• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.68-73
• /
• 2014

Research is being carried out at Korea Aerospace Research Institute with aim of design a HALE UAV(High Altitude Long Endurance Unmanned Air Vehicle). HALE UAVs are ideally suited to provide surveillance, remote sensing and communication relay capabilities for both military and civilian applications. HALE UAVs typically cruise at an altitude between 15 km and 20 km, travelling at low speed and circling specific area of interest. Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. High modulus CFRP(Carbon Fiber Reinforced Polymer) has been used in designing the structure in order to minimize the airframe weight. With respect to structural design and analysis, the key question is to decide an adequate airworthiness certification base to define suitable load cases for sizing of various structural components. In this study, FAR(Federal Aviation Regulation) 23 have constituted the guidance and benchmark throughout all structural studies. And the MSC/FlightLoads was introduced to analyze the flight loads for the HALE UAV. The MSC/FlightLoads can compute the flexible air load and analyzed loads are distributed on structural model directly. A preliminary structural concept was defined in accordance with the estimated inertial and aerodynamic loads. A FEM analysis was carried out using the MSC/Nastran code to predict the static and dynamic behaviour of UAV structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.296-302
• /
• 2019

In this study, a basic durability assessment was performed by selecting the main part of a trial product of a shale shaker, which is one of components for a mud circular system. For a preliminary durability assessment, it was assumed that the lifetime of the bearing for the vibrator motor and the stiffness of the support spring are affected by the vibration when the motor operates continuously. In the case of the motor, the initial p-p level was 0.72 g, but after 100 hours of operation, the p-p level was rapidly increased to 1.26 g. Bearing defects could be estimated through ball defect frequency analysis. In the case of the spring, the stiffness of the spring was reduced by approximately 3.78% at the end of 2,000 hours of the fatigue-durability test by applying excitation conditions to shale shaker body. In the future, we will analyze the influence of the particle removal efficiency of the shale shaker.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.450-457
• /
• 2020

Background: The production of glass beads in Ghana is greatly impacted by the ingenuity of Ghanaian women. Preliminary investigations revealed the lack of interest on the part of women due to poor working conditions as a result of the influence of culture-specific silence. Therefore, the study investigated the poor working conditions faced by these industrious women with the ultimate goal of suggesting ways they can be empowered. Methods: A phenomenological study was conducted in two indigenous glass bead communities in Ghana. Data were solicited via direct observations, personal interviews and focus group discussions. Twenty-six purposively sampled respondents were recruited for the study. Data from the study were analyzed using Interpretative Phenomenological Analysis. Results: The results confirmed that the elderly women glass bead makers are much influenced by the Ghanaian culture of silence. This prevents the women from speaking about the challenges they are facing in their work. Also, the women are silenced because of the fear of losing their jobs as well as the reluctance of their male managers to remedy the challenges they encounter in the course of work. This has resulted in poor remuneration, lack of insurance packages for workers, certification, and absence of personal protective tools for the women. Conclusion: The study tasks the government of Ghana, the Legal Advocacy for Women in Africa (LAWA), the Fair Wages and Salaries Commission in Ghana, the Ghana Trade Union as well as the Local Government Workers' Union to empower the women to sustain the glass bead industry in Ghana.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.331-346
• /
• 2018

In the tunnel of domestic high - speed railway, the main fire - fighting facility, fire - extinguishing passageway, is installed. However, due to the high pressure of the high - speed train, frequent breakage and maintenance are caused by strong shock and long - term vibration. In order to solve these problems, it is necessary to improve the fire door, but in Korea, it is installed by submitting a certificate by simple KS F 2296 performance test. At present, it is developed as a simple test certification by producing a real scale fireproof door without the theoretical examination in advance, so that a high cost for improvement is occurring in Korea. Therefore, through this study, structural analysis study which can preliminary structure review was carried out in order to design the refuge connection passage fire door and to improve the performance improvement. In order to secure the reliability of the result value, the official authentication test (KS F 2296) were compared.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.256-266
• /
• 2019

There are many different job skill evaluation scales, but the development of the job skill scale for the workers in the local child care centers has much to be improved. The purpose of this study is to develop and validate the job skill scales for the workers of local child care centers. It is also the purpose of this study to specify the scope of work for such workers and define the job skills to develop a tool to evaluate the job skills of them, eventually. As for the study method, the researcher conducted literature review and Delphi survey to extract the job skill factors. Then, after going through a discussion with an expert, the researcher developed the preliminary questions to verify the validity of the contents and the certification validity. For this, a survey was conducted with the workers in local child care centers across the country, and a total of 221 questionnaires have been used for analysis. With this, a total of five job skill factors for such workers were identified, based on which 20 questions were developed to constitute the scale. The sub-factors identified were student supervision, program planning, child education, administrative works, and link-up with the local community. The confidence level of the scale developed in this study was Cronbach ${\alpha}=.940$(N=221). With the scale of the job skills of the workers in local child care centers, it would be possible to develop various job skill programs. And, this would be able to be used for evaluating the job skill levels of not only the workers in the local child care centers but also other child-care service providers.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.65-75
• /
• 2021

When the decommissioning of South Korea nuclear power plants is promoted in earnest with the permanent shutdown of Kori Unit 1 in 2017, a large amount of various types of radioactive waste will be generated. For minimal generation and safe management of decommissioning waste, the waste should be made by appropriate classification of the dismantling waste characteristics in accordance with physical, chemical and radiological characteristics to meet the acceptance criteria of disposal facilities. Replacing the preliminary inspection at the site for the compliance of the waste acceptance criteria (WAC) of medium and low-level radioactive waste with the generator's own radioactive waste certification program (WCP), from the perspective of disposal, the optimization of waste management at the national level contributes to the efficient availability of disposal, such as the processing of non-conforming radioactive wastes at the site. To this end, it is important to evaluate radioactivity in each system and area such as nuclear reactors before decommissioning is carried out in earnest, and the prior removal of harmful wastes is important. From waste collection to waste disposal, decommissioning waste should be managed at each stage in consideration of the acceptance criteria of disposal facilities to minimize the generation of non-conforming waste.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.677-684
• /
• 2022

This study is a basic study to evaluate the ecological environment of Changwon City. The study site was 6 ecotourism districts in Changwon-si, and the ecotourism index was evaluated through direct visits and interviews with the person in charge through preliminary research and various literature data from June to July 2021. There are six ecotourism indicators: climate crisis, air quality improvement, water conservation, natural coexistence, citizen participation, and tourism resource management. When looking at the scores for the six ecotourism areas in Changwon, it received the highest score in the areas of natural coexistence and air quality improvement. However, the ecoregion received the lowest score in the water resource conservation category, indicating that the water resource conservation as a whole was weak. Next, tourism resource management, climate crisis, and citizen participation are at the same level in all regions. As a result of the evaluation through the low-carbon ecotourism index, the Changwon City low-carbon ecotourism certification system should first be operated as a measure to revitalize the ecotourism region. It is necessary to prepare a low-carbon ecotourism level for Changwon City. Second, it is very important to guide and promote ecotourism areas to revitalize ecotourism areas. Lastly, to operate a sustainable eco-environment area, it is necessary to operate using local governance above all else.

• 재활복지
• /
• v.15 no.4
• /
• pp.351-375
• /
• 2011

The purpose of this study is to research the actual condition of on-line and off-line computer education in order to create more opportunities for the possibility of effective learning and u-Learning - based IT vocational education development of persons with hearing impairments. To carry out this study, we had a preliminary education of this study for a sign language interpreters who had working in a association of the deaf in Daegu, and had conducted a survey study participating for 100 persons with hearing impairments living in Daegu-Kyungbook Region. The results of this study were as follows: First, during on-line and offline education environment for persons with hearing impairments, factors such as teaching methods and contents, screen organization, learning effects, offering lecture material and subtitle, subtitle and sign language video of position and size, offering computer instructor who have a sign language interpreter with IT mentoring, on-line educational user environment setting must be considered factors for u-Learning - based IT vocational education development. Second, 74% of the subjects showed their interest in taking a course, after u-Learning contents are developed for persons with hearing impairments. Third, the subjects preferred IT device was a tablet PCs and IT certification related courses as their IT vocational education curriculum. Also, to link between professional training and job opportunity, subjects will need a IT vocational education courses such as computer intermediate and advanced levels.

• Journal of agricultural medicine and community health
• /
• v.29 no.1
• /
• pp.65-75
• /
• 2004

Objectives: Immunizations have been one of the most effective measures preventing from infectious diseases. It is quite important national infectious disease prevention policy to keep the immunizations rate high and monitor the immunizations rate continuously. To do this, Korean CDC introduced the National Immunization Registry Program(NIRP) which has been implementing since 2000 at the Public Health Centers(PHC). The National Immunization Registry Program will be near completed after sharing, connecting and transfering vaccination data between public and private sector. The aims of this study was to evaluate the immunization module of non-chart system in private clinic with health information system of public health center(made by POSDATA Co., LTD) and immunization registry program(made by BIT Computer Co., LTD). Methods: The analysis and survey were done by specialists in medical, health field, and health information fields from 2001. November to 2002. January. We made the analysis and recommendation about the immunization module of non-chart system in private clinic. Results and Conclusions: To make improvement on immunization module, the system will be revised on various function like receipt and registration, preliminary medical examination, reference and inquiry, registration of vaccine, print-out various sheet, function of transfer vaccination data, issue function of vaccination certification, function of reminder and recall, function of statistical calculation, and management of vaccine stock. There are needs of an accurate assessment of current immunization module on each private non-chart system. And further studies will be necessary to make it an accurate system under changing health policy related national immunization program. We hope that the result of this study may contribute to establish the National Immunization Registry Program.