• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.171-175
• /
• 2009

One of the critical issues associated with the 40mm long hollow cylinder's development and maintenance is the prediction of cylinder erosion. The actual firing test is the most accurate method to measure the cylinder erosion rate. But it costs a great deal and requires a long measurement time. Hence many empirical methods have been proposed to predict the erosion rate and life span of long hollow cylinders. An EFC formula is calculated. An approximate erosion formula for the ammunition type A is derived to interpolate 16 observation values up to 4,000 rounds. A new erosion equation and muzzle velocity formula are also suggested. Several numerical results are presented.

• 산업경영시스템학회지
• /
• 제22권51호
• /
• pp.53-61
• /
• 1999

평균치에 적용되는 credibility formula를 분산에도 적용하여 응용 할 수 있는 extended credibility formula를 개발한다. 간단한 베이지안 신뢰도 예측모형을 구축하고 이 모형에 extended credibility formula를 적용한다. 감마 사전분포 - 포아송 우도의 경우와 베타 사전분포 - 이항분포 우도의 경우에 대해 extended credibility formula를 적용해 관측치에 주어진 가중치에 따라 사후 분산이 어떻게 변화하는지를 분석한다. 사후분산도 사후평균과 마찬가지로 사전값과 관측값의 가중평균으로 표시될 수 있다는 것을 증명한다. 가중치와 불확실성 감소율간의 관계도 연구된다. 이와 같은 가중치에 따른 사전 및 사후분포의 변화 양식에 대한 이해는 올바른 사전분포를 설정하는데 큰 도움이 될 수 있다.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1475-1484
• /
• 1997

A new empirical formula for instantaneous heat transfer coefficients was determined. The determination of this formula is in need for prediction of instantaneous value of heat transfer coefficients to analyze in more detail the time variation of heat transfer rate from gas to wall in combustion chamber of a spark ignition engine. As the result, following formula was determined. h=687 $p^{0.75}$ $U^{0.75}$ $D^{0.25}$ - $T^{-0.465}$ U(.theta.)=O.494 $V_{p}$ +0.73*10$^{6}$ (1.35 p dV/d.theta.+V dp/d.theta.) Using this empirical formula, the instantaneous heat transfer coefficients of gas in the combustion chamber of spark ignition engine was predicted and compared with experimental values.

• Journal of Pharmaceutical Investigation
• /
• 제20권2호
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Structural Engineering and Mechanics
• /
• 제9권4호
• /
• pp.365-374
• /
• 2000

The structural behavior of connections between concrete-filled rectangular tubular column (CFRT column) and steel beam has been studied in this paper through sub-assemblage loading tests. It is found that the sub-assemblages exhibit ductile restoring force characteristics under seismic loading. A formula for the prediction of the yield strength of each member in the connection is proposed by using the yield line theory under the assumption of a simple stress transfer mechanism. It is shown that the proposed formula can produce a reasonable prediction while providing a basis for further investigation.

• 한국전자파학회논문지
• /
• 제8권3호
• /
• pp.289-296
• /
• 1997

본 논문에서는 대표적인 희절공식들을 살펴보고, 쐐기 형태의 구조물에 대한 희절손실 예측치를 비교해 모았다. 또한 시뮬레이션 결과를 측정치와 비교, 분석하였다. 은 산란체가 의절체 부근에 존재하는 실제 환경에서 수직편파에 대한 의절손실은 단순한 knife-edge 공식이 측정치와 잘 일치하였다. 일치하였다.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.81-88
• /
• 2003

Recently, pile foundations were constructed in rough or soft ground than ground of well condition thus it is important that prediction of ultimate bearing capacity and calculation of proper safety factor applied pile foundation design. This study were performed to dynamic loading tests for the thirty two piles at four different construction sites and selected pile at three site were performed to static loading tests and then compare with measured value and value of static and dynamic loading tests. The load-settlement curve form the dynamic loading tests by CAPWAP was very similar to the results obtained from the static load tests. Based on dynamic and static loading tests, the reliability of pile-driving formula were analyzed and then suggested with proper safety factor for prediction of allowable bearing capacity in this paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2014

Since consists of regression equation by penetration depth prediction calculated by existing NDRC formula mainly considers properties of projectile, impact velocity, compressive strength as parameter, it is difficult to apply it to fire reinforced concrete. In this study, scabbing limit thickness was predict considering fiber reinforcement effect by local fracture of concrete was evaluated through high-velocity impact test. As a result of applying fracture reduction coefficient to NDRC, it was possible to predict scabbing limit thickness of fiber reinforced concrete similarly with actual measurement.

• 대한조선학회논문집
• /
• 제31권2호
• /
• pp.29-37
• /
• 1994

본 논문에서는 선박 추진축계의 정확한 임계속도 추정을 위한 모델링방법 및 해석방법을 제시하였다. 해석방법으로서는 전달행렬법을 사용하여 추진축의 임계속도 및 선회운동응답을 구하였다. 또한, Jasper식과 Panagopulos식 등과 같은 간이 추정식들의 타당성을 검증하기 위하여 수치계산을 수행하였다. 일반적인 선박 추진축계에 대한 수치계산 결과로부터 축의 임계속도는 저어널베어링의 위치 및 지지조건에 민감함을 알 수 있었다.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.112-118
• /
• 1994

본 연구에서는 선박의 초기 설계시에 비교적 간단한 자료로 각 선실에서의 소음수준을 예측하기 위한 방법으로 다중 회귀 분석법에 근거한 통계적 접근을 시도하였다. 선실에서의 소음수준에 영향을 미치는 여러 변수중에서, 선종, 재화중량, 주기관과 선실의 위치, 거주구 형상, 선실의 종류 및 프로펠러 스큐등이 최종 회귀식에 포함되었다. 회귀식의 추출시 사용하지 않은 6척 210개 선실에 대하여 검증을 실시한 결과, 77%의 선실이 3 dB 이내의 오차범위에 있음을 확인하였다.