DOI QR코드

DOI QR Code

The Safety Assessment of Small WIG Craft in the 20-Passenger Class

20인승급 소형 위그선의 안전성 평가

  • Lee, Soon-Sup (Dept. of Naval Architecture, Gyeongsang National University) ;
  • Lee, Jong-Kap (Maritime & Ocean Engineering Research Institute, KORDI)
  • 이순섭 (경상대학교 해양과학대학 조선공학과, 해양산업연구소) ;
  • 이종갑 (한국해양연구원 해양시스템안전연구소)
  • Published : 2009.04.20

Abstract

WIG crafts are a high speed vessel with features of dynamic supported craft. These crafts, which are predominantly of light weight and operate any substantially greater speeds than conventional craft such as bulk carrier, tanker, container ship, etc., could not be accommodated under traditional maritime safety instruments. It means that there is the need for risk and safety levels to be assessed on a holistic basis, recognizing that high levels of operator training, comprehensive and thoroughly implemented procedures, high levels of automation and sophisticated software can all make significant contributions to risk reduction. To response this requirement, the Interim Guideline for WIG craft(MSC/Circ.1054) were developed in the view of the configuration of WIG craft, which fall between the maritime and aviation regulatory regimes. This paper reviews a safety assessment process and methodology to be used in the design phase of a new ship. The process and methodology is based on the risk-based approach and is applied to safety assessment in concept development phase of small WIG craft in the 20-person class.

Keywords

References

  1. Chun, H.H, 2000, 'A Study on Navy's Reinforcements and Characteristics of WIG Craft,' Bulletin of the Society of Naval Architects of Korea, Vol. 37, No. 2, pp. 37-63
  2. IMO, 2002a, Guidelines for FSA for use in the IMO rule-making process(MSC/Circ.1023)
  3. IMO, 2002b, Interim Guidelines for Wing-In-Ground (WIG) Craft (MSC/Circ.1054)
  4. Kang, K.J., Shin, M.S., Kim, Y.S. and Lee, S.S., 2007, Development of 20 Passenger Class WIG Ship-Public Report Stage 1, MOERI/KORDI Research Report
  5. Lee, J.K., 2004, 'Risk-based Approaches to the Safety in New Ship Design,' Proc. of the fourth Conference for New Ship and Marine Technology
  6. Lee, S.S., Lee, J.K. and Park, B.J., 2004, 'The Safety Assessment in Ship Design,' Proceeding of the Annual Autumn Meeting, SNAK, pp. 224-229
  7. Lee, S.S., Lee, J.K., Park, B.J. and Lee, D.K., 2005a, 'The Functional Hazard Assessment of WIG Craft in Conceptual Design,' Proceeding of the Annual Spring Meeting, SNAK, pp. 1439-1444
  8. Lee, S.S., Lee, J.K., Park, B.J. and Lee, D.K., 2005b, 'The Safety Assessment of WIG Craft using Commercial Software,' Proceeding of the Annual Autumn Meeting, SNAK, pp. 500-505
  9. Petersen, U. and Braasch, W., 2001, Application of Safety Assessment Process to WIG Craft
  10. SAE International, 1996, Guideline and Methods for Conducting the Safety Assessment Process on Civil Airborne System and Equipment
  11. U.S. DoD, 2000, MIL-STD-882D Standard Practice for System Safety Program Requirement