• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.179-188
• /
• 2009

WIG crafts are a high speed vessel with features of dynamic supported craft. These crafts, which are predominantly of light weight and operate any substantially greater speeds than conventional craft such as bulk carrier, tanker, container ship, etc., could not be accommodated under traditional maritime safety instruments. It means that there is the need for risk and safety levels to be assessed on a holistic basis, recognizing that high levels of operator training, comprehensive and thoroughly implemented procedures, high levels of automation and sophisticated software can all make significant contributions to risk reduction. To response this requirement, the Interim Guideline for WIG craft(MSC/Circ.1054) were developed in the view of the configuration of WIG craft, which fall between the maritime and aviation regulatory regimes. This paper reviews a safety assessment process and methodology to be used in the design phase of a new ship. The process and methodology is based on the risk-based approach and is applied to safety assessment in concept development phase of small WIG craft in the 20-person class.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.88-95
• /
• 2006

The resistance characteristics of a trimaran are studied, varying the bottom profile and transom stern of the main hull. The bottom profile is varied in three cases (convex, flat, concave). Using the experimental and numerical methods, the resistance performance of each hull form is compared. The experiments are carried out in ship model basin, and the numerical simulations are performed by a finite-difference method, based on the Marker and Cell scheme. Euler and continuity equationsare used for the governing equations of the flaw field around a trimaran with transom stern. The agreement of both results is good. The optimal bottom profiles for transom stern are presented for law-speed and high-speed regions, respectively.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.453-459
• /
• 2009

The DSME guide plate(GP) has been developed with the target to improve the cavitation and vibration performance when used with discharging cooling water around the outlet of LNG carrier. It was proven that it could as well be applied as a powerful wake control device on its own, even without discharging cooling water. However, it has to be taken into account that it inevitably results in speed loss. This study shows the possibility to design a GP which simultaneously improves both vibration and speed performance. The study intends to outline how to design the preliminary GP configurations from both the vibration and the speed performance points of view. Further, the study offers design guidance for the hull form and the propeller when adapting GP as a wake control device.

• 대한조선학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 1976

Using the computer programs for calculation of natural vibrations of ship's hull developed by the authors et al., an investigation into influences of various parameters on the accuracy of calculation was done through example calculations of a 30,000 DWT petroleum products carrier M/S Sweet Brier built by Korea Shipbuilding and Engineering Corporation. The methodical principles employed for the computer program development are as follows; (a) the ship system is reduced to an equivalent discrete elements system conforming to Myklestad-Prohl model, (b) the problem formulation is of transfer matrix method, and (c) to obtain solutions an extended $G\ddot{u}mbel's$ initial value method is introduced. The scope of the investigation is influences of number of discrete elements, choice of significant system parameters such as rotary inertia, bending stiffness and shear stiffness, and simplification of distributions of added mass and stiffness as trapezoidal ones referred to those of midship section on the calculation accuracy. From the investigation the followings are found out; (1) To obtain good results for the modes up to the seven-noded thirty or more divisions of the hull is desirable. For fundamental mode fifteen divisions may give fairly good results. (2) The influence of rotary inertia is negligibly small at least for the modes up to the 5- or 6- noded. (3) In the case of assuming either bending modes or shear modes the calculation results in considerably higher frequencies as compared with those based on Timoshenko beam theory. However, the calculation base on the slender beam theory surprisingly gives frequencies within 10% error for fundamental modes. (4) It is proved that to simplify distributions of added mass and stiffness as trapezoidal ones referred to those of midship section is a promising approach for the prediction of natural frequencies at preliminary design stage; provided good accumulation of data from similar type ships, we may expect to obtain natural frequencies within 5% error.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.47-58
• /
• 1994

본 논문에서는 천수역에 위치한 선박의 선형(線形) 조종성 계수를 추정하기 위한 이론적인 해석법에 대한 연구가 수행되었다. 세장체 이론을 사용하여 선체 주위의 유동을 모델화하였으며, 이로부터 물체 근처의 내부 유체 영역에서의 횡방향 유속에 대한 적 미분 방정식을 유도하였다. 이의 수치해법에 관하여 자세히 기술하였고, 특정 경우에 대한 이론해와 계산 결과를 비교하여 그 타당성을 검증하였다. 이 적 미분 방정식의 해를 이용하여 선체의 선형(線形) 조종성 계수를 추정할 수 있다. Mariner. Series 60, Wigley 선형에 대한 계산을 수행하였으며, 기존의 실험 결과와 비교하여 보았다. 조종 운동을 하고 있는 선체 주위의 복잡한 유동을 모델화하는 과정중에 포함된 여러 가지 가정에도 불구하고, 계산 결과는 실험 결과와 정성적, 정량적으로 잘 일치하며, 선박의 초기 설계 단계시 수심에 따른 기본적인 조종성 변화를 추정할 수 있을 것으로 생각된다.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.107-114
• /
• 1999

설계공리는 독립공리와 정보공리로 이루어졌는데, 독립공리를 이용하면 개념설계 단계에서 기능과 구조의 관계를 고려하여 설계의 기본적인 개요을 잡는데 유용하며, 구조가 결정이 된 후에 기능요구를 잘 만족시키기 위한 설계변수들의 결정과정에서, 설계의 정보량을 최소화하는 입장에서 정보공리를 이용함으로서 설계 시에 설계공리의 적용이 가능하리라 본다. 본 연구에서는 조선분야의 설계문제에 설계공리를 적용하여 봄으로써 설계공리의 응용 가능성을 고찰하였다. Thruster의 개념설계 예제에서는 독립공리를 사용하여 기능요구와 설계변수의 분석이 어떻게 이루어지는가를 보였고, 주기관 선정 예제에서는 대안들을 선택하는 방법으로 정보공리가 효과적으로 이용될 수 있음을 보였다. 또 설계변수의 선택과 변경량이 중요한 상사설계에서도 바지선의 예를 통하여 설계공리가 유용하게 쓰일 수 있음을 보였다. 그러나 초기에 제한조건과 기능요구를 모두 파악하기 어려워 점진적이며 반복적인 설계과정을 거치는 선박과 같은 대형 구조물인 경우에는 설계공리의 적용에 한계가 있음도 파악하였다.

• 한국지능시스템학회논문지
• /
• 제17권2호
• /
• pp.154-159
• /
• 2007

프로펠러 회전면에서의 반류분포는 주로 모형시험에 의해서 규명되어 왔다. 이렇게 축적된 데이터베이스를 통해 선박의 기하학적 형상정보와 반류분포 사이의 입출력관계를 모델링할 수 있다면 선박 초기설계시 유사선종의 설계에 도움이 된다. 뉴로퍼지시스템은 예측, 분류, 진단 등의 매우 복잡한 문제를 해결하는 기법으로 다양한 공학분야에서 응용되고 있다. 본 연구에서는 이들 입출력 사이의 관계를 뉴로퍼지시스템으로 모델링하고 학습한 후 새로운 입력에 대한 출력값의 검토를 통해 그 유용성을 확인한다. 3차원 선미형상을 입력으로 하고 선체 모형시험으로 얻어진 프로펠러 회전면에서의 반류분포 값을 출력으로 사용하여 학습 및 추론을 해 보았다. 이를 통해 뉴로퍼지시스템을 초기 선박설계 단계에서 특히 선미형상을 결정할 때 유용한 것을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.471-483
• /
• 2014

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 추계학술대회
• /
• pp.169-170
• /
• 2012

해상교통안전진단제도 도입('09.5.27) 이후 합리적 효율적인 제도 시행을 위한 노력은 계속되어 왔다. 하지만 최근에는 안전진단이 제대로 수행되고 있는지, 이에 의해 도출된 진단결과가 의미가 있는지 등 제도의 가치문제에 대한 논란이 이해당사자들을 중심으로 제기되고 있으며, 이러한 논의들은 진단에 대한 타당성 및 당위성을 찾지 못한 데서 기인하는 것으로 현 시점에서 제도에 대한 종합적이고 체계적인 검토를 통해 바람직한 제도를 정립해 나갈 필요가 있다. 본 연구에서는 평가에 대한 평가, 즉, 메타평가에 관한 이론을 적용, 문헌 연구와 전문가검토, 설문조사 등의 방법을 활용하여 안전진단의 분석 틀로서의 평가 모형을 설계하고, 검증을 통해 안전진단 평가에 적합한 메타평가 모형을 제시하였다. 본 연구결과가 해상교통안전진단의 메타평가 지표로서 활용되어 진단활동에 대한 전반적인 평가를 통해 제도 개선에 기여할 것으로 기대된다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권4호
• /
• pp.252-267
• /
• 2015

Offshore structures might encounter several environmental and operating conditions during their lifetime of several decades. In order to predict the dynamic behavior of offshore structures, several simulation cases should be considered to deal with all the combinations of ocean environments and operating conditions. Because a sophisticated time-domain coupled dynamic analysis requires an extremely large amount of computational time to handle all the possible cases, an efficient preliminary process to prescreen the probability of severe environmental conditions can be helpful in downsizing the number of simulation cases and computational effort. In this study, a prescreening procedure to reduce the number of environmental conditions for dynamic analyses of offshore structures is proposed. For the efficiency of the procedure, frequency-domain theories were adopted to estimate the platform offset, using quasi-static analyses in line tension prediction. The results were validated by comparing with those of dynamic analysis coupled between platform and mooring lines, and reasonable agreement was observed. In addition, the characteristics of environmental conditions classified to be severe to the system were investigated through the application of the developed prescreening scheme to several actual environmental conditions.