• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1043-1050
• /
• 2011

This paper presents practical results for the estimation of vibration level inside a powertrain based on the rigid body theory and measurement. The vibration level of inside powertrain has been used for the calculation of excitation force of an engine indirectly. However it was difficult to estimate or measure the vibration level inside of a powertrain when a powertrain works on the driving condition of a vehicle. To do this work, the rigid body theory is employed. At the first, the vibration on the surface of a powertrain is measured and its results are secondly used for the estimation the vibration level inside of powertrain together with rigid body theory. Also did research on how to decrease the error rate when the rigid body theory is applied. This method is successfully applied to the estimation of the vibration level on arbitrary point of powertrain on the driving condition at the road.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.205-215
• /
• 1996

In this paper, the performance analysis of the vehicle with the Ravigneaux type automatic transmission has been carried out using information of engine and drivetrain. It is necessary to understand the overall system including engine, torque converter, clutch, planetary gears, and road load. The equations of motion are derived from dynamic model. The GUI computer simulation program has been developed to analyze the powertrain performance of the vehicle with the Ravigneaux type automatic transmission.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.967-976
• /
• 2012

본 논문은 자동차 환경규제에 따른 CO2 감소 및 연비향상을 위하여 Stop&Go 기능을 적용한 소형 승용차에 대한 파워트레인 마운트 (Powertrain Mount) 의 진동 소음 최적화 방향을 제시하였다. 이를 위해 현재 "A" 차량에 적용중인 파워트레인 마운트 시스템을 분석한 후 다구찌 기법을 활용하여 파워트레인 마운트에 적용된 고무 동특성에 대한 다양한 변수를 제시하였고, 고무의 동특성 변수에 의해 만들어진 테스트 제품을 AHP(Analytic Hierarchy Process)기법을 적용하여 Stop&Go 기능에 적합한 진동 소음의 최적화 정도를 검증하였다. 이와 같은 시스템을 파워트레인 마운트의 초기 디자인 검증에 적용함으로써, 파워트레인 마운트의 고무 동특성에 대한 엔지니어링 노하우 (Engineering Know-How) 없이도 엔진의 움직임으로 야기되는 진동 소음의 문제점을 파악하고 이를 효과적으로 제어하는데 큰 역할을 할 것으로 예상된다.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.100-107
• /
• 2004

The development of a Web-based powertrain performance simulation system is introduced. The development approach of system architecture and each module is introduced along with the H/W and S/W used. The interface with all users is developed via a JAVA Applet. The powertrain modeling and other job history data of a user is managed systematically on the server by database to increase the reusability of the data. A self-developed program using object-oriented programming is used as a solver for the performance simulation. The graph tool for the analysis of simulation results has the collaboration support developed based on JAVA so that synchronous users can view the same result. As a result, the powertrain simulation is possible only with Web-browser for the user and the collaboration support among the relevant engineers is possible.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.27-33
• /
• 1998

The powertrain is a system of exciters which are connected by vibration transmitters and noise radiators. The powertrain has infinite natural frequencies. If the engine explosion, excites a certain natural frequency, then the powertrain system seriously vibrates. The torsional vibration arises from here. Torsional vibration like this can cause various noises as rattle and booming. In this study, the simulation models of multiple degrees of freedom were developed to reduce the torsional vibration of the powertrain. These models are combined mass moment of inertias with torsional springs. The free and forced vibration analyses were carried out by these models; and the validity of the simulation models were checked by the field test. The reduction effect of the torsional vibration along the driveline design factor is presented by the analytical results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.501-506
• /
• 2007

Structure-borne noise is the interior noise that results from the low frequency vibrational energy transmitted through those body and joint parts. The relation between the excitation of powertrain and resultant interior sound must be analyzed in order to identify and predict the structure borne noise. The method of acoustic source excitation is preferred than the method of mechanical force excitation to measure the NTF(noise transfer function). Because acoustical method is more convenient and reliable. In this paper, to analysis and identify vehicle interior noise by powertrain is performed, and the vibro-acoustic transfer function is extracted from experimental measurement. These are important step of TPA(transfer path analysis) to identify effect of interior noise resulted from powertrain running excitation.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.177-183
• /
• 2003

Vibration analysis using component mode synthesis method was carried out to identify that to some extent each component contributed to the whole vibration of a powertrain consisting of several components. This analysis helped decide the component to be modified to reduce the powertrain weight, without degrading its current vibration characteristics. As a result, a cylinder block was chosen as a redesign object. Topology optimization analysis was performed to design the topology of the cylinder block whose flange connected with the transmission was chosen to be the design domain. After all, a new prototype of cylinder block was manufactured based on the analysis results for the verification experiment. It was confirmed from the analytical and experimental results that u optimally designed cylinder block had an advantage over the current one in the powertrain weight, with the powertrain vibration characteristics improved slightly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1747-1750
• /
• 2003

The development of a Web-based powertrain performance simulation system is introduced. The development approach of system architecture and each module is introduced along with the H/W and S/W used. The interface with all users is developed via a JAVA applet. The powertrain modeling and other job history data of a user is managed systematically on the server by database to increase the reusability of the data. A self-developed program using object-oriented programming is used as a solver for the performance simulation. The graph tool for the analysis of simulation results has the collaboration support developed based on JAVA so that synchronous users can view the same result. As a result, the powertrain simulation is possible only with Web-browser for the user and the collaboration support among the relevant engineers is possible.