• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1806-1813
• /
• 2012

본 논문은 도서지역에서 현실적으로 가장 간단히 적용될 수 있는 풍력-디젤 하이브리드 발전시스템의 모델링 방법을 제시하였다. 모델링 대상으로는 풍력발전기는 농형유도발전기를, 디젤발전기는 동기발전기를 대상으로 하였고, 각각에 대한 파라미터 설정과 제어기의 모델링은 현재 제작 및 판매되고 있는 소용량급들에 대한 자료수집과 분석을 통하여 도출된 기준값에 근거하였다. 제안된 풍력-디젤 하이브리드 발전시스템 모델링방법의 타당성을 입증하기 위하여 국내 낙도지역을 대상으로 하여 모델링하고, 그 결과를 시뮬레이션하여 고찰하였다.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.105-112
• /
• 2007

The linkage framework of geometric modeling based on NURBS(Non-Uniform Rational B-Spline) surface and shell finite analysis is developed in the present study. For this purpose, geometrically exact shell finite element is implemented. NURBS technology is employed to obtain the exact geometric quantities for the analysis. Especially, because NURBS is the most powerful and wide-spread method to represent general surfaces in the field of computer graphics and CAD(Computer Aided Design) industry, the direct computation of surface geometric quantities from the NURBS surface equation without approximation shows great potential for the integration between geometrically exact shell finite element and geometric modeling in the CAD systems. Some numerical examples are given to verify the performance and accuracy of the developed linkage framework. In additions, trimmed surfaces with some cutouts are considered for more practical applications.

• 한국시뮬레이션학회논문지
• /
• 제11권1호
• /
• pp.71-82
• /
• 2002

One of the most important things in the research for MIN-based switch operation the management scheme of network cycle. In the traditional MIN, when the receving buffer module is empty, the sell has to move forward the front-most buffer position by the characteristic of the conventional FIFO queue. However, most of buffer modules are almost always full for practical amount of input loads. The long network cycle of the traditional scheme is thus a substantial waste of bandwidth. In this paper, we propose the modeling method for the input and multi-buffered MIN with unit step buffering scheme, In spite of simplicity, simulation results show that the proposed model is very accurate comparing to previous modeling approaches in terms of throughput and the trend of delay.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.39-47
• /
• 2005

Different CAx systems are being utilized throughout the product lifecycle due to the practical reasons in the supply chain and design processes. One of the major problems facing enterprises of today is how to share and exchange data among heterogeneous applications. Since different software applications use different terminologies, it is difficult to share and exchange the product data with internal and external partners. This paper presents a method to enhance the CAD model interoperability based on feature ontology. The feature ontology has been constructed based on the feature definition of modeling commands of CAD systems. A method for integration of semantic data has been proposed, implemented, and tested with two commercial CAD systems.

• 대한전기학회논문지
• /
• 제34권8호
• /
• pp.308-316
• /
• 1985

This paper proposes an analytic tool for long-term generation expansion planning based on the maximum principle. Many research works have been performed in the field of generation expansion planning. But few works can be found with the maxinmum principle. A recently published one worked by professor Young Moon Park et al. shows remarkable improvements in modeling and computation. But this modeling allows only thermal units. This paper has extended Professor Park's model so that the optimal pumped-storage operation is taken into account. So the ability for practical application is enhanced. In addition, the analytic supply-shortage cost function is included. The maximum principle is solved by gradient search due to its simplicity. Every iteration is treated as if mathematical programming such that all controls from the initial to the terminal time are manipulated within the same plane. Proposed methodology is tested in a real scale power system and the simulation results are compared with other available package. Capability of proposed method is fully demonstrated. It is expected that the proposed method can be served as a powerful analytic tool for long-term generation expansion planning.

• Korean Journal of Hydrosciences
• /
• 제8권
• /
• pp.125-136
• /
• 1997

The simulation techniques of hydrologic data series have develped for the purposes of the design of water resources system, the optimization of reservoir operation, and the design of flood control of reservoir, etc. While the stochastic models are usually used in most analysis of water resources fields for the generation of data sequences, the indexed sequential modeling (ISM) method based on generation of a series of overlapping short-term flow sequences directly from the historical record has been used for the data generation in the western USA since the early of 1980s. It was reported that the reliable results by ISM were obtained in practical applications. In this study, we generate annual inflow series at a location of Hong Cheon Dam site by using ISM method and autoregressive, order-1 model (AR(1)), and estimate the drought characteristics for the comparison aim between ISM and AR(1).

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.705-711
• /
• 2012

The purpose of this study is to develop the model to estimate the penetration rate of metal under a high power continuous wave laser irradiation. To estimate it, an empirical modeling is more practical when the penetration phenomena of metal by laser irradiation is too complex to be analyzed by the numerical simulation. When several methods published earlier were applied to our results, we found out that their methods were not appropriate as the model. Therefore, we suggested the new empirical method considering effective intensity as a key variable. As a result, we confirmed that the new method was effective to model the penetration rate of SUS304 metal and expected that it could be available to other metals.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.148-156
• /
• 2018

교량 구조물 거동의 건전성 평가는 하중재하-처짐의 정적특성과 충격계수와 고유진동수 등의 동적특성으로 평가하는 것이 일반적이며, 이를 수치해석적 방법으로 비교 분석하는 것이 합리적인 방법이라 할 수 있다. 사용하중에 대한 거동은 탄성영역에서 이루어지므로 실물구조체와 수치해석의 결과는 일체성을 보이지만, 동적특성의 경우 특히, 진동학적 분석에 있어서는 구조물의 기하형상과 사용재료의 이질성에 기인하여 실물 구조체의 결과와 다소 차이를 보인다. 이러한 오차를 수렴시키기 위하여 본 연구는 실물 모형체의 실험결과를 바탕으로 다양한 수치해석적 모델을 제시하고 그 예민도를 분석함으로써, 교량 구조물 평가를 위한 실용적인 모델링 기법을 도출하여 안정적인 예비 해석 결과를 제공하는데 그 목적이 있다. 프리스트레스트 콘크리트 구조물의 긴장재를 환산단면으로 치환한 모델을 기반으로 긴장재의 탄성적 특성을 반영한 모델과 수정된 탄성계수를 적용한 모델의 고유진동수가 실물 모형체의 그것과 가장 유사한 결과를 얻을 수 있었다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권3호
• /
• pp.171-190
• /
• 2008

With growing applications of wireless video streaming, an efficient video traffic model featuring modern high-compression techniques is more desirable than ever, because the wireless channel bandwidths are ever limited and time-varying. We propose a modeling and analysis method for video traffic by a class of stochastic processes, which we call '$GEO^Y/G/{\infty}$ input processes'. We model video traffic by $GEO^Y/G/{\infty}$ input process with gamma-distributed batch sizes Y and Weibull-like autocorrelation function. Using four real-encoded, full-length video traces including action movies, a drama, and an animation, we evaluate our modeling performance against existing model, transformed-M/G/${\infty}$ input process, which is one of most recently proposed video modeling methods in the literature. Our proposed $GEO^Y/G/{\infty}$ model is observed to consistently provide conservative performance predictions, in terms of packet loss ratio, within acceptable error at various traffic loads of interest in practical multimedia streaming systems, while the existing transformed-M/G/${\infty}$ fails. For real-time implementation of our model, we analyze G/D/1/K queueing systems with $GEO^Y/G/{\infty}$ input process to upper estimate the packet loss probabilities.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.33-42
• /
• 2016

Spacer grids play an important role in maintaining the proper form of the fuel assembly structure and ensuring the safety of reactor core design. This study applies the Monte Carlo method to the analysis of the neutronics effects of spacer grids in a typical pressurized water reactor (PWR). The core problem used to analyze the neutronics effects of spacer grids is a modified version of Korea Advanced Institute of Science and Technology benchmark problem 1B, based on an Advanced Power Reactor 1400 (APR1400) core model. The spacer grids are modeled and added to this test problem in various ways. Then, by running MCNP5 for all cases of spacer grid modeling, some important numerical results, such as the effective multiplication factor, the spatial distributions of neutron flux, and its energy spectrum are obtained. The numerical results of each case of spacer grid modeling are analyzed and compared to assess which type has more advantages in accuracy of numerical results and effectiveness in terms of geometry building. The conclusion is that the most realistic modeling for Monte Carlo calculation is the "volume-preserving" streamlined heterogeneous spacer grids, but the "banded" dissolution spacer grids modeling is a more practical yet accurate model for routine (deterministic) analysis.