• 대기
• /
• 제22권3호
• /
• pp.287-298
• /
• 2012

The predictability of heavy precipitation over the Korean Peninsula is studied using THORPEX Interactive Grand Global Ensemble (TIGGE) data. The performance of the six ensemble models is compared through the inconsistency (or jumpiness) and Root Mean Square Error (RMSE) for MSLP, T850 and H500. Grand Ensemble (GE) of the three best ensemble models (ECMWF, UKMO and CMA) with equal weight and without bias correction is consisted. The jumpiness calculated in this study indicates that the GE is more consistent than each single ensemble model. Brier Score (BS) of precipitation also shows that the GE outperforms. The GE is used for a case study of a heavy rainfall event in Korean Peninsula on 9 July 2009. The probability forecast of precipitation using 90 members of the GE and the percentage of 90 members exceeding 90 percentile in climatological Probability Density Function (PDF) of observed precipitation are calculated. As the GE is excellent in possibility of potential detection of heavy rainfall, GE is more skillful than the single ensemble model and can lead to a heavy rainfall warning in medium-range. If the performance of each single ensemble model is also improved, GE can provide better performance.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.280-284
• /
• 2012

In this study, we prepared a sample of AISI 409L weld metals using automotive exhaust manifolds and evaluated their corrosion properties by conducting an anodic polarization test after 10 minute of heat treatment at $900^{\circ}C$. The specimens of AISI 409L transformed fully ferrite. Weld metal was refined more than base metal. Specimen of heat treatment at $900^{\circ}C$ and as weld specimen was formed precipitation. However heat treatment specimen was bulkly formed and coarser than the as weld specimen. The strength measured by 10 Hv highly at heat treatment specimens in comparison with as weld. The increase in strength is attributed to the precipitation of Ti. The result of heat treatment suggest that there was a decrease of current density and high corrosion potential. Following heat treatment process produced Ti precipitation and for this reason, it can restrain Cr-carbide so that steel will have more corrosion resistance.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.174-174
• /
• 2023

The impact of global warming on the south Asian summer monsoon is of critical importance for the large population of this region. This study aims to investigate the future changes of the precipitation extremes during pre-monsoon and monsoon, across this region in a more organized regional structure. The study area is divided into six major divisions based on the Köppen-Geiger's climate structure and 10 sub-divisions considering the geographical locations. The future changes of extreme precipitation indices are analyzed for each zone separately using five indices from ETCCDI (Expert Team on Climate Change Detection and Indices); R10mm, Rx1day, Rx5day, R95pTOT and PRCPTOT. 10 global climate model (GCM) outputs from the latest CMIP6 under four combinations of SSP-RCP scenarios (SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) are used. The GCMs are bias corrected using nonparametric quantile transformation based on the smoothing spline method. The future period is divided into near future (2031-2065) and far future (2066-2100) and then the changes are compared based on the historical period (1980-2014). The analysis is carried out separately for pre-monsoon (March, April, May) and monsoon (June, July, August, September). The methodology used to compare the changes is probability distribution functions (PDF). Kernel density estimation is used to plot the PDFs. For this study we did not use a multi-model ensemble output and the changes in each extreme precipitation index are analyzed GCM wise. From the results it can be observed that the performance of the GCMs vary depending on the sub-zone as well as on the precipitation index. Final conclusions are made by removing the poor performing GCMs and by analyzing the overall changes in the PDFs of the remaining GCMs.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.67-71
• /
• 2015

Pulse electroplating was studied to form nanocrystal structure effectively by changing plating current density and duty cycle. When both of plating current density and duty cycle were decreased from $100mA/cm^2$ and 70% to $50mA/cm^2$ and 30%, the P content in the Ni matrix was increased almost up to the composition of $Ni_3P$ compound and the grain growth after annealing was retarded as well. The as-plated hardness values ranging from 660 to 753 HV are mainly based on the formation of nanocrystal structure. On the other hand, the post-anneal hardness values ranging from 898 to 1045 HV, which are comparable to the hardness of hard Cr, are coming from how competition worked between the precipitation of $Ni_3P$ and the grain coarsening. According to the ANOVA and regression analysis, the plating current density showed more strong effect on nanocrystal size and film hardness than the duty cycle.

• 대한화학회지
• /
• 제14권1호
• /
• pp.5-12
• /
• 1970

River water and industrial waste water in Seoul were studied by means of chemical oxygen demand(COD) as an indicator for water pollution, from August 1967 to July 1968. Rivers flowing through residential and industrial areas are badly contaminated and COD of water in Han River increases as it progresses to downstream. Seasonal variation of COD showed that higher value of COD was observed in spring and lower in autumn. It is clear that the seasonal variation of COD is influenced by the precipitation. Close relationship was found between COD and population density. The lowest COD curve obtained by plotting COD values against population density and show that the curve slopes upward. The discontinuation of the curve was shown at the population density of 14,000/km$^2$; an increase in COD was acute over the population density of 14,000/km$^2$.

• 대한토목학회논문집
• /
• 제31권2B호
• /
• pp.87-98
• /
• 2011

최근 지구온난화에 따른 기후변화로 홍수와 가뭄 같은 수문학적 재해가 과거에 비해 발생빈도와 크기가 변하고 있는 추세이다. 특히 가뭄은 긴 지속기간에 걸쳐 피해를 유발하므로 다른 수문학적 재해에 비해 보다 심각한 결과를 초래한다. 하지만 역설적으로 가뭄은 홍수와 달리 장기간에 거쳐 발생하므로 중요성과 심각성을 인식하기 어렵다. 따라서 가뭄의 발생에 대해 분석하고 그에 대한 대책을 마련하기 위해 여러 가지 가뭄의 종류 중 강수량과 가장 밀접한 관련이 있는 기상학적 가뭄에 대해 분석을 실시했다. 기상청에서 관측한 강수 및 온도자료를 이용하여 기상학적 가뭄지수인 팔머가뭄심도지수(Palmer Drought Severity Index), 표준강수지수(Standard Precipitation Index), EDI(Effective Drought Index)를 산정하였다. 그리고 산정된 가뭄지수를 비교분석하여, 실제 과거가뭄사상에 잘 부합되며, 일별로 지수 산정이 가능한 장점이 있는 EDI를 이용해 가뭄빈도해석을 실시하였다. 분석방법으로는 경계핵밀도함수를 이용해 EDI의 빈도해석을 실시하였다. 분석 결과, 대부분의 지점에서 봄철의 가뭄재현기간이 10년에서 20년 빈도 사이의 값을 나타내 다른 계절보다 봄에 가뭄이 잦음을 확인할 수 있었다. 또 영남지방과 남해안 일대의 재현기간이 상대적으로 더 짧게 나타나 지역적으로도 가뭄의 심도와 재현기간에 차이가 있음이 확인되었다.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.364-372
• /
• 1988

The mechanical properties and microstructure of ceramics of the system Al2O3-ZrO2-Y2O3 sintered at 1$650^{\circ}C$ for 2h after powder preparation by the precipitation method from Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O were investigated. The Al2O3-ZrO2-Y2O3 ceramics sintered at 1$650^{\circ}C$ for 2h after mixing alpha-Al2O3 and ZrO2-Y2O3 powders, both were separately precipitated and calcined, were found to have the relative density higher than 97.5% so that the strengthening and toughening mechanisms could be explained mainly as the stress-induced phase transformation. On the other hand, the sintered bodies prepared by co-precipitating the three starting materials were measured to have the relative density lower than 85% so that the degradation of strength were observed above 15 vol% ZrO2 contents due to the high porosity by which the effect of stress-induced phase transformation was assumed to be depressed.

• 한국습지학회지
• /
• 제12권3호
• /
• pp.57-65
• /
• 2010

본 연구는 저수지의 퇴적작용을 이해하는데 필요한, 저수지퇴적토 코어의 물리적 특성 변화에 대한 기초자료를 제공하기 위하여 수행되었다. 준설작업이 시행된 적이 없는 세 곳의 저수지에서 채취한 퇴적토 코어에 대하여 깊이에 따른 가비중, 유기물량, 평균입자크기, 모래의 비율 변화를 연중 일강수량 50mm이상일 때의 강수량을 합산한 연강수량(AP50) 변화 자료와 비교, 분석하였다. 저수지의 퇴적토 코어는 무기질 토양으로서 유기물은 육상식물의 잔재물로부터 기원하였으며, 유기물 함량이 10% 이하인 미사질양토 퇴적토에서 유기물 함량의 변화는 저수지로 유입되는 토양입자크기의 변화와 관계가 있었다. 퇴적토 코어의 입자크기 및 모래 비율의 급격한 변동은 강수량의 증감과 관계가 있었으며, 저수지의 수위 변화와 유속이 저수지의 퇴적토 형성에 영향을 미칠 수도 있다. AP50의 연간 변동 자료를 기초로 추정하였을 때, 10년 이내의 짧은 기간 동안 약 30cm 이상의 퇴적토가 쌓일 수 있는 것으로 나타났다. 저수지에서 짧은 시간 동안 쌓여서 형성된 퇴적토에도 유역에서 발생한 인위적 또는 자연적 사건들이 퇴적토의 물리적 특성들에 반영될 수 있음이 확인되었다.

• 한국대기환경학회지
• /
• 제29권3호
• /
• pp.297-306
• /
• 2013

This study used long-term air and weather data from 2000 to 2009 as raw data sets to develop regression models in order to estimate precipitation scavenging contributions of ambient $PM_{10}$ and $NO_2$ in Korea. The data were initially analyzed to calculate scavenging ratio (SR), defined as the removal efficiency for $PM_{10}$ and $NO_2$ by actual precipitation. Next, the effective scavenging contributions (ESC) with considering precipitation probability density were calculated for each sector of precipitation range. Finally, the empirical regression equations for the two air pollutants were separately developed, and then the equations were applied to test the model validity with the raw data sets of 2010 and 2011, which were not involved in the modeling process. The results showed that the predicted $PM_{10}$ ESC by the model was 23.8% and the observed $PM_{10}$ ESCs were 23.6% in 2010 and 24.0% in 2011, respectively. As for $NO_2$, the predicted ESC by the model was 16.3% and the observed ESCs were 16.4% in 2010 and 16.6% in 2011, respectively. Thus the developed regression models fitted quite well the actual scavenging contribution for both ambient $PM_{10}$ and $NO_2$. The models can then be used as a good tool to quantitatively apportion the natural and anthropogenic sink contribution in Korea. However, to apply the models for far future, the precipitation probability density function (PPDF) as a weather variable in the model equations must be renewed periodically to increase prediction accuracy and reliability. Further, in order to apply the models in a specific local area, it is recommended that the long-term oriented local PPDF should be inserted in the models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1678-1683
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Although DBD high electron density and energy, its potential use as nano and sub-micron sized particle charging are not well known. Aim of this work is to determine design and operating parameters of a two-stage ESP with DBD. DBD and ESP are used as particle charger and precipitator, respectively. We measured particle precipitation efficiency of two-stage ESP and estimated ozone decomposition of both pelletized $MnO_2$ catalyst and pelletized activated carbon. To examine the particle precipitation efficiency, nano and sub-micron sized particles were generated by a tube furnace and an atomizer. AC voltage of $7{\sim}10$ kV(rms) and 60 Hz is used as DBD plasma source. DC -8 kV is applied to the ESP for particle precipitation. The overall particle collection efficiency for the two-stage ESP with DBD is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized $MnO_2$ catalyst or pelletized activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.