• The KIPS Transactions:PartB
• /
• v.11B no.4
• /
• pp.465-470
• /
• 2004

Web Information Predictive Systems have the restriction such as they need users profiles and visible feedback information for obtaining the necessary information. For overcoming this restrict, this study designed and implemented Dynamic Web Information Predictive System using Ensemble Support Vector Machine to be able to predict the web information and provide the relevant information every user needs most by click stream data and user feedback information, which have some clues based on the data. The result of performance test using Dynamic Web Information Predictive System using Ensemble Support Vector Machine against the existing Web Information Predictive System has preyed that this study s method is an excellence solution.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.482-485
• /
• 1996

In this paper, a predictive current control of 12-pulse parallel connected dual converter system without interphase reactors(IPR) is presented. Firstly, the characteristics of system without IPR are analyzed and compared with that of system with IPR. And the predictive current control of this system is discussed. Finally the validity of the presented system and the excellence of the predictive current control response is proved through the simulation results.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.20-28
• /
• 2005

This paper presents a fuzzy predictive sliding mode control for high performance induction motor position drives. A new simplified inner-loop sliding-mode current control scheme based on a nonlinear mathematical model of an induction motor is introduced. Novel predictive fuzzy logic PI and PID controllers are used in speed and position loops, respectively. Sliding-mode current controllers and fuzzy predictive logic controllers are designed based on indirect vector control. The overall system performance is examined under different dynamic operating conditions. The performance of the drive system is robust and stable, and insensitive to parameters and operating condition variations even though non-exact system parameters are used in the implementation of the proposed controllers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.34-42
• /
• 2006

As many systems depend on electronics, concern for fault tolerance is growing rapidly. For example, a car with its steering controlled by electronics and no mechanical linkage from steering wheel to front tires(steer-by-wire) should be fault tolerant because a failure can come without any warning and its effect is devastating. In order to make system fault tolerant, there has been a body of research mainly from aerospace field. This paper presents the structure of predictive smoothing voter that can filter out most erroneous values and noise. In addition, several numerical simulation results are given where the predictive smoothing voter outperforms well-known average and median voters.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.278-282
• /
• 1989

A Digital P.I.D Predictive Controller is applied to the various types of D.C drives. The system with predictive controllers is compared to the system with conventional P.I.D controllers. The effect of the predictive control for the practical applications are investigated. The stability of the system with predictive controllers is also studied.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.407-422
• /
• 2004

A new method for the design of predictive controllers for SISO systems is presented. The proposed technique allows uncertainties and constraints to be concluded in the design of the control law. The goal is to design, at each sample instant, a predictive feedback control law that minimizes a performance measure and guarantees of constraints are satisfied for a set of models that describes the system to be controlled. The predictive controller consists of a finite horizon parametric-optimization problem with an additional constraint over the manipulated variable behavior. This is an end-constraint based approach that ensures the exponential stability of the closed-loop system. The inclusion of this additional constraint, in the on-line optimization algorithm, enables robust stability properties to be demonstrated for the closed-loop system. This is the case even though constraints and disturbances are present. Finally, simulation results are presented using a nonlinear continuous stirred tank reactor model.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.1016-1023
• /
• 2013

Predictive current control offers the potential for achieving more precise current control with a minimum of distortion and harmonic noise. However, the predictive method is difficult to implement and has a greater computational burden. This paper introduces a theoretical analysis and experimental verification for an improved predictive current control technique applied to single phase grid connected voltage source inverters (VSI). The proposed technique has simple calculations. An ATmega1280 microcontroller board is used to implement the proposed technique for a simpler and cheaper control system. To enhance the current performance and to obtain a minimum of current THD, an improved tri-level PWM switching strategy is proposed. The proposed switching strategy uses six operation modes instead of four as in the traditional strategy. Simulation results are presented to demonstrate the system performance with the improved switching strategy and its effect on current performance. The presented experimental results verify that the proposed technique can be implemented using fixed point 8-bit microcontroller to obtain excellent results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.329-332
• /
• 1997

This paper deals with the attitude control problem of nonlinear MIMO propeller setup. Multivariable GPC[Generalized Predictive Control] is adopted as the main controller, and it is implemented by TMS320C31 in the current paper. The main object of control is to move the propellers to wanted positions. System identification is performed to configure the system. Performance of the multivariable predictive controller implemented is shown via some experiments, which shows the controller meets the adequate control purpose.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.101-105
• /
• 1998

A large system predictor, which can perform prediction of sales trend in a huge number of distribution centers, is presented using neural predictive model. There are 20,000 number of distribution centers, and each distribution center need to forecast future demand in order to establish a reasonable inventory policy. Therefore, the number of forecasting models corresponds to the number of distribution centers, which is not possible to estimate that kind of huge number of accurate models in ERP (Enterprise Resource Planning)module. Multilayer neural net as universal approximation is employed for fitting the prediction model. In order to improve prediction accuracy, a sequential simulation procedure is performed to get appropriate network structure and also to improve forecasting accuracy. The proposed simulation procedure includes neural structure identification and virtual predictive model generation. The predictive model generation consists of generating virtual signals and estimating predictive model. The virtual predictive model plays a key role in tuning the real model by absorbing the real model errors. The complement approach, based on real and virtual model, could forecast the future demands of various distribution centers.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.1027-1038
• /
• 2006

There are many technical problems in the recommendation system based on very large database(VLDB). So, it is necessary to study the recommendation system' structure and the data-mining technique suitable for the large scale Internet shopping mail. Thus we design and implement the product recommendation system using k-means clustering algorithm and sequential pattern technique which can be used in large scale Internet shopping mall. This paper processes user information by batch processing, defines the various categories by hierarchical structure, and uses a sequential pattern mining technique for the search engine. For predictive modeling and experiment, we use the real data(user's interest and preference of given category) extracted from log file of the major Internet shopping mall in Korea during 30 days. And we define PRP(Predictive Recommend Precision), PRR(Predictive Recommend Recall), and PF1(Predictive Factor One-measure) for evaluation. In the result of experiments, the best recommendation time and the best learning time of our system are much as O(N) and the values of measures are very excellent.