• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1810-1814
• /
• 2008

A small L-type megasonic module for nano-pattern cleaning was designed and manufactured. The impedance graph of the quartz waveguide with a piezoelectric actuator was predicted using finite element method (FEM). The peak value of the piezoelectric actuator alone was 3.373 MHz, which was the same as the experimentally measured value of 3.373 MHz (0.0% error). In addition, the maximum impedance value of the quartz waveguide with the actuator was 3.373 MHz, which agreed well with the measured value of 3.362 MHz (0.3% error). The acoustic pressures of a conventional megasonic system (3 MHz) and the developed system under similar conditions were measured and compared. The results showed that the maximum values and standard deviations of the developed system decreased by 29% and 18%, respectively, compared with the conventional type. This suggests that the small L-type would have higher particle removal efficiency with lower possibilities of pattern damages.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.8
• /
• pp.828-832
• /
• 2015

This study is conducted for the evaluation of corrosion and lifetime prediction of fire extinguishing pipelines in residential buildings. The fire extinguishing pipeline is made of carbon steel. Twenty-four samples were selected among all the fire extinguishing pipelines in a building; the selection was based on specimenspositions, pipeline diameters, and pipeline thickness. Analysis was conducted by using the results of visual inspection, electrochemical potentiodynamic anodic polarization test, pitting depth measurements, and extreme value statistics with the Gumbel distribution. The maximum pitting depth and remaining life were statistically predicted using extreme value statistics. During visual inspection, pitting corrosion was observed in several samples. In addition, extreme value statistics demonstrated that there were several pipelines that were very sensitive to pitting corrosion. However, the pitting corrosion was not critical in all the pipelines; thus, it was necessary to change only those pipelines that were severely corroded.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.2
• /
• pp.132-139
• /
• 1993

TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

• Journal of Integrative Natural Science
• /
• v.6 no.2
• /
• pp.111-117
• /
• 2013

We propose a mean value function for software failures in NHPP software reliability model. And we deal with the maximum likelihood estimation and the least squares estimation in the proposed mean value function. The explicit mean value function solution for the proposed model is presented by MLE and LSE in two data sets. The values of SSE and MSE is presented in two data sets by MLE and LSE. We compare the predicted number of faults with the actual two data sets using the proposed mean value function.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.338-345
• /
• 2023

Nowadays, many companies are striving to turn customer value into business value. Customer Relationship Management is a management system that develops effective and efficient marketing strategies by classifying customers in detail based on their information, i.e. databases, and consists of various information technologies. To implement this management system, a customer integration database must be established, and customer characteristics (buying behavior, preferences, etc.) must be analyzed with the databases established and the behavior of each customer must be predicted. This study aims to systematically manage a large amount of customer data generated by companies that apply Customer Relationship Management, in order to develop data design and data governance strategies that should be considered to increase customer value and even company value. We mainly looked at the characteristics of customer relationship management and data governance, and then explored the link between the field of customer relationship management and data governance. In addition, we have developed a data strategy that companies need to perform data governance for customer relationship management.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8367-8370
• /
• 2014

The relationship between caveolin-1 (Cav-1) and clinicopathological characteristics of gastric cancer is controversial, although Cav-1 plays an important role in tumor metastasis. To evaluate the clinicopathological and prognostic value of expression in patients with gastric cancer, a meta-analysis was performed to investigate the impact on clinicopathological parameters and prognosis in gastric cancer cases. Studies assessing these parameters for Cav-1 in gastric cancer were identified up to June 2014. Finally, a total of six studies met the inclusion criteria. Our combined results showed that Cav-1 expression was significantly associated with the Lauren classification (pooled OR=0.603, 95% CI: 0.381-0.953, P=0.030). Furthermore, we found that Cav-1 expression predicted a better overall survival in gastric cancer patients (pooled OR=0.590, 95% CI: 0.360-0.970, P=0.038, fixed-effect). In conclusion, the overall data of the present meta analysis showed that Cav-1 expression was not correlated with clinicopathological features except for the Lauren classification. Simultaneously, Cav-1 overexpression predicted a better overall survival in gastric cancer. Cav-1 expression in tumors is a candidate positive prognostic biomarker for gastric cancer patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.375-383
• /
• 2008

This paper deals with reduction and analysis of cogging torque for permanent magnet synchronous generators with multi-pole rotor for wind power applications. Open-circuit field solutions are derived using a magnetic vector potential and a two-dimensional (2-d) polar coordinate systems. On the basis of derived open-circuit field solutions and 2-d permeance functions, we also derive open-circuit field solutions considering stator slotting effects. By using open-circuit field solutions considering stator slotting effects and energy variation methods, this paper analytically predicts the cogging torque considering skew effects. All analytical results are shown in good agreement with those obtained from finite element (FE) analyses. In order to reduce the cogging torque, by predicting the variation of the cogging torque according to pole arc/pitch ratio using analytical and FE methods, pole arc/pitch ratio which makes the cogging torque minimum are determined. However, we confirm that measured value for cogging torque of the PMG with determined pole arc/pitch ratio is twice higher than predicted value. Therefore, the reason for an error between measured and predicted cogging torque is discussed in terms of a shape of PMs and is proved experimentally.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.161-167
• /
• 2015

It is very difficult to predict time-series data. This is because data obtained from the signal having a non-linear characteristic has an uncertainty. In this paper, By differentiating time-series data is the average of the past data under the premise that change depending on what pattern, and find the soft look of time-series change pattern. This paper also apply the probability variables to generalize time-series data having a specific data according to the reflection ratio of the differentiation. The predicted value is estimated by removing cyclic movement and seasonal fluctuation, and reflect the trend by extracting the irregular fluctuation. Predicted value has demonstrated the superiority of the proposed algorithm and compared with the best results by a simple moving average and the moving average.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.85-92
• /
• 2006

A design program has been developed to predict film cooling performance of a liquid rocket engine. A thermal protecting effect of low mixture ratio gas layer has been analysed by CFD. A one-dimensional film cooling model based on the CFD results has been implemented to the previously developed design program of regenerative cooling. Satisfactory agreement has been achieved by comparing the predicted maximum heat flux at the throat of a subscale chamber and the average measured value, and the predicted nozzle average heat flux and the measured value for a full scale chamber with film cooling. It is ascertained that the film cooling is effective to reduce the throat heat flux in rocket engine chamber.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1192-1199
• /
• 1999

Two cultivars of subterranean clover (Trifolium subterraneum L.), "Dinninup" and "Seaton Park" were sown at Shenton Park Field Station, Western Australia, in May 1992 and 1993. The characteristics of Dinninup related to animal production were compared with Seaton Park under grazing conditions with herbage utilization efficiencies of 60% in 1992 and 65% in 1993. The results showed that Dinninup and Seaton Park had similar dry matter digestibility (77-78%) and dry matter production (1,290 kg/ha in 1992; 930 kg/ha in 1993) before flowering initiation even though Dinninup had more (p<0.05) branches, leaves and petioles per plant. After flowering, the herbage on offer of Dinninup was higher (p<0.05) and dry matter digestibility was lower (p<0.05) than that of Seaton Park while the sward structure was similar for both cultivars. The variation in nutritive value among plant parts increased with maturation. Leaf was more digestible than stem and petiole with a higher nitrogen content, and stem had the lowest dry matter digesitibility and nitrogen content in late of the season. Sheep did not show any preference for Seaton Park over Dinninup. The predicted bodyweight gain of sheep grazing pure Seaton Park and Dinninup swards using Grazfed software indicated that sheep grazing Dinninup were predicted to have a similar bodyweight gain in early growing stage and a significantly lower gain after flowering compared with those grazing Seaton Park.