• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.293-301
• /
• 2011

This paper presents a novel theoretical method based on power analysis to obtain voltage reference values for an inverter-based compensator. This type of compensator, which is installed in parallel with the load, is usually referred to as the active filter. The proposed method is tailored to design the compensator in such a way that it can simultaneously balance the asymmetric load, as well as correct the power factor of the supply side. For clarity, a static compensator is first considered and a recursive algorithm is utilized to calculate the reactance values. The algorithm is then extended to calculate voltage reference values when the compensator is inverter based. It is evident that the compensator would be asymmetric since the load is unbalanced. The salient feature associated with the proposed method is that the circuit representation of system load is not required and that the load is recognized just by its active and reactive consumptions. Hence, the type and connection of load do not matter. The validity and performance of the new approach are analyzed via a numerical example, and the obtained results are thoroughly discussed.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.515-522
• /
• 1999

형광등용 전자식 안정기의 개발에 있어서, 최근 선전류 고조파 성분의 제한에 관한 여러 가지 규제를 만족시키기 위해 역률 개선 회로를 부가하는 것이 권장되고 있다. 일반적으로는 부스트 컨버터를 가장 많이 사용하고 있지만 전체 제품의 가격 상승 및 EMI 발생 등의 단점 때문에 설계에 있어서 상당한 제약을 받게 된다. 본 논문에서는 역률 개선을 수동소자로만 이용하여 전압원 및 전류원 방식의 공진형 인버터를 채택하는 형광등용 전자식 안정기를 저가격화, 고역률화하는 것을 목적으로 한다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.309-318
• /
• 2015

This study proposes a dual-output single-stage bridgeless single-ended primary-inductor converter (DOSSBS) that can completely remove the front-end full-bridge alternating current-direct current rectifier to accomplish power factor correction for universal line input. Without the need for bridge diodes, the proposed converter has the advantages of low component count and simple structure, and can thus significantly reduce power loss. DOSSBS has two uncommon output ports to provide different voltage levels to loads, instead of using two separate power factor correctors or multi-stage configurations in a single stage. Therefore, this proposed converter is cost-effective and compact. A magnetically coupled inductor is introduced in DOSSBS to replace two separate inductors to decrease volume and cost. Energy stored in the leakage inductance of the coupled inductor can be completely recycled. In each line cycle, the two active switches in DOSSBS are operated in either high-frequency pulse-width modulation pattern or low-frequency rectifying mode for switching loss reduction. A prototype for dealing with an $85-265V_{rms}$ universal line is designed, analyzed, and built. Practical measurements demonstrate the feasibility and functionality of the proposed converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.263-266
• /
• 2003

The high power factor converters are classified step-up, step-up-down and step-down converter, The power conversion system must be increased switching frequency in order to achieve a small size, a light weight and a low noise. And the power system brings on a high efficiency and high power factor. When a switch of the step down converter is operated with a commercial frequency(60Hz), a reactor using the converter is gone with a great number of harmonics waveforms of low grade. As results of this, the converter is decreased input power factor and is increased system size. To improved these, this paper proposes a PSM(Pulse Size Modulation) control strategy operated with high power factor.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1507-1513
• /
• 1999

This paper describes simulation and experimental results to analyze the dynamic characteristics of STATCOM, which is connected to the ac system for compensation the power factor and improving the voltage stability. The simulation and experimental results confirm that the scaled model for STATCOM can properly compesate the power factor of the load and regulate the bus voltage at the common connection point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1038-1040
• /
• 1993

Single phase AC to DC Boost-converter which is control led with a variable hysteretic current mode for improvent of input power factor makes high power factor possible. Power Factor correction circuit can be identified with a determination of each parameters. A simaluation and experiment result to load and parameter variation is examined.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.297-304
• /
• 2015

A conventional single-phase high-power system typically generates a large AC line input current at universal 90 VAC condition. Sometimes, this phenomenon can block the Earth Leakage Circuit Breaker (ELCB), which causes problems. Replacing power facilities is essential to ensure smooth operations. Thus, this paper proposes a method that can drive higher power than the limit of conventional power facilities. The proposed method can reduce the large AC line input current by limiting the input power of Power Factor Correction (PFC). An additional battery circuit can supplement the power deficiency. Specifically, a bidirectional converter with charging and discharging functions was adopted for the battery circuit. Finally, the validity of the proposed system could be confirmed by modal analysis and simulation, and an experiment in 2 KW condition was implemented with a prototype sample as well.

• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.23-34
• /
• 2018

본 논문에서는 고효율 고역률 LED 조명장치용 전원공급장치를 제안한다. 제안한 전원공급장치는 풀브리지 다이오드 정류기와 플라이백 컨버터로 구성된 단일단 전력구조이며, 이에 따라 하나의 제어기 IC와 하나의 전력반도체스위치만을 사용하여 역률개선과 출력전압조정을 동시에 수행한다. 또한 제안한 전원공급장치는 회생스너버를 이용하여 주스위치의 전압스트레스와 스위칭손실을 감소시키며, 동기정류기를 이용하여 시스템 효율을 향상한다. 적용된 동기정류기는 새로운 전압구동형이며 동작과 구성이 간단하다. 본 논문에서는 역률개선부와 주전력변환부의 동작분석을 통하여 제안한 전원공급장치의 동작원리를 설명하고 동기정류기의 동작에 관하여 간략하게 설명한다. 또한 40W급 프로토타입 전력회로의 설계예시를 제시하며, 설계된 회로파라미터들에 의해 제작된 프로토타입의 실험 결과를 통하여 제안한 전원공급장치의 동작특성을 입증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.132-134
• /
• 1993

A new Zero-Current Switched(ZCS) High Power Factor Rectifier for the. power factor correction is proposed. The proposed single phase rectifier enables a zero-current switching operation of all the power devices allowing the circuit to operate at high switching frequencies and high power levels. A dynamic model and a predictive current control technique for the ZCS-High Power Factor Rectifier(HPFR) are proposed. With the proposed dynamic model, an analysis for the internal operational characteristics is explored. With the proposed control technique, the unity power factor.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.519-526
• /
• 2003

본 논문은 단상 SRM 구동을 위한 1단 방식의 역률 보상형 컨버터에 관한 연구이다. 기존의 SRM 구동에서의 역률 보상회로는 2단 방식의 구조로 구성이 복잡하고 소자의 수가 증가하여 경제적으로 불리한 단점을 가진다. 따라서, 부가적인 회로의 추가 없이 1단 방식의 단위 역률이 가능한 단상 SRM 구동회로를 제안한다. 제안된 회로에 대한 타당성을 시뮬레이션과 실험으로 검증한다.