidation. On the other hand, packaging of ascorbic acid-added film pouch could suppress lipid oxidation marginally in consistent manner compared to control package without any antioxidant.

• 한국작물학회지
• /
• 제51권2호
• /
• pp.179-185
• /
• 2006

The Ministry of Agriculture and Forestry announced in 2001 that the overall amount of paddy land set aside for rice will be cut down by 12% by 2005, decreasing from 1.08 million to 953,000 hectares. When evaluating the value of paddy rice systems, the multi-function of paddy systems in the monsoon climate is vital importance. The main functions of paddy rice systems are to conserve biodiversity and maintain sustainability. Some crucial environmental benefits of the paddy rice systems include: flood prevention, recharge of water resources, water purification, soil erosion and landslide prevention, soil purification, landscape preservation and air purification. The paddy rice systems in Korea, which are more diverse than upland crop systems, are known to be composed of 14 orders, 36 families and 134 species. The sustain ability of paddy rice production systems can never be overestimated. Rice is part of the culture and even the heart of spiritual life in the area under the monsoon climate. Therefore paddy rice systems should be preserved with the highest priority being the enhancement of the systems' multi-function. As an outlook to future research, the need of joint and interdisciplinary research projects between economists and natural scientists at inland as well as international levels were emphasized in establishing the development of counter-measure logic through actual proofed analysis.

• 자원ㆍ환경경제연구
• /
• 제15권5호
• /
• pp.921-937
• /
• 2006

본 연구는 이산선택 조건부가치측정법에 내재되어 있는 응답자의 선호의 불확실성 문제를 퍼지이론을 통해 해결하려 한 것으로, 멸종위기에 처해 있는 한국산 토종반달곰의 보존에 대한 지불의사액을 추정하는 분석과정에 퍼지소속도 함수를 적용하였다. 퍼지소속도 이론은 애매모호한 상황의 불명확성을 추정하는 방법론으로, 이를 조건부가치측정법에 적용하면 해당 환경재에 대한 지불의사액과 응답자들의 진술에 대한 확신도를 동시에 도출해낼 수 있다. 본 연구를 위해 우리나라 7대 광역시에 거주하는 성인남녀 500명을 대상으로 설문조사를 시행하였으며 양분선택형 조건부가치측정법이 사용되었다. 한국산 토종반달곰 보존에 대한 지불의사액은 가구당 월 9,090원으로 계산되었으며 퍼지소속도함수로 계산된 응답의 확신도는 78%인 것으로 추정되었다.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.698-706
• /
• 2003

The primary goal of surface approximation is to reduce the degree of deviation of the simplified surface from the original surface. However it is difficult to define the metric that can measure the amount of deviation quantitatively. Many of the existing studies analogize it by using the change of the scalar quantity before and after simplification. This approach makes a lot of sense in the point that the local surfaces with small scalar are relatively less important since they make a low impact on the adjacent areas and thus can be removed from the current surface. However using scalar value alone there can exist many cases that cannot compute the degree of geometric importance of local surface. Especially the perceptual geometric features providing important clues to understand an object, in our observation, are generally constructed with small scalar value. This means that the distinguishing features can be removed in the earlier stage of the simplification process. In this paper, to resolve this problem, we present various factors and their combination as the metric for calculating the deviation error by introducing the orientation of local surfaces. Experimental results indicate that the surface orientation has an important influence on measuring deviation error and the proposed combined error metric works well retaining the relatively high curvature regions on the object's surface constructed with various and complex curvatures.