• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.62-62
• /
• 2006

• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.143-149
• /
• 2007

The effect of precoating of silica with polyamine surfactants on the adsorption of five model compounds containing asphalt-like functionalities was studied. Hexadecyltrimethylammonium chloride (HDTMA) and 1-hexadecylamine were used for silica precoating. The model compounds representing five asphalt functionalities were benzoic acid, phenol, benzylbenzoate, benzophenone, and quinoline. All the adsorption isotherms conformed well to the Langmuir adsorption model. All the model compounds showed decreased adsorption with the HDTMA precoating. However, two acidic compounds, benzoic acid and phenol, showed enhanced adsorption on the silica precoated with 1-hexadecylamine. In aqueous solutions, the adsorption of the acidic compounds were in the following order: silica precoated with 1-hexadecylamine > silica precoated with HDTMA > uncoated silica.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.78-78
• /
• 2006

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.79-84
• /
• 1998

The process of double coating consists of bottom coating using relatively coaser pigments to improve characteristics of base paper and top coating using finer pigments to cover unevenness of the bottom coating and to give various function of the coated paper. The structure of precoating is influenced not only by its components, but also characteristics of base paper, Moreover pore size and its size distribution of precoating are expected to influence the top coating properties, but this is not well understood. Coating and printing operations involve the application of pigmented fluid on top of a porous substrate. The porosity of the substrate has been shown to influence the properties of the coating, but a good understanding of the mechanisms is lacking in the literature. The role of pore size and void volume on top coating structure is unclear.

• 한국초전도학회:학술대회논문집
• /
• v.15
• /
• pp.58-58
• /
• 2005

• Journal of Surface Science and Engineering
• /
• v.39 no.2
• /
• pp.57-63
• /
• 2006

In this study, In-base solder was applied to the interface between $Bi_2Sr_2Ca_1Cu_2O_x(Bi_{2212})$ superconductor and Cu-Ni shunt metal at the temperature lower than $150^{\circ}C$. Most of the cases, $Bi_{2212}$ superconductor was precoated with Ag by electroplating in order to improve the contact properties of the solder layer. When the superconductor was directly soldered on to the superconductor, the solder was easily separated without external force. The shear strength of the contact between superconductor and shunt metal increased from 69.2 kgf to 74.4 kgf and 80.1 kgf, as the current density of the Ag electroplating was changed from 63 mA to 96 mA and 126 mA, respectively. The contact strength also increased to 49.9 kgf and 69.2 kgf when thickness of the electroplated Ag layer increased to $5{\mu}m$ and $10{\mu}m$, reapectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.124-131
• /
• 2006

It is well known that smoother surface in substrate for coating or converting can obtain better results. Generally paper substrate is taking machine calendar process in papermaking system to give more uniformity and to get better coating runnability. This paper was prepared to find better idea for obtaining smoother surface after precalendering precoated paper as a substrate of double coating system. It was shown precalendering had effect on roughness improvement for precoating layer but was difficult to say it was effected to supercalendering results for double coating. The porosity and ink evaluation with precalendered double coated paper is needed to identify more essential clue for precalendering effect.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.326-326
• /
• 2012

현재 자동차 강판 시장은 이산화탄소 저감과 승객의 안전확보를 위하여 고장력강을 요구하고 있는 추세이며, 강도와 성형성을 동시에 확보하기 위하여 DP, TRIP강과 같은 변태강화형 강판을 선호한다. 그러나 강판의 상분율을 제어하기 위해서는 Si, Mn등과 같은 합금원소를 필요로 하게 되며 강판의 생산공정 중 이들 합금원소는 강판의 표면에 산화물로 농화되어 아연도금 특성을 크게 저하시키는 결과를 초래한다. 따라서 본 연구에서는 냉연 아연도금강판의 생산 공정을 모사하고 이들의 산화물 구조를 분석하여 도금특성에 어떠한 영향을 미치는지 고찰하고 Ni-precoating 공정을 이용하여 강판의 도금성 개선의 가능성을 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.449-470
• /
• 2018

A review of research trends on wood surface protection for exterior use obtained the following conclusions: It has been reported that inorganic compounds such as chrome and copper used as wood preservatives can protect wood from weathering. It has been shown that precoating with hydrophobic substances such as wax and oil, UV absorbers, and HALS (Hindered Amine Light Stabilizers) enhances weathering resistance on the surface of ACQ-treated wood. Opaque coatings of paint/stains and semitransparent stains on the surface of preservative treated wood can increase the synergistic effects on prevention of weathering deterioration. Also the need for repainting periodically for the protection of the preservative treated wood surface has also been suggested. ZnO or $TiO_2$ of fine particles, metal ions such as Co, Cr, Fe, Mn, Ni and Ti, and UV absorbers such as tris-resorcinol triazine derivatives, triazine and benzotriazole were introduced as additives for preventing UV in the transparent coating on wood. Several reports showed that chemical modification such as methylation, acetylation, or alkylations have made some increases the effects of preventing weathering with the increasing weight gain of chemical formulas. In heat-treated wood, there were various contradictory reports on the resistance of weathering, and there were some other reports emphasizing the necessity of painting with UV resistance, which leads to the necessity of more advanced studies.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.569-574
• /
• 2001

The crystal structure, surface morphology and preferred orientation of the copper electrodeposit were investigated by the using sulfate bath with $SiO_2$suspensions and the cathode substrate Au sputtered. As by the addition of colloidal silica in copper electrolytic bath and Au pre-coating on substrate, the crystal particles of deposits was fined-down, made uniform and the account of particles were increased. Hardness of copper electrodeposits with colloidal silica increased about 15% in comparison with that of pure copper deposit film and (111), (200) and (311) plane of X-ray diffraction patterns were almost swept away, so preferred orientation of the copper deposits changed from (111) to (110) plane by codeposit $SiO_2$ and precoating the substrate.