• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.659-660
• /
• 2016

This paper presents an improved evaluation method, based on National Competency Standards (NCS), of National Technical Qualification (NTQ) examination in Electronics Fields such as Craftsman Computer, Industrial Engineer Computer Maintenance Control, Engineer Computer System Application, Engineer Computer, Engineer Embedded) to reflect practical vocational abilities and raise values of NTQ certificates. To evaluate each NTQ examination, we carefully chose corresponding NCS competency units for practical performance test, written subjective test, and mixed test through the advisory committee with industry, education, and qualification experts. In addition, we verified useful effects of the NCS-based evaluation method by performing and analyzing the simulated tests. We used both single and mixed problems in practical performance test and new problems about system design and implementation based on various working scenarios in written subjective test.

• Journal of Power Electronics
• /
• v.4 no.1
• /
• pp.46-55
• /
• 2004

This paper presents a high-frequency ZVS-PWM boost chopper-fed DC-DC converter with a single active auxiliary edge resonant snubber in the load-side which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of ZVS-PWM boost chopper-fed DC-DC converter proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory, the temperature performance of IGBT module, the actual power conversion efficiency and the EMI of radiated and conducted emissions. And then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn off mode transition with the aid of an additional lossless clamping diode loop, and reduced the EMI conducted emission in this paper.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.359-368
• /
• 2015

In this paper, we investigate the capture effect through experiments conducted with Iris nodes equipped with AT86RF230 radio transceivers. It is shown that the first arriving packet in a collision can capture the radio channel for equal power transmissions and may be decoded depending on the amount of overlap. A new 3-packet-capture scenario is introduced and implemented. To be able to understand the impact of capture on the throughput performance of wireless sensor networks, we present an analysis of the capture coefficient using our practical results. For real-world implementations, the throughput of pure ALOHA considering a finite number of users is presented in analytical form. The capture coefficient is then applied to pure ALOHA as a case study. Using analytical and practical implementations of the capture effect on ALOHA, a very good match in channel throughput performance enhancement is demonstrated over the non-capture effect case. TinyOS-2.x is used to program the nodes and to observe data exchange on a computer through a base station.

• Journal of Information Processing Systems
• /
• v.11 no.2
• /
• pp.205-228
• /
• 2015

In this paper, we present a virtual laboratory platform (VLP) baptized Mercury allowing students to make practical work (PW) on different aspects of mobile wireless sensor networks (WSNs). Our choice of WSNs is motivated mainly by the use of real experiments needed in most courses about WSNs. These experiments require an expensive investment and a lot of nodes in the classroom. To illustrate our study, we propose a course related to energy efficient and safe weighted clustering algorithm. This algorithm which is coupled with suitable routing protocols, aims to maintain stable clustering structure, to prevent most routing attacks on sensor networks, to guaranty energy saving in order to extend the lifespan of the network. It also offers a better performance in terms of the number of re-affiliations. The platform presented here aims at showing the feasibility, the flexibility and the reduced cost of such a realization. We demonstrate the performance of the proposed algorithms that contribute to the familiarization of the learners in the field of WSNs.

• Research in Community and Public Health Nursing
• /
• v.21 no.4
• /
• pp.468-480
• /
• 2010

Purpose: This study was to describe and develop public health nursing. Methods: Data were collected from 19 nurses sampled from 5 public health centers. The grounded theory of Strauss and Corbin (1990) was applied. Results: As a result, 48 concepts, 23 subcategories, and 11 categories were deduced from open coding. In axial coding, casual conditions 'facing difficulties of practical administration' and 'attaching importance to health support for residents' and context condition 'assessing of residents' service needs' impacted phenomenon 'searching for efficient performing methods.' Intervening conditions 'forming of support system' and 'working with positive,' and action-interaction conditions 'improving of resident's health and medical accessibility' and 'striving for self-development' lead to consequences 'carried out promptly for field-based problem solving,' 'mastered of successful program planning methods' and 'solving the issues with existing style.' The periods of process were divided into 4 stages, confirming program-contents, probing program-method, developing program-strategies, and applying program-competencies. The core category, ‘strengthening of practical-planning work competencies' incorporated the relationship between and among all categories and explained the process. Conclusion: This study described public health nurses' performance in Korea. These findings have important implications for the practice and must be considered to develop competencies for planning and practice of public health.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1110-1116
• /
• 1993

A study on optimum operation performances of power efficiency, economy and exhaust emissions for a tractor was conducted. A mathematical model of multiple degree polynomial equation was applied to established the function of solid multiple parameter curves for specific fuel consumption (ge), cabon monoxide (CO) ,hydrcarbons (HC) and cabonaceous smoke (Rb). The optimum operation theorems for economy operation indicated by ge and for exhaust emissions described by Co , HC and Rb were obtained from analytical method and performance test data. The optimum operation theorems could exhibit optimum operation working points, curves, and regions. The optimum matching relations of engine speed and transmission parameters were analyzed by using computer simulation methods in accordance with the tractor specifications , actual farm working conditions in a typical drawbar pull work such as plowing , the optimum operation objective function, the ideal transmission ratio, practical gear shif ing positions and practical travel speed of the tractor TN55 medel. The results of the anlayzes indicated clearly that the optimum power efficient operation, energy saving and pollution reducing would be realized if the tractor would be operated according to theoptimum operation methods.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1329-1336
• /
• 1996

In many image compression applications, the discrete cosine transform (DCY) is well known for is highly efficient coding performance. However, it produces undesirable block artifacts in low-bit rate coding. In addition, in many practical applications, faster computation and easier VLST implementation of DCT coefficients are also important issues. The removal of the block artifacts and faster DCT computation are therefor of practical interest. In this paper, a modified DCTcomputation scheme was investigated, which provides a simple efficient solution to the reduction of the block artifacts while achieving faster computation. We have applied the new ap-proach to the low-bit rate coding and decoding of images. Simulation results on real images have verified the improved performance of the proposed method over the standar d method.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.582-591
• /
• 2010

Probabilistic modeling and analysis of correlation metrics have been receiving considerable interest for a long period of time because they can be used to evaluate the performance of communication receivers, including satellite broadcasting receivers. Although differential correlators have a simple structure and practical importance over channels with severe frequency offsets, closedform expressions for the output distribution of differential correlators do not exist. In this paper, we present detection error probability expressions for frame synchronization using differential correlation, and demonstrate their accuracy over channel parameters of practical interest. The derived formulas are presented in terms of the Marcum Q-function, and do not involve numerical integration, unlike the formulas derived in some previous studies. We first determine the distributions and error probabilities for single-span differential correlation metric, and then extend the result to multispan differential correlation metric with certain approximations. The results can be used for the performance analysis of various detection strategies that utilize the differential correlation structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.930-935
• /
• 2001

The experimental characterization of hydrodynamic bearing spindle motor is performed for the practical implementation of high-performance hard disk drive system. Firstly, the design concept of hydrodynamic bearing for the disk drive system is addressed including the herringbone grooved journal bearing, the spiral grooved thrust bearing, capillary seal design, and the viscous pumping of fluid. Secondly, the experimental evaluation is performed for the disk drive system in which the hydrodynamic bearing spindle motor is implemented and its dynamic performances are compared with conventional ball-bearing spindle motor. The key parameters include NRRO(Non Repeatable Run-Out), disk dynamics, acoustics, and resultant PES (Position Error Signal). Finally, the external gyro-exciting test results including 200k CSS(Continuous Start-Stop) on three angular attitudes(0,90, 180 degree) are presented in order to verify the practical reliability of disk drive system subject to the gyro-motion of hydrodynamic bearing spindle motor.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.2
• /
• pp.234-245
• /
• 2012

This study aims to analyze the factors of the extra-curricula area in personal school performance record and propose the practical strategies for entrance examination affairs on this area. To address this goal, we have applied a SWOT analysis with related documents and research results. We found out five strengths: (S1) Link the students' experience to right people for the university, (S2) Quantitative Indicators, (S3) Qualitative Indicators, (S4) Link to other evaluation factors, and (S5) Analysis of Human Resource. The weakness included: (W1) Fairness, (W2) Reliability, (W3) Difficulties to set standards, (W4) Difficulties to set environments, and (W5) Lack of systemic experience of an evaluation. We also discovered five opportunities (O1) Recognition of public education, (O2) The need of national support, (O3) The importance of autonomy, (O4) Specialization, and (O5) Networks. Finally, threat factors consisted of: (T1) Frequent change of educational policy, (T2) Increasing of private education, (T3) Lack of information and preparation time, and (T4) The accuracy and reliability of personal school records. Based on these results, we suggested practical strategies with these four dimensions: S-O, W-O, S-T, and W-T.