Reduction and Analysis for Cogging Torque of Permanent Magnet Synchronous Generators with Multi-Pole Rotor for Wind Power Application

풍력발전용 영구자석 다극 동기발전기의 코깅토크의 해석 및 저감

  • Published : 2008.03.01

Abstract

This paper deals with reduction and analysis of cogging torque for permanent magnet synchronous generators with multi-pole rotor for wind power applications. Open-circuit field solutions are derived using a magnetic vector potential and a two-dimensional (2-d) polar coordinate systems. On the basis of derived open-circuit field solutions and 2-d permeance functions, we also derive open-circuit field solutions considering stator slotting effects. By using open-circuit field solutions considering stator slotting effects and energy variation methods, this paper analytically predicts the cogging torque considering skew effects. All analytical results are shown in good agreement with those obtained from finite element (FE) analyses. In order to reduce the cogging torque, by predicting the variation of the cogging torque according to pole arc/pitch ratio using analytical and FE methods, pole arc/pitch ratio which makes the cogging torque minimum are determined. However, we confirm that measured value for cogging torque of the PMG with determined pole arc/pitch ratio is twice higher than predicted value. Therefore, the reason for an error between measured and predicted cogging torque is discussed in terms of a shape of PMs and is proved experimentally.

Keywords

References

  1. Jianyi Chen, Chemmangot V. Nayar and Longya Xu, "Design and Finite-Element Analysis of an Outer-Rotor Permanent-Magnet Generator for Directly Coipled Wind Turbines," IEEE Trans. Magn., vol. 36, no. 5, pp. 3802-3809, Sept. 2000. https://doi.org/10.1109/20.908378
  2. L. Soderlund, J-T. Eriksson, J. Salonen and R. Perala, "A Permanent-Magnet Generator for Wind Power Applications," IEEE Trans. Magn., vol. 32, no. 4, pp. 2389-2392, July. 1996. https://doi.org/10.1109/20.511354
  3. E. Spooner and A. C. Williamson, "Direct coupled, permanent magnet generators for wind turbine applications," IEE Proc.-Electr. Power Appl., vol. 143, no. 1, pp.1-8, Jan. 1996. https://doi.org/10.1049/ip-epa:19960099
  4. W.wu, V.S. Ramsden, T. Crawford and G. Hill, " A Low-Speed, High-Torque, Direct Drive Permanent Magnet Generator for Wind Turbines", IEEE Industry Applications Conference, Vol.1, pp. 147-154, Oct. 2000.
  5. Z. Q. Zhu and D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors, PartI: Open-Circuit Field," IEEE Trans. Magn., vol. 29, no. 1, pp. 124-135, Jan. 1993. https://doi.org/10.1109/20.195557
  6. David L. Trumper, Won-jong Kim and Mark E. Williams, "Design and Analysis Framework for Linear Permanent-Magnet Machines," IEEE Transactions on Industry Applications, vol. 32, no. 2, pp.371-379, 1996. https://doi.org/10.1109/28.491486
  7. Keld F. Rasmussen, "Analytical Prediction of magnetic Field from Surface Mounted Permanent Magnet Motor," IEMDC'99, pp. 34-36, 1999.
  8. Jiabin Wang, Geraint W. Jewell and David Howe, "A General Framework for the Analysis and Design of Tubular Linear Permanent Magnet Machines," IEEE Trans. Magn., vol. 35, no. 3, pp. 1986-2000, May. 1999.
  9. Z. Q. Zhu, D. Howe, and C.C. Chan, "Improved Analytical Model for Predicting the Magnetic Field Distribution in Brushless Permanent Magnet Machines," IEEE Trans. Magn., vol. 38, no. 1, pp. 229-238, Jan. 2002. https://doi.org/10.1109/20.990112
  10. Z. Q. Zhu and D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors, PartIII: Effect of Stator Slotting," IEEE Trans. Magn., vol. 29, no. 1, pp. 143-151, Jan. 1993. https://doi.org/10.1109/20.195559
  11. Sang-Moon Hwang, Jae-Boo Eom, Geun-Bae Hwang, Weui-Bong Jeong and Yoong-Ho Jung, "Cogging Torque and Acoustic Noise Reduction in Permanent Magnet Motors by Teeth Pairing," IEEE Trans. Magn., vol. 36, no. 5, pp. 3144-3146, Sept. 2000. https://doi.org/10.1109/20.908714
  12. G. Barakat, T. El-meslouhi and B. Dakyo, "Analysis of the Cogging Torque Behavior of a Two-Phase Axial Flux Permanent Magnet Synchronous Machine," IEEE Trans. Magn., vol. 37, no. 4, pp. 2803-2805, July. 2001. https://doi.org/10.1109/20.951312
  13. C. Breton, J. Bartolome, J. A. Benito, Tassinaro, I. Flotats, C. W. Lu and B. J. Chalmers, "Influence of Machine Symmetry on Reduction of Cogging Torque in Permanent Magnet Brushless Motors," IEEE Trans. Magn., vol. 36, no. 5, pp. 3819-3823, Sept. 2000. https://doi.org/10.1109/20.908386
  14. Kwang-Heon Kim, Dong-Joon Sim and Jong-Soo Won, " Analysis of skew effects on cogging torque and BEMF for BLDCM", IEEE Industry Applications Conference, Vol.1, pp. 191-197, Oct. 1991.