• 기술사
• /
• 제21권4호
• /
• pp.6-11
• /
• 1988

The study on the progress of automatic machining system has been active centering at the CNC machine tools recently to lead the applied production technology like unmaned machining to the practical level, and to make these application more efficient, they require detective method for tool wear and breakage while machining. In this study chiefly on turning, first derive cutting force about the tool surface by the cutting resistant sensor and with which change into electric signal and compare with the standards to make the tool life detection system to let know the tool life and study its application; the cutting resistance detected by the cutting resistant sensor has increased to the level of standards, the measuring system which can decide whether we change tools on the basis of comperative circuit is shown to be very reliable model for cutting tool life detection system.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.27-37
• /
• 2014

Purpose: The purpose of this study is to investigate the improvement measure of dental technicians practical examination system. Methods: The subjects in this study were 290 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 16.0. The collected data was analyzed by frequency and chi-square test. Results: Dental technician practical exam feasibility of survey were largely negative views. Articulators work required in practical exam as a tool used (28.7%), electric wax carver (19.5%), heating clear (17.8%), handpiece (16.2%) had a response. Dental Technician positions in accordance with practical exam in comparison to satisfaction, the professor is satisfied, but the clinical dental technicians were generally dissatisfied (p<0.05). Conclusion: Based on the results of this study, Current is necessary to analyze the practical test. It also should be compared with foreign institutions. Long-term and short-term improvement examination system that can be applied to the improvement of the dental technician to draw practical test it is necessary to improve the system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.319-323
• /
• 2002

Recently, new polishing system which was made by magnetic intelligent compound (MAGIC) was invented and, the study is going on for practical use the analysis of factors, that is, the kind of polishing grain, composition ratio of wheel elements, machining frequency, polishing pressure, which the main influence for polishing efficiency are the first step. In this study, analyzed influence of wheel raw material composition ratio on surface roughness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.185-189
• /
• 2001

In order to prevent the production defects the optimum design of product, jig and fixture putting in the field is very significant manufacturing method. Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and jig & fixture structure, machining condition for tool making, tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, Auto Lisp database, that we made by database, and window environment. Especially this study is reveals with the analysis of part drawing, jig planning, jig design etc, and then the result of drill jig's making try out.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1253-1258
• /
• 2013

Ceramic particles as polishing abrasives are often used in a magnetic abrasive polishing process because they have strong wear resistance. Non-ferromagnetic ceramic abrasives should be mixed with ferromagnetic iron particles for controlling the mixture within a magnetic brush during the polishing process. This study describes the application of the ceramic particles for the magnetic abrasive polishing. The distribution of the magnetic abrasives attached on a tool varies with magnetic flux density and tool rotational speed. From the correlation between abrasive adhesion ratio in the tool and surface roughness produced on a workpiece, practical polishing conditions can be determined. A step-over for polishing a large sized workpiece is able to be selected by a S curve, and an ultrasonic vibration assisted MAP produces a better surface roughness and increases a polishing efficiency.

• 실천공학교육논문지
• /
• 제9권2호
• /
• pp.119-124
• /
• 2017

사출성형 시 유압실린더의 힘으로 스크류가 앞으로 전진하는 동안, 금형의 러너시스템은 성형품 형상의 캐비티 내를 충진시키는 유로로 용융된 수지의 충진, 패킹과정에 관계되며, 이는 스프루(sprue), 러너(runner), 게이트(gate)에 의해서 성형품의 외관, 수지의 물성, 치수 정밀도 및 성형 사이클 등에 큰 영향을 준다. 러너, 게이트 설계가 잘못된 피드시스템은 다양한 성형불량을 일으키므로 이를 방지할 수 있는 최적의 러너밸런스를 유지하는 것이 중요하다. 사출금형을 제작하는 업체에서 응용할 수 있는 실무적인 금형기술 지식을 향상시키기 위해서 기술적인 애로분야에 대한 기술지도를 바탕으로 금형기술 과정의 훈련모델을 제시한다.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.9-15
• /
• 2011

In order to develop a practical postprocessor for 5-axis machining, the general equations of numerically controlled (NC) data for 5-axis configurations with not only non-orthogonal rotary axes but also orthogonal rotary axes were exactly expressed by the inverse kinematics, and a Windows-based postprocessor written in Visual Basic was developed according to the proposed algorithm. The developed postprocessor is a general system that suitable for all kinds of 5-axis machine tool with orthogonal and non-orthogonal rotary axes. Through implementation of the developed postprocessor and verification by a cutting simulation and machining experiment, the effectiveness of the proposed algorithm is confirmed. Compatibility is improved by allowing exchange of data formats such as rotational tool center position (RTCP) controlled NC data, vector post NC data, and program object file (POF) cutter location (CL)data, and convenience is increased by adding the function of work-piece origin offset. Consequently, the technology of practical post-processor for 5-axis machining is developed.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.489-495
• /
• 2013

This study analyzed thevariation in the cutting force when the cutting area of a terrace volume is machined, which is generally left after the rough cutting of a sculptured surface. The numerically simulated results for the cutting forces are compared with cutting force measurements by considering the theoretical prediction of the cutting area formation and specific cutting volume. The variation in the cutting force is measured using a dynamometer installed on a machining center for 19 different kinds of test pieces, which are selected according to the variation in the terrace volume factor, tool diameter factor, and cutting depth factor. As a result, it is verified that the cutting forces evaluated by the numerical analysis coincide with the measured cutting forces, and it is proposed as a practical cutting force prediction model.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.90-95
• /
• 2012

The sheet metal forming proceccing is very important and indispensable in the automotive industry because the accuracy of prsee worked parts is directly related to the automotive quality. But when making mold it is difficult and expensive to modify mold. mold design technology is a critical technology in press plastic working. When design the mold there are lots of variables in press plastic working according to worked material, mold materials, conditions of heat treatment, clearance and so on. Abrasion of mold depends on these kind of conditions and sheared surface which is crucial for quality of product also depends on them. In this study, we conduct research on abrasion loss of mold according to 8, 10 and 12% of clearance for thickness of 1.0mm of worked material out of mold design variables of the products whose worked materials are high carbon steel and carbon tool steel by a practical experiment and perform a comparative evaluation of difference of abrasion loss mold with the alloy tool steel (STD11) and Tungsten Carbide (WC).

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 춘계학술발표대회
• /
• pp.582-585
• /
• 2014

Visualization is a science which makes the invisible to visible through the techniques of experimental visualization and computer-aided visualization. This paper presents the practical aspects of visualization of multivariate dataset. In this paper, we will briefly discuss a previous research work and introduce a new visualization technique which will help us to design and develop a visualization tool for experimental visualization of multivariate dataset. Our newly developed visualization tool can be used in various domains. In this paper, we have chosen a software industry as an application domain and we used the multivariate dataset of software components computed by VizzMaintenance. VizzMaintenance is software analysis tool which give us multiple software metrics of open source Java based programs. Main objective of this research is to develop a new visualization tool for large multivariate dataset which will be more efficient and easy to perceive by viewer. Perception is very important for our research work and we have decided to test the perception level of our proposed visualization approach by researchers of our research lab.