• 제목/요약/키워드: Pre Inspection

검색결과 300건 처리시간 0.025초

강 트러스교 확장공사시 시공중 계측 (Construction Monitoring for Steel Truss Bridge Widening Works)

  • 이창수;장정환;이장석;김남홍
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제9권2호
    • /
    • pp.103-112
    • /
    • 2005
  • 본 연구에서는 과거 붕괴사고로 인해 큰 사회적 이슈가 되었고 현재 확장공사가 진행 중인 성수대교를 대상 구조물로 하여 시공중 계측을 통한 각 시공단계별 안정성을 확인하였다. 그 결과, 앵커리지 트러스와 서스펜디드 트러스 가설단계별로 측정된 계측값은 구조해석값의 60~110%이고, 선하중 재하에 의해 부재에 발생하는 응력이 해석값과 유사하게 나타났으므로 각각의 부재는 충분한 강성을 가지고 있고 시공 상태도 양호한 것으로 판단되었다. 기존부와 확장부 간의 일체화 여부를 파악하기 위하여 실시한 진동변위 측정 결과, 기존부와 확장부는 횡방향 부재 및 스웨이 브레이싱의 볼트체결로 인해 일체화 된 것으로 확인되었다.

원자력발전소 PSI/ISI 데이더 관리를 위한 지능형 데이더베이스 프로그램 개발 (제 2보) (Development of Intelligent Database Program for PSI/ISI Data Management of Nuclear Power Plant (Part II))

  • 박은수;박익근;엄병국;이종포;한치현
    • 비파괴검사학회지
    • /
    • 제20권3호
    • /
    • pp.200-205
    • /
    • 2000
  • 제 1보에서 Windows 환경 하에서 PSI/ISI 데이터의 효율적 관리 및 다원적평가와 분석이 가능한 고리 원전 PSI/ISI 데이터베이스 구축과 프로그램 개발(IDPIN)에 대해 소개하였다. 제 2보에서는 월성 원자력발전소 PSI/ISI 자료 관리를 위한 지능형 데이터베이스 프로그램(WS-IDPIN)을 개발하였다. 이 프로그램에는 월성 원전 PSI/ISI 관련 자료 분석 기능, PSI/ISI UT 검사 보고서 양식의 표준화와 전산 시스템화, PSI/ISI 비파괴검사 결과의 통계적 신뢰도 평가 프로그램(depth and length sizing performance 등) 등을 개발하여 원전 PSI/ISI 데이터 관리 전문가시스템(expert system)화에 한 단계 접근하였다.

  • PDF

국방 분야 자동화시험장비 유효성 확인 방안에 관한 연구 (A Study on Automatic Test Equipment Validation in the Realm of Defense)

  • 박세진
    • 한국산학기술학회논문지
    • /
    • 제21권9호
    • /
    • pp.144-150
    • /
    • 2020
  • 본 논문에서는 국외에서 정의하는 자동화시험시스템과 자동화시험장비(ATE)의 비교를 통해 국내 ATE 재정립을 비롯해 국내 유도무기 분야의 ATE 현황을 살펴보면서 국방 분야 ATE의 유효성 확인 방안을 모색해 보았다. 국내 무기체계 개발단계 ATE 장비 유효성 확인 방안 모색을 위한 활동으로 국내 유도무기 분야의 ATE 장비 현황을 분석하고 ATE 유효성 확인 방안을 살펴보았다. 신규 제작되는 ATE에 대해 반복성, 재현성 확인 방안 및 현재 사용되는 ATE의 유효성 확인을 위하여 특정 유도제어부 영상성능에 대해 오류 주입시험을 수행해 보았다. 개발단계부터 유효성 확인을 위한 방안으로 ATE의 설계 및 구현시 사전점검단계 기능을 요구사항으로 반영되야 할 필요성을 논하였으며, 국내 ATE 개발 시 표준화된 국제표준시험시스템 테스트 스크립트 언어를 활용하여 효율적인 유효성 확인과 SW 신뢰성 확보 가능성을 검토해 보았다. 이를 통하면 장기적으로 주장비와 시험장비 간 상호 연동성을 확보할 수 있으며 시험자는 표준화된 시험방식을 지원하는 시험시스템 플랫폼을 확보할 수 있어 무기체계별 특정 ATE 유효성 확인에 효과적일 것으로 판단된다.

그리드형 보강재와 분산성 섬유를 활용한 도로 포장층의 현장 적용 특성 (The Field Applicability of Road Pavement Layer with Grid Typed Reinforcement and Dispersive Fiber)

  • 박주원;김훈겸;김성보
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권3호
    • /
    • pp.53-59
    • /
    • 2018
  • 본 논문에서는 재활용 필름을 사용한 친환경 그리드형 보강재와 사전에 충진재의 혼입을 통해 분산성을 향상시킨 섬유를 도로 포장층에 복합적으로 적용한 공법의 현장 적용성을 분석하였다. 그리드형 보강재를 구성하고 있는 필름은 폐기된 PE수지를 재활용하여 친환경성을 강조하였고, 아스콘 혼입 섬유는 아스콘 충진재의 사전 혼입을 통한 섬유의 분산성을 확보한 것이다. 복합 섬유를 혼입한 교량 포장층을 시공함에 있어 발생할 수 있는 제반 상황을 사전에 인지할 수 있도록, Mock Up 포장층에 대한 기본적인 성능 분석을 실시하였다. 분석 결과, 친환경 그리드 보강재와 분산성 섬유를 함유한 포장층에서 강도 및 응력, 처짐 저항성에서 모두 기능성이 향상된 것을 확인할 수 있었다. 그러므로, 섬유 실제 현장 적용시 친환경성 재료 도입과 더불어 안전성 측면에도 효율적인 공법이라고 판단된다.

포스트 텐션 공법으로 보강된 SC 합성보의 휨 거동 (Flexural Behavior of Steel-Concrete Composite Beams Strengthened by Post Tension Method)

  • 류수현;김희철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권3호
    • /
    • pp.186-195
    • /
    • 2010
  • 본 논문은 SC합성보에 정착구의 높이, 새들의 형태, 가력시점을 변수로 하여 비부착 포스트텐션 보강을 하고 휨실험을 통해 보강방법을 평가하여 적절한 보강방법을 제시하고자 하엿다. 실험결과 보강 전 SC합성보의 최대내력은 실험값/이론값이 0.97로 나타났으나 보강 후는 1.00~1.21로 나타나 보강효과를 확인할 수 있었다. 변위 및 변형률 분석결과 정착구의 높이 및 가력시점에 상관없이 보강 후 중립축에 정착구를 설치한 D120계열 실험체가 최대하중이후 급격한 하중저하 없이 변위가 지속적으로 증가하며 각 부분의 변형률도 비교적 적게 나타나는 안정적인 거동을 했다. 보강효과면에서 선 가력 후 보강한 SCR-UD120실험체가 보강 전 SC합성보에 비해 최대내력이 1.72배 증가하여 가장 우수한 것으로 나타났다.

NATM 터널굴착시 응력-간극수압 연계 3차원 유한요소모델링을 통한 기존 지하철터널의 구조적 안정성 해석연구 (Structural Stability Analysis Study for Existing Subway Tunnels Using a 3D Stress-Pore Pressure Coupled Finite Element Modelling of NATM Tunneling)

  • 공병승
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권6호통권58호
    • /
    • pp.192-203
    • /
    • 2009
  • 본 연구는 경부고속철도(대구~부산) 도심통과 노반신설 공사중 기존 부산지하철 1호선 및 부산지하철 2호선 구간에 대한 안정성에 관한 연구로서 현장조사를 실시하여 대상시설물의 외관상태, 품질상태 및 내구성능 등을 평가하고 MIDAS/GTS를 이용한 수치해석을 통해 대상시설물 및 본선터널의 안정성을 검토하는데 그 목적이 있다. 지하수위 하에서 터널이 시공되는 기본 메카니즘과 3차원 유한요소해석 응력-간극수압 연계해석을 수행한 후 라이닝 작용하중, 막장안정성, 지표침하 등 지하수와 터널굴착의 상호관계를 고찰하였다. 수치해석의 결과 1, 2호선의 최대침하, 부등침하, 라이닝응력 등은 허용치 이내이며 손상 정도는 무시할 수 있는 정도의 경미한 것으로 나타나고 있다. 그러나 실제 터널 시공시 막장거동을 최소화하기 위하여 필요시 Pre-Grouting을 시행하여 터널 굴착시 터널내 유출수를 최소화하는 것이 필요할 것으로 판단된다.

폴리머가 프리믹스 타입의 보수용 모르타르의 성질에 미치는 영향 (Effects of Polymer in Properties of Pre-mixed Type Mortar for Concrete Repair)

  • 송형수;이진용;민창식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권4호
    • /
    • pp.153-159
    • /
    • 2006
  • 현재, 폴리머는 보수용 모르타르의 혼화재료로 주로 사용되고 있으며, 이러한 보수용 모르타르에는 폴리머 이외에 각종 혼화재료가 첨가되어 있다. 본 연구에서는 폴리머의 배합비율에 따라 보수용 모르타르에 미치는 영향과 동일한 EVA계 폴리머가 제조사가 다른 제품에 따라 미치는 영향을 비교하고자 모르타르의 굳기 전 특성 및 역학적 특성에 대하여 시험을 통하여 분석하였다. 시험결과 보수용 모르타르에 폴리머의 배합비율이 증가될수록 역학적 특성(압축강도, 휨 강도, 부착강도)이 개선되었으며, 또한 건조수축도 증가하였다.

멤브레인 방식 LNG탱크의 피로강도 평가법에 관한 연구 (I) (A Study on the Evaluation Method of Fatigue Strength of Membrane Type LNG Tank(I))

  • 김종호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제21권1호
    • /
    • pp.49-58
    • /
    • 1997
  • The membrane type LNG tank is non self-supporting tank which consists of both primary and secondary membrane supported through the insulation boxes by the adjacent hull struc¬ture. Although the membranes are not structural member. They are subject to periodical cyclic loads due to the thermal expansion and other expansions or contraction of membrane. At the design stage of the tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds is necessary in order to assist the designer and the inpector. In this study the evaluation method of fatigue strength of membrane type LNG tank is pre¬sented with FEM analysis and fatigue test of lap welds and it contains the following:1) The fatigue tests and preparation of design S - N curve for lap welds 2) FEM analysis of test specimens 3) Estimation of cumulative damage factor of lap welds 4) Guideline for inspection of lap welds of membrane type LNG tank As the results of analytical and experimental approaches in this study, the evaluation method of fatigue strengths of membrane type LNG tank is proposed, which is expected to be useful for design and inspection of membrane type LNG tank.

  • PDF

경부고속철도(대구-부산) 도심통과 노반신설 공사중 기존 지하철 터널구간의 구조적 안정성 검토 (Structure stability study for existing subway tunnel segment of Seoul-Busan high-speed railroad (Daegu - Busan) construction)

  • 공병승;김민호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1752-1759
    • /
    • 2007
  • In the new Seoul-Busan high speed railroad construction specially city center passage roadbed establishment is recommended the staibility for the existing subway tunnel segments of Busan subway line No. 1 and No.2. regarding the appearance condition, a quality condition and the durability of the objective facility site exact inspection, and it evaluates the numerical analysis which uses MIDAS GTS it leads and there is the objective of the place where the stability of the objective facility and this tunnel it investigates. To immediacy of the on-the-spot inspection result whole facility it is a condition where the reinforcement which is simple not to be hindrance is necessary, 2nd Line case it is a condition which transfer is good but the general defect and the damage which occur from the tunnel of NATM type were confirmed part. While roadbed establishment constructing that the continuous maintenance is necessary, it is judged. The result of 1st, 2nd Line maximum sinkage, unequal sinkage and the lining stress of numerical analysis are within permission and the damage degree is appearing with the fact that the degree it will can disregard it is slight. But it enforces necessary Pre-grouting in order to minimize an actual tunnel face conduct and when the tunnel is excavated it is judged with the fact that necessary to minimize the outflow possibility.

  • PDF

마커 검출 개선을 위한 RF-Marker기반 Mobile AR검사 시스템 (Mobile-AR Inspection System Based on RF-Marker to Improve Marker Detection)

  • 이정민;이경호;김대석
    • 한국CDE학회논문집
    • /
    • 제17권3호
    • /
    • pp.208-215
    • /
    • 2012
  • Augmented reality can help to improve user's engineering abilities such as perception and decision making in industry field. Therefore we have studied on the maintenance-supporting applications for inspectors previously. The advantage of pre-existing marker system is that the making and using are easier than any other feature tracking and detection methods. However it must to be exposed to the sufficient light to be detected by computer image processing. The most of industry field is not in clean environment and there are not sufficient light as well. So, the normal marker system is not appropriated for industrial fields. This paper suggests RFID-based marker system to improve marker-detection ability in our AR maintenance system. RFID is not implemented by image processing but it is implemented by electromagnetic induction. Therefore we could more precisely detect markers even if the environment is low-light intensity condition.