• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.42-48
• /
• 2016

In order to investigate the utilization of the Omija (Schizandra chinensis Baillon) extract as a natural coagulant for manufacturing soybean curd, the quality characteristics of white (Baktae) and black (Seoritae) soybean curds, coagulated by the Omija extract or $MgCl_2$, were evaluated. Crude protein ($6.14{\pm}0.30$ and $6.25{\pm}0.18%$, respectively) and crude lipid ($10.86{\pm}1.74$ and $11.29{\pm}1.69%$, respectively) contents of white and black soybean curds coagulated using the Omija extract were higher than those coagulated using $MgCl_2$. Black soybean curds coagulated using the Omija extract showed higher L, a, and b values than those using $MgCl_2$. The most abundant amino acid in white and black soybean curds coagulated using the Omija extract was arginine (3.74 and 3.71 mg/100 g, dry basis, respectively). The amounts of Ca, K, Mg, and Na were the highest in both soybean curds prepared with the Omija extract. The sensory evaluation (color, flavor, taste, texture, and overall preference) showed that white and black soybean curds coagulated using the Omija extract were more preferred than those produced using $MgCl_2$. The results suggested that using the Omija extract as a natural coagulant agent could improve the quality and sensory characteristics of soybean curds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.52-57
• /
• 2003

Nutritional compositions of the raw materials, such as well-milled rice, milled upland glutinous rice, milled barley, glutinous millet, SoRiTae, red beans and mung beans were analysed, and cooking characteristics and sensory attributes of mixed cereals were measured. Crude protein and crude fat in SoRiTae were 31.6% and 16.16%, respectively, and the highest among the raw materials. Crude ash was 3~11 times higher and crude fiber was 5~7 times higher in legumes than in grains. Iron content in SoRiTae was the highest as 7.8 mg/100 g, and calcium content was the highest as 71.0 mg/100 g in SoRiTae and mung beans. Phosphorus content was higher in glutinous millet and mung beans, and potassium content was greatly higher in legumes than in grains and the highest as 934 mg/100 g in red beans. Vitamin B$_1$ and B$_2$ contents were higher in legumes than in grains, and niacin content was the highest as 5.51 mg/100 g in mung beans and was 3.77 mg/100 g in glutinous millet. Water uptake of the raw materials increased greatly after 5 min of soaking in water and then stayed at the almost same level. Water uptake was the highest in SoRiTae and decreased in the order of milled barley, milled upland glutinous rice, glutinous millet and well-milled rice. Hardness was the lowest as 142.8 g/cm$^2$ in cooked SoRiTae, and the highest as 206.3 g/cm$^2$ in cooked milled barley compared with 169.4 g/cm$^2$ in cooked well-milled rice. Cooking time increased and hardness of cooked mixed cereals decreased with the increase of water added. Moisture content decreased, while crude protein, crude ash and crude fiber increased as the increase of mixing ratio of SoRiTae and red beans in mixed cereals. Lightness decreased, while red and blue color increased, and hardness increased with the increase of mixing ratio of SoRiTae and red beans. Sensory evaluation showed greater preference in terms of color, roasted nutty, sweet taste and overall acceptance in the cooked mixed cereals with 8 and 10% of SoRiTae and red beans.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.596-604
• /
• 1996

This study was carried out to offer the successive method of cultivation and increase the productivity of mushroom yield with good quality through the elevation of rate of spawn development for Lentinus edodes. Studied about the analysis of current management of actural cultivation, a base of these, researched and presented for the upward method of productivity through an experiment of the high rate of spawn development and cultivation, putting first cultural environment. The results obtained were as follows ; 1. As the result of the analysis of current management in actural cultivation, many cultivators had a tendency to neglect managements of cultivation. These were reason for the deficiency of labour, funds and the lack of knowledge of cultivation, etc. 2. Water contents in bed logs according to the date of inoculation was shown as the decreasing order of 28.63%(3/12), 25.20%(3/25) and 23.19%(4/10). For the purpose of the maintenance of the water contents, the full-development of mycelium in bed logs and the dispersion of labour, the date of inoculation should be started in the early March. 3. The difference of the rate of spawn development among species was not shown, 100%(Mori 465). 98.98%(Mori 3046) on the spawn in high temperature and 98.97%(Mori 290) on the spawn in low temperature. The relative rate of spawn development was 97.70%(Mori 465), 82.45%(Mori 3046) on the spawn in high temperature and 88.87%(Mori 290) on the spawn in low temperature, it showed the difference. The spawn should be selected carefully in the future, as the spawn of cultivater's preference showed the difference for the development of mycelium. 4. The rate of spawn development following the date of inoculation was 100.0%(3/12), 98.98%(3/25) and 96.79%(4/10) on the spawn in high temperature and 99.09%(3/12), 98.97%(3/25) and 97.89% (4/10) in low temperature, it showed little difference. And the relative rate of spawn development was 97.70%(3/12), 82.45%(3/25) and 81.42%(4/10) on the spawn in high temperature and 93.27%(3/12), 89.67%(3/25) and 88.87%(4/10) that in low temperature, As the result of the relative rate, the time of inoculation of spawn should begin in the early March. 5. The height of stock logs on temporary placing should be less than 60cm at most on the surface, because of the low rate of water contents.

• Korean Journal of Ichthyology
• /
• v.25 no.2
• /
• pp.90-105
• /
• 2013

This study was performed to find out stomach contents of cold water fish such as Manchurian trout (Brachymystax lenok tsinlingensis) and River salmon (Oncorhynchus masou masou) in the Odae mountain area. Field survey was carried out 3 times by each season from May to October 2012 along the Gyebang stream and the Yangyang-Namdae stream at north-west mountain slope and north-east mountain slope of the Odae mountain area respectively. The result of digestive track analysis showed that food species of Manchurian trout were total individuals of 645 including 5 orders, 23 families, 39 species of benthic macroinvertebrates and 11 taxa of terrestial insects. And each IRI (Index of Relative Importance, %) value of food species by Manchurian trout was terrestial insects 37.0%, Trichoptera 36.4%, Ephemeroptera 20.0%, Diptera 3.9%, Plecoptera 2.7%, and Gordea <0.1%. While the River salmon fed on 1,186 individuals covering 4 orders, 20 families, 33 species of benthic macroinvertebrates and 6 taxa of terrestial insects including arachnid. Also IRI values by River salmon were terrestial insects including arachnid 2.7%, Ephemeroptera 52.9%, Trichoptera 27.9%, Diptera 9.4%, and Plecoptera 7.0% respectively. With these results, we might say that both Manchurian trout and River salmon is carnivorous fish which display the feeding preference to terrestial insects and benthic macroinvertebrates. As a results we could find out that the two kinds of cold water fish preferred similar habitat types and liked same order of food species in same season, however the compositions of food species for Manchurian trout and River salmon were considerably different.

• Journal of agricultural medicine and community health
• /
• v.42 no.3
• /
• pp.119-131
• /
• 2017

Objectives: The purpose of this study was to compare the diabetic management indicators between agriculture, forestry, and fishery workers (AFF) and other occupational adults (non-AFF) in community-dwelling diabetes. Methods: The study population consisted of 22,127 diabetic population ${\geq}19years$ who participated in the 2015 Community Health Survey. Chi-square test and logistic regression analysis was used to compare the diabetic management indicators between AFF and non-AFF. Socioeconomic characteristics such as age, gender, education level, monthly household income, National Basic Livelihood Security status, and marital status was sequentially adjusted. Results: Among total diabetic population, 3,712 people (16.8%) was AFF and 18,415 people (83.2%) was non-AFF. The fully-adjusted odds ratio [OR] (95% confidence interval [CI]) of current non-medical treatment (0.72, 0.66-0.79), measurement of hemoglobin A1c (0.61, 0.55-0.67), screening for diabetic retinopathy (0.76, 0.70-0.83), screening for diabetic nephropathy (0.75, 0.70-0.81), non-alcoholic or moderate drinking (0.70, 0.64-0.78), nutrition label reading (0.83, 0.71-0.98), low salt preference (0.85, 0.78-0.93), dental examination (0.60, 0.54-0.66), scaling experience (0.84, 0.77-0.93), regular toothbrushing (0.66, 0.58-0.76), and diabetes management education (0.84, 0.77-0.92) was significantly lower in AFF compared to non-AFF. In contrast, the fully-adjusted OR (95% CI) of AFF's low stress level (1.39, 1.26-1.52) and adequate sleep duration (1.22, 1.13-1.32) was significantly higher than non-AFF, which are better indicators of diabetic management in AFF. Conclusions: Overall, the level of diabetes management of AFF was not as good as that of non-AFF. In order to improve the level of diabetes management of AFF, a delicate diabetes intervention strategy considering the occupational characteristics of AFF will be needed.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.840-845
• /
• 2007

The chromaticity, mechanical, and sensory properties of madeleine were investigated during its manufacturing process based on additions of black bean chungkukjang flour containing functional health ingredients and a high nutritient value. 1. The moisture content decreased with increasing content of the chungkukjang flour$(16.1{\sim}13.7%)$. 2. The brightness of the Madeleine decreased significantly from 75.24 to 53.61 by increasing the content of the black bean chungkukjang flour. The degree of red color increased significantly from -0.31 to 4.93 by increasing the content of the black bean chung kukjang flour. 3. For the mechanical properties, the hardness increased significantly with increasing amounts of the black bean chungkukjang flour (p<0.05). The degree of fracturability, adhesiveness, and gumminess also increased with the increasing the content, but the fracturability showed no difference by either addition. The springiness and cohesiveness decreased significantly by increasing the content of the black bean chungkukjang flour, showing an opposite result compared to the hardness. 4. The results of the sensory evaluation indicated significant differences in color among the samples(p<0.05). The color of the madeleine samples with added black bean chungkukjang flour was more preferred than that of the sample without any additive. The degree of preference increased in the order of the quantity of the additive. The moistness and softness became significantly drier and less soft, respectively, with an increasing quantity of the black bean chungkukjang flour (p<0.05). For the overall acceptance, the BC10 sample added with 10% of black bean chungkukjang flour added had the highest acceptance. This may be because it did not have a strong chungkukjang odor and had the fewest differences from the control Madeleine without the additive, in terms of its moistness and softness. Based upon these results, adding10 % of black bean chungkukjang flour in the manufacture of Madeleine is an appropriate quantity with regard to its structural and sensory characteristics.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.834-839
• /
• 2007

This study was designed to determine the optimal ratio of dropwort powder in castella by adding the powder at levels of 0, 3, 6, 9, and 12% respectively. The properties of the castella were analyzed by specific gravity, specific volume, color determinations, texture properties and sensory evaluation. The Specific gravity increased with increasing amount of dropwort powder. However, the specific volume decreased with increasing dropwort powder. For the color values, as more dropwort powder was added, the L-value decreased. The castella with 9% dropwort powder had a higher hardness, gumminess, and chewiness. A sensory panel perceived that the external and internal color of the castella become darker with the dropwort powder substitution and the grain size decreased with increasing amount dropwort powder, while sweet taste showed no significant difference. The order of overall preference was DP 9>DP 6>DP 12>CON>DP 3. Therefore, the substitution of 9% of wheat flour with dropwort powder was recommended in the production of castella.

• KSBB Journal
• /
• v.24 no.2
• /
• pp.156-162
• /
• 2009

We examined saury, herring, gizzard shad kwamaegi to measure of microbic contamination rate of kwamegi that are sold in the market now. In the total bacteria, staphylococcus, peroxide value, and microorganisms is inhibited that from sample that we treated a substance with chitosan-ascorbate (CA) and other orders deep water (DW), ginseng steamed red and wine (GRW), NT (not treated). When we compared between SGRW and SNT, SCA show us more inhibition effect 0.22-0.49 log cycle in the total aerobacter. When we compared between HDW and HNT, HCA restraint 0.05-0.45log cycle, and when we compared between GDW and GNT, GCA inhibited 0.45 log cycle. In the coliform and E. coli, growths of microorganisms were inhibited followed order by treatment of CA, NT, and DW. GDW, HCA and HNT checked enough amount of water from the moisture measurement; but SGW, GCA, HEW and SCA showed 7-15% lack of moisture, and SNT and GNT have 10% more moisture. Peroxide value is changed to 41-51meq/kg when we did treat CA in there and a side that didn't add antimicrobial expressed the result numerically that 56-58meq/kg. In the sensory evaluation, customer gave preference to followed by Saury kwamaegi, herring, and gizzard shad kwamaegi. We have a point of view when kwamaeki manufactured if we add natural antibiotic and it uses to vacuum drying, we would inhibited of multiplication of microorganism, and of peroxides.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.53-63
• /
• 2010

The purposes of this study are to classify the characteristics of parks by park use patterns and the understanding of design concepts and to analyze the difference of cognition of design concept between designers and park users. The literature studies and surveys were performed to analyze park use patterns and understanding of design concepts for Seoul Forest Park, Yeouido Park and Seonyudo Park. Several statistical methods have been used such as descriptive analysis and importance-performance analysis. The results of this research are as follows. As the results of an analysis of park use patterns, Seonyudo Park may he qualified as an urban landmark park, while Yeouido Park can he classified as a neighborhood park. Seoul Forest Park bas characteristics of both. Second, the higher frequency of visits generally leads higher preference. Third, the overall cognition of the design concepts of parks shows 3.51 on average, which is comparatively high. The functional concepts are better transmitted to the users compared to abstract concepts. The cognition of the design concepts of each park are evaluated in the higher order of Seonyudo Park, Seoul Forest Park and Yeouido Park. Fourth, the cognition levels of detailed design concepts for each place are lower than the overall design concepts. On the other hand, levels of satisfaction are increased after the design concepts are noticed. It would he necessary make the effort to give information about the design concept of each space. The results of this study are limited in that it covers only three parks in Seoul, and did not consider seasonal variables. Nevertheless, this study may he significant in that it dealt with the cognition of design concepts for urban parks, focusing on the difference between designers and visitors.