• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.21-44
• /
• 2017

Accelerated life tests (ALTs) are frequently used in manufacturing industries to evaluate the reliability of products within a reasonable amount of time and cost. Test units are subjected to elevated stresses which yield quick failures. Most of the previous works on designing ALT plans are focused on tests that involve a single stress. Many times more than one stress factor influence the product's functioning. This paper deals with the design of optimum modified ramp-stress ALT plan for Burr type XII distribution with Type-I censoring under two stress factors, viz., voltage and switching rate each at two levels- low and high. It is assumed that usage time to failure is power law function of switching rate, and voltage increases linearly with time according to modified ramp-stress scheme. The cumulative exposure model is used to incorporate the effect of changing stresses. The optimum plan is devised using D-optimality criterion wherein the ${\log}_{10}$ of the determinant of Fisher information matrix is maximized. The method developed has been explained using a numerical example and sensitivity carried out.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.377-389
• /
• 2024

In the present study, thermoelsatoplastic stresses and displacement for rotating hollow disks made of functionally graded materials (FGMs) has been investigated. The linear elastic-fully plastic condition is considered. The material properties except Poisson's ratio are assumed to vary in the radial direction as a power-law function. The heat conduction equation for the one-dimensional problem in cylindrical coordinates is used to obtain temperature distribution in the disk. The plastic model is based on the Tresca yield criterion and its associated flow rules under the assumption of perfectly plastic material behavior. Exact solutions of field equations for elastic and plastic deformations are obtained. It is shown that the elastoplastic response of the functionally graded (FG) disk is affected notably by the radial variation of material properties. It is also shown that, depending on material properties and disk dimensions, different modes of plastic deformation may occur.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.940-947
• /
• 2022

Meta-heuristic algorithms have found their place in optimization problems. Henry gas solubility optimization (HGSO) is one of the newest population-based algorithms. This algorithm is inspired by Henry's law of physics. To evaluate the performance of a new algorithm, it must be used in various problems. On the other hand, the optimization of the proportional-integral-derivative (PID) gains for load-following of a nuclear power plant (NPP) is a good challenge to assess the performance of HGSO. Accordingly, the power control of a pressurized water reactor (PWR) is targeted, based on the point kinetics model with six groups of delayed-neutron precursors. In any optimization problem based on meta-heuristic algorithms, an efficient objective function is required. Therefore, the integral of the time-weighted square error (ITSE) performance index is utilized as the objective (cost) function of HGSO, which is constrained by a stability criterion in steady-state operations. A Lyapunov approach guarantees this stability. The results show that this method provides superior results compared to an empirically tuned PID controller with the least error. It also achieves good accuracy compared to an established GA-tuned PID controller.

• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.116-122
• /
• 2010

원자력발전소는 심층화재방어 개념에 따라 화재 발생시 발전소 외부로 방사능의 누출을 억제하고, 발전소의 안전정지 기능이 유지될 수 있도록 설계, 건설, 운영되어야 한다. 해외의 원전건설 국가는 이러한 원자력발전소의 안전정지 기능의 목적을 달성하기 위하여 원자력발전소에 대한 통합된 화재방호 규제요건을 가지고 있으나, 우리나라의 경우, 원자력발전소의 화재방호계통을 적용하기 위한 강제 요건으로서 소방관계법과 원자력법을 동시에 적용하는 비합리적인 규제지침을 가지고 있다. 화재방호설비에 관하여 원자력발전소 운영에 오랜 경험을 가진 미국, 캐나다 및 일본의 기술적으로 단일화된 원자력발전소의 화재방호 규제체계를 제시하였고, 우리나라도 화재방호설비는 원자력법에 의한 화재하중에 따른 화재위험도분석 결과를 설계에 반영하여 소방관계법에서는 예외조항으로 인정받을 수 있어야 함을 제안하였다.

• Composites Research
• /
• 제12권2호
• /
• pp.53-61
• /
• 1999

복합재료의 파단식은 강도계수의 산정이 쉽고, 형상이 유연하며, 논리적인 단순성을 유지하기 위하여 각 파단모드와 하중조건을 고려하는 것이 바람직하다. 본 연구에서는 인장 및 비틀림의 이축하중에 대한 등가강도를 도입함으로써 새로운 파단식을 유도하였다. 이축 실험 결과는 등가이축강도가 cos($tan^{-1}R_b$)의 지수함수로 표현됨을 보였다. 이축하중의 파단강도는 일방향 인장강도 및 비틀림강도와 이축비의 함수로 예측할 수 있다. 실험 데이터의 산포성은 Weibull 분포함수와 등가이축강도 개념을 이용하여 분석하였다. 또한, 일방향 인장 및 비틀림 S-N 선도로부터 복합하중하의 S-N 선도를 구할 수 있는 피로해석법을 평면 응력 모델을 기반으로 개발하였다. 예측결과는 적층복합재료의 이축강도와 피로수명의 실험 데이터와 잘 일치하였다.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.587-593
• /
• 2017

The objective of this analytical study is to calculate the elasto-plastic stresses of Functionally Graded (FG) hyperbolic disc subjected to uniform temperature. The material properties (elastic modulus, thermal expansion coefficient and yield strength) and the geometry (thickness) of the disc are assumed to vary radially with a power law function, but Poisson's ratio does not vary. FG disc material is assumed to be non-work hardening. Radial and tangential stresses are obtained for various thickness profile, temperature and material properties. The results indicate that thickness profile and volume fractions of constituent materials play very important role on the thermal stresses of the FG hyperbolic discs. It is seen that thermal stresses in a disc with variable thickness are lower than those with constant thickness at the same temperature. As a result of this, variations in the thickness profile increase the operation temperature. Moreover, thickness variation in the discs provides a significant weight reduction. A disc with lower rigidity at the inner surface according to the outer surface should be selected to obtain almost homogenous stress distribution and to increase resistance to temperature. So, discs, which have more rigid region at the outer surface, are more useful in terms of resistance to temperature.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.325-328
• /
• 2006

This study analyzed the fluid state around a container crane according to a wind direction when a wind load was applied to a container crane. The container crane for this research is a model of a 50-ton class used broadly in the current ports. The dimension of an external fluid field is $500m{\times}200m$. This study considered the change of a wind velocity according to an altitude in a criterion of a wind velocity, 50m/s, applying a power series law. An incident angle applied to an interval of 30 degrees in $0^{\circ}C$ ${\sim}$ $180^{\circ}C$ and this study carried out a computation fluid dynamics using a CFX 10. In this study, we indicate the wind pressure and coefficient according to the height and section figure of each member. In addition, we suggest the wind load according to a wind direction.

• Advances in nano research
• /
• 제7권1호
• /
• pp.25-38
• /
• 2019

This research is aimed at studying the asymmetric thermal buckling of porous functionally graded (FG) annular nanoplates resting on an elastic substrate which are made of two different sets of porous distribution, based on nonlocal elasticity theory. Porosity-dependent properties of inhomogeneous nanoplates are supposed to vary through the thickness direction and are defined via a modified power law function in which the porosities with even and uneven type are approximated. In this model, three types of thermal loading, i.e., uniform temperature rise, linear temperature distribution and heat conduction across the thickness direction are considered. Based on Hamilton's principle and the adjacent equilibrium criterion, the stability equations of nanoporous annular plates on elastic substrate are obtained. Afterwards, an analytical solution procedure is established to achieve the critical buckling temperatures of annular nanoplates with porosities under different loading conditions. Detailed numerical studies are performed to demonstrate the influences of the porosity volume fraction, various thermal loading, material gradation, nonlocal parameter for higher modes, elastic substrate coefficients and geometrical dimensions on the critical buckling temperatures of a nanoporous annular plate. Also, it is discussed that because of present of thermal moment at the boundary conditions, porous nanoplate with simply supported boundary condition doesn't buckle.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.349-354
• /
• 2006

본 연구는 풍하중이 컨테이너 크레인에 작용할 때, 풍향에 따라서 컨테이너 크레인의 유동장을 분석하였다. 본 연구를 위해 사용된 모델은 50ton급 컨테이너 크레인으로 현재 항만시설에 가장 많이 사용되는 모델이다. 유동장은 원통으로 모델링하였으며, 직경, 300m 높이 200m로 설정하였다. 본 연구는 멱급수를 적용하여 풍속 50m/s의 설계 기준에서 고도에 따라 풍속을 고려하였다. 또한 풍향은 $0^{\circ}{\sim}180^{\circ}$ 를 $30^{\circ}$ 간격으로 적용하였으며, CFX-10을 사용하여 전산유동해석을 수행하였다. 본 연구에서는 풍향에 따른 풍압력을 분석하였으며, 향후 유동 연성 해석을 통한 컨테이너 크레인의 구조 안정성 평가를 할 것이다.

• 대한간호학회지
• /
• 제20권2호
• /
• pp.131-141
• /
• 1990

Recently, the rate of cesarean section in Korea has been increasing. The results of several previous studies in foreign countries on the emotional responses of cesarean section mothers showed that they might experience difficulties in the mother- infant interaction due to fatigue, lack of early mother - infant interaction, disappointments, anger, feelings of loss of control, and other factors. Human behavior is said to be determined by one's self concept, and self concept is influenced by both internal and external environmental factors. A scale to measure the self concept of cesarean section mothers was needed in order to identify those who might have difficulties in the mother- infant interactions in future. The purposes of this study were to develop a measuring scale, and to test its reliability and validity. The process of this study was as follows. A structured interview was done with 50 cesarean section and vaginal delivery mothers to find their state of emotional reaction after giving birth to their babies. Based on the results of the interviews, a 50 items Likert scale was developed. The self concept of 268 cesarean section and vaginal delivery mothers who were hospitalized at six hospital in seoul were measured, during the period between Feb. 1 and April 30. Reviewing the discriminating power of each item by means of crosstabulation, ten items were selected for the final scale. The reliability and validity of this ten item scale were tested by Cronbach's alpha and t-test, using spss pc＋package. The results of this study and recommendation are as follows. 1. The ten selected items were as follows. I feel pains in my breast. (－) I have a good appetite now. (＋) I feel pains in my flank. (－) I feel fine now. (＋) My body seems to have returned to its prepregnant state. (＋) Thinking of the delivery process, I feel sorry. (－) I want to hold my baby in my arms. (＋) I want to keep my own life, even if I became a mother. (－) I want to delegate the care of the baby to my mother / mother in law. (－) I think baby is my alter ego. (＋) 2. The reliability of this scale was tested by Cronbach's alpha, and the coefficient of this scale was .8066. 3. The construct validity of this scale was tested by means of known group methods. The value of self concept for cesarean section mother was significantly lower than for vaginal delivery mothers(t＝-5.51, df＝266, p＝0.007). 4. The criterion validity of this scale was tested indirectly. Though this scale could discriminate the differences in the self concept between cesarean section and vaginal delivery mothers, the five items on the personal self concept scale didn's show any differences between cesarean section and vaginal delivery mothers. Therefore, the study indicates that those who shows lower values in the personal self concept measurement, that is, lower than 12.03 points, could be regaled as “risk mothers” 5. Further studies using this scale to clarify the influencing factors on negative self concept are strongly recommended.