Browse > Article
http://dx.doi.org/10.7735/ksmte.2013.22.3.489

Cutting Force Variation Characteristics in End Milling of Terrace Volume  

Maeng, Heeyoung (Dept. of Mechanical System Design Engineering, Seoul National University of Science & Technology)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.22, no.3_1spc, 2013 , pp. 489-495 More about this Journal
Abstract
This study analyzed thevariation in the cutting force when the cutting area of a terrace volume is machined, which is generally left after the rough cutting of a sculptured surface. The numerically simulated results for the cutting forces are compared with cutting force measurements by considering the theoretical prediction of the cutting area formation and specific cutting volume. The variation in the cutting force is measured using a dynamometer installed on a machining center for 19 different kinds of test pieces, which are selected according to the variation in the terrace volume factor, tool diameter factor, and cutting depth factor. As a result, it is verified that the cutting forces evaluated by the numerical analysis coincide with the measured cutting forces, and it is proposed as a practical cutting force prediction model.
Keywords
End milling; Terrace volume; Tool diameter factor; Cutting depth factor; Cutting force prediction model;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Bae, H. J., Park, H. S., 2004, Analysis of Working Factors for Improvement of Surface Roughness on High Speed End-Milling, Journal of Korean Society of Precision Engineering, 21:6 52-59.   과학기술학회마을
2 Altintas, Y., Yellowley, I., 1989, In-process Detection of Tool Failure in Milling Using Cutting Force Models Trans. of the ASME, J. of Engineering for Industry, 111:1 149-157.   DOI
3 Watanabe, T., Iwai, S., 1983, A Control System to Improve the Accuracy of Finished Surfaces in Milling, Trans. of the ASME, J. of Engineering for Industry, 105:3 192-199.
4 Tam, J. H., Tomizuka, M., 1989, On-line Monitoring of Tool and Cutting Conditions in Milling, Trans. of the ASME, J. of Engineering for Industry, 111:4 206-212.   DOI
5 Kline, W. A., Devor, R. E., 1982, The Prediction of Surface Accuracy in End Milling, Trans. of the ASME, J. of Engineering for Industry, 104:2 272-278.   DOI
6 Kim, B. J., 2001, A Study on Cutting Force Characteristics in the End Milling of Rough Cut Terrace Volume Master Thesis, Seoul National Univ. of Science & Technology, Republic of Korea.
7 Kim, D. H., Kim, J. S., Woo, Y. W., Lee, H. H., 2007, A Study on the Performance Evaluation of End Mill Tool Fabricated by Ultra-Fine WC, Journal of the KSMTE, 16:6 1-8.   과학기술학회마을
8 Centinkunt, S., Tasii, T., 1999, Position Error Compensation of Contour End-Milling, Int. J. Mach. Tools & Manufacture, 30:4 613-620.   DOI