• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.101-105
• /
• 2003

본 논문은 고리 1호기 원자력발전소를 기준발전소로 하여 개발된 PRE-MARK 소개 및 PRE-MARK을 기반으로 개발된 노심모델의 결과를 제시하고자 하는 것을 주된 목적으로 하고 있다. 노심 모델개발에는 REMARK 모델 프로그램을 기반으로 개발된 PRE-MARK를 이용하였으며, PRE-MARK의 주요 특징으로는 노심모델 입력자료를 노심설계코드 및 Lattice 코드로부터 자동으로 생성하며여 GUI 기반으로 변경된 REMARK으로 입력하여 노심모델을 구동함과 동시에 실시간으로 중요 변수의 현재 값들을 그래프로 도시해줌으로 조율 (Tuning) 상수를 용이하게 결정할 수 있도록 하는 것이다. 또한 BOL 및 EOL에서 HFP 평형 Xenon조건에서의 제어봉 위치에 따른 제어봉가(Rod worth)를 고리 1호기 20주기 NDR (Nuclear Design Report)과 비교하고, 원자로정지 이후 BOL, MOL 및 EOL에서의 시간에 따른 Xenon의 반응도 영향을 비교함으로 개발된 모델의 건전성을 입증하였다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.78-83
• /
• 2000

본 논문은 영광 1호기 원자력발전소를 기준발전소로 하여 개발된 PRE-MARK 소개 및 PRE-MARK을 기반으로 개발된 노심모델의 결과를 제시하고자 하는 것을 주된 목적으로 하고 있다. 노심 모델개발에는 REMARK 모델 프로그램을 기반으로 개발된 PRE-MARK를 이용하였으며, PRE-MARK의 주요 특징으로는 노심모델 입력자료를 노심설계코드 및 Lattice코드로부터 자동으로 생성하며 GUI 기반으로 변경된 REMARK으로 입력하여 노심모델을 구동함과 동시에 실시간으로 중요 변수의 현재 값들을 그래프로 도시해줌으로 조율 (Tuning) 상수를 용이하게 결정할 수 있도록 하는 것이다 또한 BOL 및 EOL에서 HFP 평형 Xenon 조건에서의 제어봉 위치에 따른 제어봉가(Rod worth)를 영광 1호기 12주기 NDR(Nuclear Design Report)과 비교하고, 원자로정지 이후 BOL, MOL 및 EOL에서의 시간에 따른 Xenon의 반응도 영향을 비교함으로 개발된 모델의 건전성을 입증하였다.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.689-698
• /
• 2012

This paper investigates the effects of applying different input current waveshapes on the performance of a continuous-conduction-mode (CCM) power-factor-correction (PFC) boost pre-regulator. It is found that the output voltage ripple of the pre-regulator can be reduced if the input current is modified to include controlled amount of higher order harmonics. This finding allows us to balance the performance of output regulation and the harmonic current emission when coming to the design of the pre-regulator. An experimental PFC boost pre-regulator prototype is constructed to verify the analysis and show the benefit of the pre-regulator operating with input current containing higher order harmonics.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.47-51
• /
• 2022

The purpose of this study is to investigate the views on utilizing ICT material, especially the reasons for ICT material choice. Numerous recent studies have demonstrated increased use of electronic devices including smartphones in educational settings. But the reasons for using it as a learning tool have not been relatively researched from the point of view of pre-service teachers. Therefore, this study analyzed the pre-service teachers' thinking about utilizing ICT material and their learning experience. In that regard, data was collected in various ways such as surveys, interviews, and brief writings of participants. According to the study result, pre-service teachers were motivated in utilizing ICT material rather than text material. That is the reason why, as adult learners, especially pre-service teachers could be more motivated in self-directed learning environments. This study will be useful in considering ideas for the instructional design of pre-service teachers.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.27-35
• /
• 2005

In this study, a performance analysis code was developed for the off-design performance analysis of air turbo ramjet(ATR) engine, and the analyses were performed for the pre-designed ATR engine at several operating points in the envelope. Variable intake and thrust nozzle were assumed to cover the wide envelope. Mathematical models for each components were developed to calculate their off-design performance. Simple design formulas were introduced for some components to explore the performance variation versus the design parameters. As a result, the pre-defined engine couldn't cover the entire mission profile. And it was also found that the effect of the pre-cooler was not very great, especially in the region of low Mach number.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.33-42
• /
• 2005

The bearing methods using pile of steel itself or reinforced concrete has been applying which in excavated depth was not deep. Also, the retaining wall as resisting structure to lateral force has taken weakness that the cure periods of concreted is long. Recently, with the material cost of steel, the application of cement is more increasing trend. In this study, the design methods of earth retaining and retention wall within the pre-casted concrete pile, PHC(Pretentioned spun High strength Concrete piles), was proposed which in the ground condition of excavated depth was not deep. The typical ground conditions, cohesive and non-cohesive soil, was considered as follows; soil strength as internal friction angle and UU(Undrained Unconsolidation triaxial test) strength, soil reaction and stabilization of structures. The application of design methods could be confirmed through the comparing and analyzing between measured data and utility software for the design.

• Communications of Mathematical Education
• /
• v.29 no.2
• /
• pp.197-214
• /
• 2015

This study is to design Flipped Learning classrooms of learner-centered education on the pre-service math teachers education. The study aims to explore the feasibility of teaching and learning method. To achieve the objectives of the study was to explore the teaching and learning model. Flipped learing classroom design includes a main step of a typical process of teaching system. And we designed the model based on the ADDIE Model. This model contains the design steps and the Flipped learning component of the teaching and learning design model. Designed classroom presented in three steps that are before classroom, during classroom and after classroom.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.1-9
• /
• 2004

The performance analysis code has been developed for vertical take-off and landing(VTOL) UAV which can be utilized as a trade analysis tool in the pre-conceptual design phase. The UAV requires VTOL capability and high speed cruise performance. The main logic of this performance analysis code is to estimate performance parameters of each mission segment by mission fuel weight iteration. The reliability of this performance analysis code is discussed by comparing the data of existing dual flight mode VTOL UAVs such as Boeing CRW and Bell Tilt Rotor.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.121-131
• /
• 2022

We look at the initial stage of Meta (previous Facebook)'s new metaverse platform and investigate its platform design in pre-launch and ignition life stage. From the Rocket Model (RM)'s theoretical logic, the results reveal that Meta firstly focuses on investing in key content developers by acquiring virtual reality (VR), video, music content firms and offering production support platform of the augmented reality (AR) content, 'Spark AR' last three years (2019~2021) for attracting high-potential developers and users. In terms of three matching criteria, Meta develops an Artificial Intelligence (AI) powered translation software, partners with Microsoft (MS) for cloud computing and AI, and develops an AI platform for realistic avatar, MyoSuite. In 'connect' function, Meta curates the game concept submitted by game developers, welcomes other game and SNS based metaverse apps, and expands Horizon Worlds (HW) on VR devices to PCs and mobile devices. In 'transact' function, Meta offers 'HW Creator Funding' program for metaverse, launches the first commercialized Meta Avatar Store on Meta's conventional SNS and Messaging apps by inviting all fashion creators to design and sell clothing in this store. Mata also launches an initial test of non-fungible token (NFT) display on Instagram and expands it to Facebook in the US. Lastly, regarding optimization, especially in the face of recent data privacy issues that have adversely affected corporate key performance indicators (KPIs), Meta assures not to collect any new data and to make its privacy policy easier to understand and update its terms of service more user friendly.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.613-618
• /
• 1993

This paper presents the aircraft autopilot system with a pre-designed gain schedule. It is mainly consisted of the parameter estimation end the autopilot system design. For off-line parameter estimation, leastsquare methods are investigated. The design of a controller is done in frequenced domain using classical control method and it is designed to satisfy the predetermined requirement such as time constant and transient response. Finally, it is compared with a optimal regulator.