• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.1
• /
• pp.43-47
• /
• 2003

Anterior set back segmental surgery has been used for shortening the period of orthodontic treatment in case of bimaxillary or maxillary protrusion. In most cases, it requires pre-operative orthodontic treatment. Through properly performed leveling and tooth aligning, the operative porcedure can be easier and post-operative occlusal stability can be increased. But it takes time for orthodontic treatment. Recently, we have been using anterior segmental surgery before orthodontic treatment and have reliable results from that. Therefore, we have to consider arch shape, curve of Spee, tooth selection to be extracted for obtaining of post-operative occlusal stability without pre-operative orthodontic treatment.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.2033-2037
• /
• 2005

In vitro selection was used to isolate $Mg^{2+}$-dependent self-cleaving ribozymes with cis-cleavage activity from a pre-tRNA library having 40-mer random sequences attached to 5'-end of E. coli $tRNA^{Phe}$. After 8 rounds of SELEX (Systematic Evolution of Ligands by Exponential Enrichment), RNA molecules which can self-cleave at the high concentration of $Mg^{2+}$ were isolated. The selected ribozymes can carry out the self-cleavage reaction in the presence of 100 mM $Mg^{2+}$ but not in 10 mM $Mg^{2+}$. The cleavage sites of the ribozymes are located at +3 and +4 of $tRNA^{Phe}$, compared with +1 position of 5'-end cleavage site of pre-tRNA by RNase P. New RNA constructs deprived of its D stem-loop, anticodon stem-loop, variable loop and T stem-loop, respectively showed the cleavage specificity identical to a ribozyme having the intact tRNA structure. Also, the new ribozyme fused with both a ribozyme and $tRNA^{Leu}$ showed the cleavage activities at the various sites within its sequences, different from two sites of position +3 and +4 observed in the ribozyme with $tRNA^{Phe}$. Our results suggest that the selected ribozyme is not structural-specific for tRNA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.244-252
• /
• 1999

Intensive selection for muscle development and against fat deposition in pigs during the last 50 years has contributed to the increased incidence of porcine stress syndrome (PSS) and pale soft exudative pork (PSE). Genetics, nutrition and management, preslaughter animal handling, stunning, dehairing and carcass chilling influence the incidence and magnitude of the PSE condition. The normal incidence of PSE has been reported to range from 10 to 30%, but in some isolated instances is up to 60%. The elimination of halothane-positive pigs in breeding programs has reduced PSS and PSE. Further improvements in meat quality by terminal sire evaluation and selection can be achieved within halothane-negative populations because around 20% of the variation in meat color and water binding capacity seems to be genetically related. Pre-slaughter handling on the farm, during transit to the packing plant and at the packing plant can greatly influence the meat quality, contributing 10 to 25% of the variation. An effective stunning method, skinning instead of scalding/dehairing and rapid post-slaughter chilling further reduce the incidence of PSE pork. In addition to proper care and handling a carcass-merit based marketing system, that reflected the value differential between desirable and undesirable meat quality in the pricing system for pigs, would provide a great incentive to change pork production systems in order to improve meat quality, thus improving the image and usefulness of pork as food.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.27-30
• /
• 2003

The introduction of reseller In Australian Fixed Telecommunication Market resulted in the reduction of Telstra's local call market share by 13 percent and average fall rate was reduced. Thus, Telstra increased basic rate at 14.5 percent to compensate loss revenue in the local call market. With the deployment of carrier pre-selection of long distance and international calls, it reduced long distance rate at 23.5 percent and international tall rate at 53 percent, and increased the Churn rate. Therefore, the deployment of service-based competition brought efficient results for long distance and international call market. However, LM market created 13.4 percent reduction in call rates, complications in charge system, technical barriers and the preference of one-bill by customers.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.13-21
• /
• 2014

The object of this research is to perform the basic research for the development of selectively permeable membrane fabrics which is suitable for korean military in sense of embattlement. As a key factor of selectively permeable membrane fabrics which is suitable for korean military, this study selected the best PVA thickness and membrane selection for DMMP protection, pre-treatment method for conformational stability of face fabric and water/oil repellent process condition. Especially as the PVA coating thickness of the fabrics increase, peneration of DMMP decrease including water vapor permeation is lower. This study shows how physical features and permeability of chemical agents can be influenced by pre-treatment methods, the selection of selectively permeable membrane, the thickness of PVA etc. Results showed that outer shell / PVA / e-PTFE materials possessed performance with superior water vapor permeation (Over $3,000g/m^2/day$) and protective capability against DMMP vapor ($0.6{\mu}g/cm^2{\cdot}16hr$).

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.240-243
• /
• 2022

Tracking the location of program defects is an essential task for software maintenance and repair. When a bug report is submitted, bug localization is a costly task because of the developer's manual effort. Many researchers have tried to automate the task, but according to the reported results, the performance is still insufficient in practice. Therefore, in this study, we analyzed a large amount of bug report data and the latest research and found that the existing studies used only one preprocessing without considering the characteristics of the bug report. In this paper, to solve the problems mentioned earlier, we propose a pre/post-processing operator selection approach for bug localization.

• Human Ecology Research
• /
• v.60 no.4
• /
• pp.565-576
• /
• 2022

The purpose of this study is to identify the effect of Home Economics Instruction applying Flipped and Problem-Based Learning (FPBL) on Korean middle-school students' metacognition skill. The study uses a pre-post design test of the same group. There were 151 participants (77 male and 74 female) who were middle-school students in the third grade. Two hours of classes on 'Food Selection and Storage' were given per week for three weeks - a total of six hours. Analysis using the t-test revealed a statistically significant difference between the pre-test and the post-test, supporting the conclusion that participating in the class improved the metacognition, food selection, and storage behavior scores of the middle-school students. All area scores and overall averages of metacognitive sub-elements such as planning, monitoring, regulation, and evaluation also improved after taking FPBL classes. From the results of this study, Home Economics Instruction applying FPBL is an effective teaching method for improving middle-school students' metacognition.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.27-32
• /
• 2013

Natural gas liquefaction process which is operated under cryogenic condition spends large amount of energy. Most of energy in the natural gas liquefaction process is consumed by compressors. Therefore, minimizing energy consumption of compressors is an important issue in process design and operation. Among various natural gas liquefaction processes, propane pre-cooled mixed refrigerant (C3MR) process consists of mixed refrigerant system and pure refrigerant system. In this study, to find the optimal design of pure refrigerant system, pure refrigerant cycle is simulated on different number of pressure levels and the necessary energy of each design is compared. After that, the driver selection model is applied to analyse each processes, which has different number of equipments, in terms of cost. As the result, the design using many equipments spends lower energy. Using this result, this study suggests standard of process design selection by the cost term.

• Journal of Environmental Science International
• /
• v.22 no.4
• /
• pp.453-461
• /
• 2013

This study, changes in raw water quality is to indicate on the efficiency of ozone treatment of each pollutant as compared to derive the appropriate operating measures. The appropriate selection for injection rate of pre-ozone and did not inject pre-ozone assess changes in the water. When good water quality, you not injected of pre-ozone to evaluate the economic efficiency of electricity and put the most cost-effective ozone concentration were evaluated. Evaluation remove organic matter and chlorophyll-a concentration level in experiments with each factor of the water DOC> 2.5 mg/L, THMFP> 70 ${\mu}g/L$, Chl-a> 30 $mg/m^3$or less constant process, if you do not need to put pre-ozone showed little impact. It also does not put you in pre-ozone appropriate produce enough power rate savings was calculated as approximately 90 million won. Ability to remove organic materials and the ability to produce disinfection byproducts, and cost-effective decisions by considering the concentration of injection if pre-ozone 1 mg/L was investigated by the appropriate concentration of ozone injection.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.20-25
• /
• 2000

This paper proposes the method of surface classification and threshold value selection for surface classification of the three-dimensional object recognition. The processings of three-dimensional image processing system consist of three steps, i.e, acquisition of range data, feature extraction and matching process. This paper proposes the method of shape feature extraction from the acquired rage data in the entire three-dimensional image processing system. In order to achieve these goals, firstly, this article proposes the surface classification method by using the distribution characteristics of sign value from range values. Also pre-existing method which uses the K-curvature and K-curvature has limitation in the practical threshold value selection. To overcome this, this article proposes the selection of threshold value for surface classification. Finally, the effectiveness of this article is demonstrated by the several experiments.